Bushings
Bushings mount sheaves, sprockets, pulleys and couplings securely to shafts. Tapered bushings make components easy to install and remove, and they let one hub fit a wide range of shaft sizes.
Bushing Types...
QD (quick detachable) bushings mount sheaves, sprockets and pulleys to shafts with a tapered, split design that clamps tightly and comes off easily. They allow one sheave to fit many shaft sizes and make drive maintenance much faster.
QD Bushing Features
- Tapered clamping fit – secure grip without set screws marring the shaft
- Standard series (JA, SH, SDS, SK, SF, E, F) – broad shaft size range
- Keyed bores – standard and metric sizes
- Easy removal – jacking screws free the bushing
- Steel and ductile iron – for industrial drives
Installation Tips
Match the bushing series to the sheave or sprocket hub, then select the bore and keyway for your shaft. Tighten cap screws evenly to the specified torque, without lubricating the tapered surfaces. Recheck torque after initial run-in.
Centro carries QD bushings for sheaves, sprockets and pulleys in common series and bore sizes.
Related categories: Bushings | Shaft Bushings
Shaft bushings provide a bearing surface or a mounting interface for rotating and sliding shafts. They reduce wear, adapt bore sizes and support shafts in pivots, linkages and light-duty rotating equipment.
Shaft Bushing Types
- Plain sleeve bushings – bronze, oil-impregnated and polymer designs
- Flanged bushings – locate axially and handle thrust loads
- Reducer bushings – adapt components to smaller shafts
- Self-lubricating bushings – reduce maintenance where greasing is difficult
- Taper-lock bushings – secure mounting for drive components
Choosing a Bushing
Consider shaft diameter, load, speed and the operating environment, including moisture, chemicals and temperature. Oil-impregnated bronze suits general use, while polymer bushings resist corrosion and run dry. Confirm press-fit tolerances for the housing.
Centro carries shaft bushings for machinery maintenance and power transmission applications.
Related categories: Bushings | QD Bushings
$6.00
Subject to factory lead times
$15.64
Subject to factory lead times
$15.64
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$5.87
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$13.86
Subject to factory lead times
$22.68
Subject to factory lead times
$6.00
Subject to factory lead times
$15.64
Subject to factory lead times
$15.64
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$6.00
Subject to factory lead times
$5.87
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$11.38
Subject to factory lead times
$13.86
Subject to factory lead times
$22.68
Subject to factory lead times