What are specialty pneumatic cylinders?

Specialty pneumatic cylinders are purpose-built actuators designed for specific applications or conditions that standard cylinders cannot adequately serve. Common types include sine cylinders (providing smooth sinusoidal acceleration for handling delicate products), load-stopping cylinders (safely decelerating moving loads at any stroke point), locking cylinders (mechanically locking the rod when air is removed for fail-safe holding), tandem cylinders (two pistons in series for double force in the same bore size), multi-position cylinders (stopping at three or more positions), and cylinders rated for extreme environments such as high temperature, corrosive, clean room, food-grade, or underwater applications.

What industries and applications use specialty pneumatic cylinders?

Food and beverage manufacturing uses FDA-compliant, washdown-rated stainless steel cylinders for daily high-pressure cleaning. Pharmaceutical and clean room manufacturing uses low-particle, specially sealed cylinders. Automotive and metalworking uses weld spatter-resistant cylinders in welding cells and high-temperature cylinders near furnaces. Semiconductor manufacturing uses ultra-clean, non-outgassing cylinders. Marine applications use corrosion-resistant cylinders rated for saltwater. Packaging of delicate products uses sine cylinders for smooth acceleration. Vertical lifting uses locking cylinders that hold loads if air pressure is lost, preventing dangerous drops.

What is a tandem pneumatic cylinder and when is it used?

A tandem cylinder has two pistons connected in series on a common rod inside one body. Both are pressurized simultaneously, producing approximately double the force of a single-piston cylinder of the same bore size. Tandem cylinders are used when more force is needed than a single cylinder of the available bore can provide, but there is not enough space for a larger-bore cylinder. By doubling force without increasing bore diameter, it fits the same cross-sectional space while delivering next-larger-bore-size force. The trade-off is greater length. They are commonly used in pressing, clamping, and punching applications requiring high force in limited-diameter spaces.

What is a locking pneumatic cylinder and why is it important for safety?

A locking cylinder has a built-in mechanical lock that clamps the piston rod in position when air is removed or lost. Standard cylinders allow the piston to move freely when pressure changes — if air is lost while supporting a raised load, the load falls. A locking cylinder prevents this with a spring-engaged, air-released mechanism: the lock is normally engaged by spring force and only releases when air pressure is applied to the lock port. This means the cylinder automatically locks on air loss, providing fail-safe holding. Locking cylinders are critical for vertical lifting, press applications requiring position holding during processes, and any application where uncontrolled motion from air loss could cause injury or damage.

How do I determine if my application needs a specialty cylinder?

Consider a specialty cylinder when your application exceeds standard cylinder capabilities in these areas: Environmental conditions — extreme temperatures, corrosive chemicals, washdown, food contact, clean room, or underwater operation. Motion profile — smooth shock-free motion for delicate products (sine cylinder), mid-stroke stopping (multi-position), or load deceleration (load-stopping). Safety — supporting loads that could fall on air loss (locking cylinder) or operating in hazardous atmospheres. Force — needing more force than the largest bore that fits the space (tandem). Centro's product specialists can evaluate whether your application needs a specialty design or if a standard cylinder with accessories can meet the requirements.

Specialty Cylinders

Specialty cylinders handle applications standard cylinders can't, such as extreme temperatures, washdown, tight spaces or unusual motion.

Specialty Cylinder Types

Stainless steel cylinders – food and washdown
High-temperature cylinders – heat-resistant seals
Low-friction cylinders – smooth, precise motion
Locking cylinders – hold position on air loss
Custom cylinders – built to specification

Specifying a Cylinder

Provide bore, stroke, environment, mounting and special requirements.

Centro supplies specialty cylinders.

Filter

In Stock Only

Filter

165 items

Sort by:

content loaded

Compare

Aventics

22X106 Single BAR_TYPE 230 R431010060

MPN:R431010060

22X106 Single BAR_TYPE 230 R431010060. Pneumatic accessory used in air-driven equipment and process machinery. Configured with 22″ × 106″ dimensional reference. Specified by machine builders for pneumatic system integration on assembly, packaging, and material-handling equipment. Stocked through our authorized Aventics distribution channel.

Requires Quote

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000794 - Double piston cylinder, Series TWC

MPN:R402000794

Double piston cylinder, Series TWC. Pneumatic linear actuator for stroke-and-return duty on industrial equipment. Used in OEM-built equipment for clamping, ejecting, and stroking duty on production lines. Stocked through our authorized Aventics distribution channel.

