content loaded
Image may not be the actual product. Please refer to the full technical specs and MPN for exact details.
Available for Purchase
Get a delivery date for my location
Subject to factory lead times
Option to use your account at checkout
$663.55
QTY:
Soft Seat, Flange x Flange, 316 Stainless Steel, Flare Pattern™, 0.375" Orifice 5 Manifold Valve
MPN: 5530-MMS-FP
Available for Purchase
Get a delivery date for my location
Subject to factory lead times
Option to use your account at checkout
$663.55
QTY:
Our experts are here to help.
Call (866) 703-5665 for Expedited Shipping, Delivery Date, Product Questions & Help
Our experts are here to help.
Call (866) 703-5665 for Expedited Shipping, Delivery Date, Product Questions & Help
Attributes:View Additional Documents
| Type: | Manifold Valve | Warranty Length: | 3 yr |
Overview:
Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applicationsFlare Pattern™ valve configuration provides maximum clearance for fingers during operationSoft tip valves feature a patented Acetal non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
Features:
- Two static (test) ports
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- -4
- Non-rotating stem tip standard on isolation valves
- All stems are 316 Stainless Steel
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Soft seat design has 6,000 psi pressure rating at 200 ºF
- Available in block, single flange, or double flange connection for remote or direct installation
- color coded vinyl bonnet and stem dust cap
- Non-rotating stem tip standard on large bore shut-off valves
- Features a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning on the block valves
- Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation "T" handles (HL8) and equalizing/vent 1-3/8" mini "T" handles (HL7). The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle on the 5530-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
- 100% helium leak tested to 1 x 10
- Slotted spring pin to prevent accidental loosening
- Blow-out proof stem provides a secondary stem seal in the full open position
- All stem threads are rolled for strength and ease of operation
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
- ml/s for guaranteed performance and reliability
- Vinyl dust caps for bonnets and stems
- patented soft tip stem design on equalizing and vent valves.
"Our mission is to be regarded by our customers and our community as the best supplier of automation and control product solutions to industry."
Michael R Gallagher
Centro President
QTY: