Centrifugal Metallic/Non-Metallic Sealed Pumps

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST) IB AND OB BEARINGS. PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST) BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING JACK BOLT, BEARING HOUSING BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) IB AND OB BEARINGS (TIMKEN OR EQUAL) PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER ) BEARING CARRIER (HOUSING) LOCKNUT, BEARING COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST) BEARING FRAME BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS CASE GASKET TFE FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME) SNAP RING, BEARING SCREW BEARING HOUSING SCREW BEARING CARRIER SCREW FOOT LOCKWASHER, BEARING COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE BEARING HOUSING JACKBOLT JAMNUTS O-RING BEARING CARRIER (2) (G3 ONLY) BEARING CLAMP COMES WITH ****KEY ATTACHED***** TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)

MFPG-CD4 (SS) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, CD4/316SS COVER, CD4/316SS 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS

WCB(IRON) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, WCB/DI COVER, WCB/DI 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST) IB AND OB BEARINGS. PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST) BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING JACK BOLT, BEARING HOUSING BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) IB AND OB BEARINGS (TIMKEN OR EQUAL) PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER ) BEARING CARRIER (HOUSING) LOCKNUT, BEARING COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST) BEARING FRAME BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS CASE GASKET TFE FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME) SNAP RING, BEARING SCREW BEARING HOUSING SCREW BEARING CARRIER SCREW FOOT LOCKWASHER, BEARING COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE BEARING HOUSING JACKBOLT JAMNUTS O-RING BEARING CARRIER (2) (G3 ONLY) BEARING CLAMP COMES WITH ****KEY ATTACHED***** TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)

MFPG-CD4 (SS) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, CD4/316SS COVER, CD4/316SS 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST) IB AND OB BEARINGS. PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST) BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING JACK BOLT, BEARING HOUSING BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) IB AND OB BEARINGS (TIMKEN OR EQUAL) PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER ) BEARING CARRIER (HOUSING) LOCKNUT, BEARING COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST) BEARING FRAME BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS CASE GASKET TFE FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME) SNAP RING, BEARING SCREW BEARING HOUSING SCREW BEARING CARRIER SCREW FOOT LOCKWASHER, BEARING COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE BEARING HOUSING JACKBOLT JAMNUTS O-RING BEARING CARRIER (2) (G3 ONLY) BEARING CLAMP COMES WITH ****KEY ATTACHED***** TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST) IB AND OB BEARINGS. PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST) BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING JACK BOLT, BEARING HOUSING BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) IB AND OB BEARINGS (TIMKEN OR EQUAL) PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER ) BEARING CARRIER (HOUSING) LOCKNUT, BEARING COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST) BEARING FRAME BEARING FRAME FOOT (NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS CASE GASKET TFE FRAME TO ADAPTER ORING (NOT INCLUDED ON 6-8" DMIIIG1 AS IT IS CAST INTO FRAME) SNAP RING, BEARING SCREW BEARING HOUSING SCREW BEARING CARRIER SCREW FOOT LOCKWASHER, BEARING COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE BEARING HOUSING JACKBOLT JAMNUTS O-RING BEARING CARRIER (2) (G3 ONLY) BEARING CLAMP COMES WITH ****KEY ATTACHED***** TFE CASING GASKET (WILL COME ATTACHED TO ADAPTER)

WCB(IRON) CONSTRUCTION WITH 4140 SHAFT, 316SS SLEEVE, WCB/DI COVER, WCB/DI 150# FLANGED CASING, CD4/316SS FULL DIAMETER IMPELLER, BEARINGS, INPRO ISOLATORS, TFE CASING AND IMPELLER GASKETS, AND 3D BULLSEYE SIGHT GLASS