$319.81

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000799 - Double piston cylinder, Series TWC

MPN:R402000799

Double piston cylinder, Series TWC. Industrial pneumatic cylinder for repeatable linear motion in factory equipment. Used in OEM-built equipment for clamping, ejecting, and stroking duty on production lines. Stocked through our authorized Aventics distribution channel.

$401.55

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000805 - Double piston cylinder, Series TWC

MPN:R402000805

Double piston cylinder, Series TWC. Cylinder component for pneumatic linear actuation across machine builds and OEM equipment. Common on assembly lines, packaging equipment, and OEM machinery where cylinder actuation drives a process step. Available from us as an authorized Aventics distributor with manufacturer warranty.

$500.53

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000806 - Double piston cylinder, Series TWC

MPN:R402000806

Double piston cylinder, Series TWC. Air-driven cylinder providing controlled linear force in automation systems. Common on assembly lines, packaging equipment, and OEM machinery where cylinder actuation drives a process step. Available from us as an authorized Aventics distributor with manufacturer warranty.

$451.51

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000808 - Double piston cylinder, Series TWC

MPN:R402000808

Double piston cylinder, Series TWC. Pneumatic linear actuator suited to OEM machine integration. Common on assembly lines, packaging equipment, and OEM machinery where cylinder actuation drives a process step. Available from us as an authorized Aventics distributor with manufacturer warranty.

$500.53

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000810 - Double piston cylinder, Series TWC

MPN:R402000810

Double piston cylinder, Series TWC. Air-cylinder component for compressed-air-driven linear motion on machine builds. Used across machine building, automation, and material-handling applications requiring linear pneumatic motion. Available from us as an authorized Aventics distributor with manufacturer warranty.

$549.21

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000813 - Double piston cylinder, Series TWC

MPN:R402000813

Double piston cylinder, Series TWC. Pneumatic cylinder for linear motion in factory automation and process equipment. Used across machine building, automation, and material-handling applications requiring linear pneumatic motion. Available from us as an authorized Aventics distributor with manufacturer warranty.

$635.26

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000835 - Double piston cylinder, Series TWC

MPN:R402000835

Double piston cylinder, Series TWC. Pneumatic linear actuator suited to OEM machine integration. Found across automated machinery, packaging stations, and material-transfer equipment. Available from us as an authorized Aventics distributor with manufacturer warranty.

$811.39

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000839 - Double piston cylinder, Series TWC

MPN:R402000839

Double piston cylinder, Series TWC. Pneumatic linear actuator for stroke-and-return duty on industrial equipment. Found across automated machinery, packaging stations, and material-transfer equipment. Available from us as an authorized Aventics distributor with manufacturer warranty.

$696.50

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000843 - Double piston cylinder, Series TWC

MPN:R402000843

Double piston cylinder, Series TWC. Industrial pneumatic cylinder for repeatable linear motion in factory equipment. Integrates into OEM machine builds where compressed-air-driven linear motion controls a stage of the production cycle. Available from us as an authorized Aventics distributor with manufacturer warranty.

$840.18

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

Aventics R402000845 - Double piston cylinder, Series TWC

MPN:R402000845

Double piston cylinder, Series TWC. Air cylinder for converting compressed air into linear motion in machine builds. Integrates into OEM machine builds where compressed-air-driven linear motion controls a stage of the production cycle. Available from us as an authorized Aventics distributor with manufacturer warranty.

$913.70

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Aventics

BRI Port Stbd ECR R431001329

MPN:R431001329

BRI Port Stbd ECR R431001329. Pneumatic system part for OEM machine builds, automation cells, and air-driven equipment. Common on automation lines, industrial machinery, and OEM-built compressed-air systems. Stocked through our authorized Aventics distribution channel.

$2,047.84

placeholder

Available for Purchase

Subject to factory lead times

QTY:

Compare

Specialty Cylinders

Specialty Cylinder Types

Specifying a Cylinder

$319.81

$401.55

$500.53

$451.51

$500.53

$549.21

$635.26

$811.39

$696.50

$840.18

$913.70

$2,047.84

$121.70$139.09

$121.70$139.09

$147.02$168.02

$147.02$168.02

$161.52$184.58

$161.52$184.58

$149.13$170.43

$149.13$170.43

$174.39$199.30

$174.39$199.30

$188.93$215.91

$319.81

$401.55

$500.53

$451.51

$500.53

$549.21

$635.26

$811.39

$696.50

$840.18

$913.70

$2,047.84

$121.70$139.09

$121.70$139.09

$147.02$168.02

$147.02$168.02

$161.52$184.58

$161.52$184.58

$149.13$170.43

$149.13$170.43

$174.39$199.30

$174.39$199.30

$188.93$215.91

Orders & purchases

Divisions