content loaded
Image may not be the actual product. Please refer to the full technical specs and MPN for exact details.
Available for Purchase
Get a delivery date for my location
Subject to factory lead times
Option to use your account at checkout
$169.50
QTY:
Available for Purchase
Get a delivery date for my location
Subject to factory lead times
Option to use your account at checkout
$169.50
QTY:
Our experts are here to help.
Call (866) 703-5665 for Expedited Shipping, Delivery Date, Product Questions & Help
Our experts are here to help.
Call (866) 703-5665 for Expedited Shipping, Delivery Date, Product Questions & Help
Overview:
Flange mounting, Series MF1, MF2. Mounting hardware for installing the corresponding pneumatic component on machine framework. Specified by machine builders for component anchoring and alignment on automation equipment. Available from us as an authorized Aventics distributor with manufacturer warranty.
Features:
- Aventics Head Rectangular Flange (MF1) / Cap Rectangular Flange (MF2) cylinder mounting accessory (Series CM1)
- Mount style: NFPA MF1 — 1-1/2" through 6" (MF1); 1-1/2" through 8" (MF2) bore range
- Rectangular flange mount accessory. MF1 mounts on the head end (rod end); MF2 mounts on the cap end. Bolts the cylinder to a stationary surface; preferred when load is in-line with the rod. Steel or aluminum construction with NFPA-standard hole pattern.
- NFPA-standard hole pattern (NFPA T3.6.7 R1) for direct bolt-up to compatible cylinders
- Steel construction (typical); zinc-plated or painted finish for corrosion protection
- Sized by cylinder bore — multiple bore brackets available
- Compatible cylinder lines: TaskMaster pneumatic, PowerMaster PPT/PHT, PressureMaster HHT, Series A NFPA Interchangeable Aluminum, and ISO 15552 PRA / TRB profile and tie-rod cylinders
- Sold as a mounting kit (pair, with pivot pins or mounting bolts where applicable)
Specifications:
- Series: CM1 cylinder mounting accessory — Head Rectangular Flange (MF1) / Cap Rectangular Flange (MF2)
- Mount style: NFPA MF1
- Bore range: 1-1/2" through 6" (MF1); 1-1/2" through 8" (MF2)
- Description: Rectangular flange mount accessory. MF1 mounts on the head end (rod end); MF2 mounts on the cap end. Bolts the cylinder to a stationary surface; preferred when load is in-line with the rod. Steel or aluminum construction with NFPA-standard hole pattern.
- Function: Cylinder mounting hardware (not a cylinder itself)
- Compatible cylinder series:
- - TaskMaster pneumatic (200 psi air)
- - PowerMaster PPT pneumatic (250 psi) / PHT hydraulic (1500 psi)
- - PressureMaster HHT high-pressure hydraulic (3000 psi nominal / 5000 psi non-shock)
- - Series A NFPA Interchangeable Aluminum cylinder (1-1/2" through 6" bore)
- - ISO 15552 PRA profile and TRB tie-rod cylinders
- Standard: NFPA T3.6.7 R1 mounting interchange
- Material: Steel (typical), zinc-plated or painted; pivot pins where applicable
- Mounting hardware: Sold as a kit; specific bolt sizes per bore bracket
- Notes: Maximum operating pressure for MF1/MF2 depends on bore; consult NFPA Steel Cylinder Catalog page 13. Compatible with TaskMaster, PowerMaster, PressureMaster, and Series A cylinders.
- Application guidance: Ensure mount style suits load direction — fixed clevis (MP1) for swinging in-line loads; rectangular flange (MF1/MF2) for axial loads in line with the rod; side lugs (MS2) for axial loads where the cylinder is bolted to a flat surface. For high side loads or shock service, specify stop tubes on the cylinder and consider thrust key retainer (MS2/MS4/MS7 PressureMaster).
"Our mission is to be regarded by our customers and our community as the best supplier of automation and control product solutions to industry."
Michael R Gallagher
Centro President
QTY: