Centrifugal Metallic/Non-Metallic Sealed Pumps - Mosherflo Pumps
Centrifugal pumps are the most common types used in industrial and commercial applications. They can move large volumes of fluids, making them ideal for water treatment plants, oil refineries, and other high-demand environments. Centrifugal pumps come in various styles, including self-priming and submersible models. Centro offers a complete selection of centrifugal pumps available online, making it easy to find the right pump for your needs. Whether you're looking for a centrifugal water pump or a self-priming model, Centro has the perfect pump for your application.
Filter
Filter
912 items
content loaded
MPN:DG1-AA-1.5X1-62-BPA-CD4
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-62-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL)
PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING CARRIER (HOUSING)
LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME
BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS
CASE GASKET TFE
FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME)
SNAP RING, BEARING
SCREW BEARING HOUSING
SCREW BEARING CARRIER
SCREW FOOT
LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING CARRIER (2)
(G3 ONLY) BEARING CLAMP
COMES WITH ****KEY ATTACHED*****
TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-62-CD4
MFPG-CD4 (SS) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, CD4/316SS COVER, CD4/316SS 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-62-WCB
WCB(IRON) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, WCB/DI COVER, WCB/DI 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-82-BPA-CD4
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-82-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL)
PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING CARRIER (HOUSING)
LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME
BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS
CASE GASKET TFE
FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME)
SNAP RING, BEARING
SCREW BEARING HOUSING
SCREW BEARING CARRIER
SCREW FOOT
LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING CARRIER (2)
(G3 ONLY) BEARING CLAMP
COMES WITH ****KEY ATTACHED*****
TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-82-CD4
MFPG-CD4 (SS) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, CD4/316SS COVER, CD4/316SS 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-62-BPA-CD4
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-62-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL)
PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING CARRIER (HOUSING)
LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME
BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS
CASE GASKET TFE
FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME)
SNAP RING, BEARING
SCREW BEARING HOUSING
SCREW BEARING CARRIER
SCREW FOOT
LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING CARRIER (2)
(G3 ONLY) BEARING CLAMP
COMES WITH ****KEY ATTACHED*****
TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-82-BPA-CD4
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-82-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL)
PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING CARRIER (HOUSING)
LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME
BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS
CASE GASKET TFE
FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME)
SNAP RING, BEARING
SCREW BEARING HOUSING
SCREW BEARING CARRIER
SCREW FOOT
LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING CARRIER (2)
(G3 ONLY) BEARING CLAMP
COMES WITH ****KEY ATTACHED*****
TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-82-WCB
WCB(IRON) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, WCB/DI COVER, WCB/DI 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-62-BPA-CD4
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-62-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL)
PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING CARRIER (HOUSING)
LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME
BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS
CASE GASKET TFE
FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME)
SNAP RING, BEARING
SCREW BEARING HOUSING
SCREW BEARING CARRIER
SCREW FOOT
LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING CARRIER (2)
(G3 ONLY) BEARING CLAMP
COMES WITH ****KEY ATTACHED*****
TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-62-CD4
MFPG-CD4 (SS) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, CD4/316SS COVER, CD4/316SS 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-62-WCB
WCB(IRON) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, WCB/DI COVER, WCB/DI 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-82-BPA-CD4
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-82-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL)
PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING CARRIER (HOUSING)
LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME
BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS
CASE GASKET TFE
FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME)
SNAP RING, BEARING
SCREW BEARING HOUSING
SCREW BEARING CARRIER
SCREW FOOT
LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING CARRIER (2)
(G3 ONLY) BEARING CLAMP
COMES WITH ****KEY ATTACHED*****
TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-1.5X1-82-CD4
MFPG-CD4 (SS) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, CD4/316SS COVER, CD4/316SS 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-62-BPA-CD4
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-62-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL)
PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING CARRIER (HOUSING)
LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME
BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS
CASE GASKET TFE
FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME)
SNAP RING, BEARING
SCREW BEARING HOUSING
SCREW BEARING CARRIER
SCREW FOOT
LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING CARRIER (2)
(G3 ONLY) BEARING CLAMP
COMES WITH ****KEY ATTACHED*****
TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-82-BPA-CD4
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-82-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL)
PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING CARRIER (HOUSING)
LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME
BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS
CASE GASKET TFE
FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME)
SNAP RING, BEARING
SCREW BEARING HOUSING
SCREW BEARING CARRIER
SCREW FOOT
LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING CARRIER (2)
(G3 ONLY) BEARING CLAMP
COMES WITH ****KEY ATTACHED*****
TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:DG1-AA-3X1.5-82-WCB
WCB(IRON) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, WCB/DI COVER, WCB/DI 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS
Requires Quote
Available for Purchase
Subject to factory lead times
FAQS
- A centrifugal pump uses an impeller to create rotational energy that moves fluid through the pump. As the impeller spins, it increases fluid velocity and converts it into pressure, allowing the pump to transfer liquid efficiently.
- Centrifugal pumps are used for water transfer, HVAC systems, irrigation, chemical processing, industrial fluid circulation, boiler feed, cooling systems, and general plant operations. They are ideal for clean or lightly contaminated fluids.
- Common types include end suction pumps, inline pumps, multistage pumps, self priming pumps, magnetic drive pumps, and ANSI process pumps. Each style is designed for specific flow, pressure, and installation needs.
- To size a centrifugal pump, determine required flow rate (GPM), total dynamic head (TDH), fluid type, temperature, suction conditions, and available power. Reviewing the manufacturer’s pump curves helps identify the right model.
- A non metallic sealed pump is a centrifugal pump built using corrosion resistant materials such as polypropylene, PVDF, or other engineered plastics. It uses a mechanical seal to prevent leakage, making it ideal for chemical and industrial fluid transfer.
- These pumps are used for chemical processing, wastewater treatment, plating, etching, semiconductor manufacturing, agriculture, and any application requiring corrosion resistant fluid handling.
- Non metallic pumps offer superior resistance to corrosive chemicals, acids, caustics, and aggressive industrial liquids. They are also lightweight, cost effective, and often longer lasting in harsh chemical environments.