Manifold Valves - Tescom Anderson Greenwood

Manifold valves are used in fluid handling systems to control the flow of liquids. They consist of multiple valve outlets connected to a single inlet, allowing for precise regulation of flow rates, direction, and isolation of different fluid paths. Browse our selection below or contact us to speak to a product expert.

Filters
Filters
27 RESULTS
content loaded
A modular mounting system that provides close coupling to the orifice tap and full porting to reduce any possible measurement inaccuracy through induced square root error.
Configure Product

Configure product to see pricing

A differential pressure manifold with two block valves, an equalizer valve and two instrument side vent/calibrate valves.
Configure Product

Configure product to see pricing

Lightweight and compact 5 valve manifold designed for direct mounting to differential pressure transmitters.
Configure Product

Configure product to see pricing

A direct mounting two-valve manifold which combines an isolation valve and a vent/calibrate valve in a single unit for static pressures.
Configure Product

Configure product to see pricing

Rack or panel-mounted 5 valve manifold to ASME B31.1 or B31.3 which meets MSS SP-105 for pressures to 6000 psig (414 barg), Class 2500.
Configure Product

Configure product to see pricing

A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument.
Configure Product

Configure product to see pricing

A three or five valve harness manifold for use with orifice meters in natural gas service at pressures to 6000 psig (414 barg).
Configure Product

Configure product to see pricing

Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg).
Configure Product

Configure product to see pricing

TESCOM AGI Model M25/25A/25B/251/251B Manifold

Configure product to see pricing

Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit.
Configure Product

Configure product to see pricing

Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit.
Configure Product

Configure product to see pricing

A compact manifold incorporating a PTFE-packed valve. This single valve serves to equalize a differential pressure transmitter at pressures up to 6000 psig (414 barg).
Configure Product

Configure product to see pricing

Differential pressure manifolds with two ⅜ (9.5 mm) orifice soft-seated block valves and a metal seated equalizer valve for direct or remote mounting at pressures to 6000 psig (414 barg).
Configure Product

Configure product to see pricing

A modular mounting system that provides close coupling to the orifice tap and full porting to reduce any possible measurement inaccuracy through induced square root error.
Configure Product

Configure product to see pricing

A differential pressure manifold with two block valves, an equalizer valve and two instrument side vent/calibrate valves.
Configure Product

Configure product to see pricing

Lightweight and compact 5 valve manifold designed for direct mounting to differential pressure transmitters.
Configure Product

Configure product to see pricing

A direct mounting two-valve manifold which combines an isolation valve and a vent/calibrate valve in a single unit for static pressures.
Configure Product

Configure product to see pricing

Rack or panel-mounted 5 valve manifold to ASME B31.1 or B31.3 which meets MSS SP-105 for pressures to 6000 psig (414 barg), Class 2500.
Configure Product

Configure product to see pricing

A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument.
Configure Product

Configure product to see pricing

A three or five valve harness manifold for use with orifice meters in natural gas service at pressures to 6000 psig (414 barg).
Configure Product

Configure product to see pricing

Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg).
Configure Product

Configure product to see pricing

TESCOM AGI Model M25/25A/25B/251/251B Manifold

Configure product to see pricing

Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit.
Configure Product

Configure product to see pricing

Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit.
Configure Product

Configure product to see pricing

A compact manifold incorporating a PTFE-packed valve. This single valve serves to equalize a differential pressure transmitter at pressures up to 6000 psig (414 barg).
Configure Product

Configure product to see pricing

Differential pressure manifolds with two ⅜ (9.5 mm) orifice soft-seated block valves and a metal seated equalizer valve for direct or remote mounting at pressures to 6000 psig (414 barg).
Configure Product

Configure product to see pricing