Categories from Nordfab Ducting (1)

Nordfab’s ultra flex steel hose is for applications involving higher temperatures or abrasive material. Assembly is provided with Quick-Fit® ends to easily connect additional assemblies

Flexible steel hose for higher temperature or abrasive material. Available in Galvanized or 304 Stainless Steel Temperature rating: Galvanized steel max 390° F / Stainless steel max 1500° F Diameters 3″ – 6″ can be sold in 5′ increments of up to a 25′ maximum length, examples 5', 10', 15', 20', 25'. Diameters 7″ – 8″ are sold in 5′ increments only. If lengths longer than 5′ are needed, Nordfab can supply 5′ Hose Assemblies with Quick-Fit® ends or flanged ends to easily connect additional assemblies or for connection to equipment and ductwork. Raw (plain) ends standard.

Flexible steel hose for higher temperature or abrasive material. Available in Galvanized or 304 Stainless Steel Temperature rating: Galvanized steel max 390° F / Stainless steel max 1500° F Diameters 3″ – 6″ can be sold in 5′ increments of up to a 25′ maximum length, examples 5', 10', 15', 20', 25'. Diameters 7″ – 8″ are sold in 5′ increments only. If lengths longer than 5′ are needed, Nordfab can supply 5′ Hose Assemblies with Quick-Fit® ends or flanged ends to easily connect additional assemblies or for connection to equipment and ductwork. Raw (plain) ends standard.

Flexible steel hose for higher temperature or abrasive material. Available in Galvanized or 304 Stainless Steel Temperature rating: Galvanized steel max 390° F / Stainless steel max 1500° F Diameters 3″ – 6″ can be sold in 5′ increments of up to a 25′ maximum length, examples 5', 10', 15', 20', 25'. Diameters 7″ – 8″ are sold in 5′ increments only. If lengths longer than 5′ are needed, Nordfab can supply 5′ Hose Assemblies with Quick-Fit® ends or flanged ends to easily connect additional assemblies or for connection to equipment and ductwork. Raw (plain) ends standard.

Flexible steel hose for higher temperature or abrasive material. Available in Galvanized or 304 Stainless Steel Temperature rating: Galvanized steel max 390° F / Stainless steel max 1500° F Diameters 3″ – 6″ can be sold in 5′ increments of up to a 25′ maximum length, examples 5', 10', 15', 20', 25'. Diameters 7″ – 8″ are sold in 5′ increments only. If lengths longer than 5′ are needed, Nordfab can supply 5′ Hose Assemblies with Quick-Fit® ends or flanged ends to easily connect additional assemblies or for connection to equipment and ductwork. Raw (plain) ends standard.

Flexible steel hose for higher temperature or abrasive material. Available in Galvanized or 304 Stainless Steel Temperature rating: Galvanized steel max 390° F / Stainless steel max 1500° F Diameters 3″ – 6″ can be sold in 5′ increments of up to a 25′ maximum length, examples 5', 10', 15', 20', 25'. Diameters 7″ – 8″ are sold in 5′ increments only. If lengths longer than 5′ are needed, Nordfab can supply 5′ Hose Assemblies with Quick-Fit® ends or flanged ends to easily connect additional assemblies or for connection to equipment and ductwork. Raw (plain) ends standard.

Flexible steel hose for higher temperature or abrasive material. Available in Galvanized or 304 Stainless Steel Temperature rating: Galvanized steel max 390° F / Stainless steel max 1500° F Diameters 3″ – 6″ can be sold in 5′ increments of up to a 25′ maximum length, examples 5', 10', 15', 20', 25'. Diameters 7″ – 8″ are sold in 5′ increments only. If lengths longer than 5′ are needed, Nordfab can supply 5′ Hose Assemblies with Quick-Fit® ends or flanged ends to easily connect additional assemblies or for connection to equipment and ductwork. Raw (plain) ends standard.

Nordfab’s Flexible Rigid Steel Hose is excellent for applications involving higher temperatures or abrasive material. Available in galvanized or 304 Stainless Steel. Temperature rating: Galvanized steel max 390° F / Stainless steel max 1500° F Diameters 1.5″ – 6″ can be sold in 5′ increments of up to a 25′ maximum length. Diameters 7″ – 14″ are sold in 5′ increments only. If lengths longer than 5′ are needed, we can supply 5’ hose assemblies with Quick-Fit or flanged ends to easily connect additional assemblies. Raw ends are standard.

Flanged Branches (sometimes called “wyes” or “laterals”) are standard with industry-standard Angle Flanges on both ends, the flanges are retained via a vanstone lip so that bolt holes can easily be aligned with those on existing flanged connections. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, optional end types, larger sizes, and material / gauge options.

QF Branches (sometimes called “wyes” or “laterals”) are standard with QF rolled ends, allowing quick connections with other QF ductwork. A - C ≥ C-B. Use formula to determine if a reducer is needed at C. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

QF Branches (sometimes called “wyes” or “laterals”) are standard with QF rolled ends, allowing quick connections with other QF ductwork. A - C ≥ C-B. Use formula to determine if a reducer is needed at C. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are also available with 60º angle between legs. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Flanged Branches (sometimes called “wyes” or “laterals”) are standard with industry-standard Angle Flanges on both ends, the flanges are retained via a vanstone lip so that bolt holes can easily be aligned with those on existing flanged connections. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, optional end types, larger sizes, and material / gauge options.

Flanged Branches (sometimes called “wyes” or “laterals”) are standard with industry-standard Angle Flanges on both ends, the flanges are retained via a vanstone lip so that bolt holes can easily be aligned with those on existing flanged connections. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, optional end types, larger sizes, and material / gauge options.

QF Double Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. (A - C) ≥ (C-B) and (C) ≥ (D). Use formula above to determine if a reducer is needed at C or D. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

QF Double Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. (A - C) ≥ (C-B) and (C) ≥ (D). Use formula above to determine if a reducer is needed at C or D. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

QF Branches (sometimes called “wyes” or “laterals”) are standard with QF rolled ends, allowing quick connections with other QF ductwork. A - C ≥ C-B. Use formula to determine if a reducer is needed at C. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

QF Branches (sometimes called “wyes” or “laterals”) are standard with QF rolled ends, allowing quick connections with other QF ductwork. A - C ≥ C-B. Use formula to determine if a reducer is needed at C. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Quick-Fit® In Cuts, also known as Saddle Taps, are standard with QF rolled ends, allowing quick connections with other QF® ductwork. Cut Ins are used to cut into existing duct lines to begin a new Quick-Fit (QF) section. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Our Quick-Fit® Suction Nozzle Assembly can be affixed to the end of hose for quick, easy suction cleaning in your workspace. Quick-Fit ducting has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Our Quick-Fit® Suction Nozzle Assembly can be affixed to the end of hose for quick, easy suction cleaning in your workspace. Quick-Fit ducting has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.