content loaded

Overview:

IC/SP interchangeable cartridge style thermostatic scald protection valve protects facility personnel from excessively hot temperatures being released from safety showers, facewash, and eyewash stations. The IC/SP valve should be installed within the heated system and is purely water temperature sensing. The valve will initiate flow when the thermostatic actuator senses water temperature above the valve's set-point (typically 98°F [36.7°C]) and will remain open as long as the discharge water temperature is within 10˚F of the open set-point (typically above 95°F [35°C]). The thermal actuator is always wetted, making this valve preferable for heat traced lines where scald protection flow is not required unless heat tracing fails.

Features:

  • Brass or stainless steel body, fittings, and plugs
  • IC/SP temperatures up to 105°F meet ANSI Z358.1 standards
  • Protects safety showers from over-temperature conditions, keeping personnel safe
  • Exclusive Thermoloid® thermal actuator
  • Self-operating, no power or signal required
  • Designed to be Tee'd into larger diameter pipe lines
Quote

"Our mission is to be regarded by our customers and our community as the best supplier of automation and control product solutions to industry."

Michael R Gallagher

Centro President

QTY:

3/4IC/SP-110
Image may not be the actual product. Please refer to the full technical specs and MPN for exact details.
3/4IC/SP-110

MPN: 195-000000-110

Part # 195-000000-110

$242.18
$250.00 You save 3%