Filtration - Nordfab Ducting

Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are also available with 60º angle between legs. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Nordfab Angle Flanges are industry standard sizes and hole patterns. Contact Nordfab or your local Nordfab dealer for assistance with larger sizes and material / custom options.

Nordfab’s QF® Angle Flange Adapter is fitted with an industry standard Angle Flange on one end and a Quick-Fit (QF) rolled edge at the other, allowing quick connection of QF duct pipe or fittings to flanged pipes or fittings. If a custom bolt hole pattern is required, specify a Flat Flange (FFL) instead of an Angle Flange (ANGFL) and provide the hole pattern. If no hole pattern drawing is provided, flat flange will be blank. Flanges are retained with a Van Stone lip allowing easy rotation and alignment during installation.Contact Nordfab or your local Nordfab dealer for assistance with larger sizes and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Our Silicone Flange Gasket is for use with Nordfab flanged ductwork, Nordfab Angle Flanges, or Angle Flange Adapters. Gasket dimensions match our industry-standard Angle Flange dimensions. Silicone material is optimal for higher temperature applications. Silicone temperature range -65° to 450°. Silicone gaskets are red in color. One gasket should be used per joint.

Used to reduce backward air flow in the line. Designed for use in a horizontal line. Specify if vertical operation is required. Not an explosion isolation device. Flanged ends – rotational Angle Flanges retained via Vanstone lip Contact Nordfab or your local Nordfab dealer for assistance with smaller or larger sizes and material / gauge options.

Nordfab’s Quick-Fit® Manual Blast Gate allows quick, manual shut-off of a section of ductwork. This blast gate (damper) is constructed of a cast aluminum body with a galvanized steel blade and a standard Quick-Fit (QF) connection collar, unless otherwise specified. The SS model is 100% Stainless Steel, body and blade are heavy duty 12 gauge. Contact Nordfab or your local Nordfab dealer for assistance with larger sizes and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Nordfab’s Quick-Fit® Barrel Hood is designed to fit 55 gallon drums and provide a fast connection to Quick-Fit ductwork to capture air contaminants and dust in barrel-filling applications. Contact Nordfab or your local Nordfab dealer for assistance with larger sizes, end options, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

The Nordfab Bridge Hose Clamp is used to fasten our black rubber hose, clear rubber hose or static dissipative hose to our hose adapter, other duct fittings, or to your machines. The Bridge Hose Clamp conforms to the wire helix in hose to provide a more secure fit than many hose clamps. 304 stainless steel construction.

Our Quick-Fit® Bleed In Valve is used to adjust airflow to balance your dust collection system by introducing ambient air. Contact Nordfab or your local Nordfab dealer for assistance with larger sizes and material / gauge options. Quick-Fit ducting has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Installed in ducting as part of a dust collection system, the Nordfab Quick-Fit® Ball Joint allows up to 22° of movement off-center. The swivel movement allows flexibility in the duct, allowing it to rotate in all directions. The Ball Joint has 360° directional capability and an angle from 0°-22°, depending on the application. Contact Nordfab or your local Nordfab dealer for assistance with larger sizes and end type options. Quick-Fit ducting has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

Nordfab’s QF® Bell Mouth Hood has a flared end to increase the capture ratio of air, dust, and smoke as well as increase laminar air flow. The QF (rolled edge) end allows quick connection to Nordfab duct fittings. Contact Nordfab or your local Nordfab dealer for assistance with larger sizes, end options, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.