Motor Control - Aventics
Centro carries VFDs, soft starters, contactors, overload relays and motor control accessories from leading brands to build or repair motor control panels. Industrial motor controllers are devices that regulate...
Configured drives and control systems are pre-engineered drive packages built to your specifications. They come with enclosures, disconnects, bypasses, filters and controls, so they're ready to install with minimal field wiring.
What's Included
- VFD in enclosure – NEMA 1, 12, 4 or 4X
- Disconnects and fusing – code-compliant protection
- Bypass options – run motors if the drive is down
- Line reactors and filters – power quality
- Operator controls – HMI, switches and indicators
Why Configured Drives
A configured drive cuts engineering, panel building and installation time. Provide motor data, environment, control requirements and options to configure the package.
Centro supplies manufacturer-configured drives and control systems and can help you specify the right setup for your application.
Related categories: Motor Control | Variable Frequency Drives | Manual Starters | Line Reactors and Output Filters
$153.13
Subject to factory lead times
$12.50
Subject to factory lead times
$1,634.38
Subject to factory lead times
$1,726.56
Subject to factory lead times
$1,634.38
Subject to factory lead times
$1,634.38
Subject to factory lead times
$1,634.38
Subject to factory lead times
$1,726.56
Subject to factory lead times
$1,726.56
Subject to factory lead times
$1,726.56
Subject to factory lead times
$12.50
Subject to factory lead times
$182.81
Subject to factory lead times
$153.13
Subject to factory lead times
$12.50
Subject to factory lead times
$1,634.38
Subject to factory lead times
$1,726.56
Subject to factory lead times
$1,634.38
Subject to factory lead times
$1,634.38
Subject to factory lead times
$1,634.38
Subject to factory lead times
$1,726.56
Subject to factory lead times
$1,726.56
Subject to factory lead times
$1,726.56
Subject to factory lead times
$12.50
Subject to factory lead times
$182.81
Subject to factory lead times
- A contactor is an electrically operated switch that opens and closes the power circuit to a motor. A motor starter is a contactor combined with an overload relay — the contactor handles switching while the overload relay monitors current and trips the circuit if the motor draws excessive current for a sustained period. A contactor alone provides no overload protection; pairing it with an overload relay creates a complete motor starter. For any motor application where protection against overheating and overload is required — which is nearly all of them — a full motor starter is the correct specification, not a bare contactor.
- A variable frequency drive controls motor speed by varying the frequency and voltage supplied to the motor. This allows precise speed adjustment throughout the operating cycle rather than simply switching the motor on and off at full speed. VFDs are the right choice when the process requires variable speed — conveyors, pumps, fans, compressors — or when energy savings are a priority, since reducing fan or pump speed even modestly cuts power consumption dramatically due to the cubic relationship between speed and power. They also provide smooth acceleration, reducing mechanical stress on couplings, belts, and driven equipment at startup.
- An overload relay protects a motor from damage caused by sustained overcurrent — the kind that occurs when a motor is overloaded, stalls, or loses a phase. It monitors motor current continuously and trips the circuit if current exceeds the motor's full-load rating for longer than the relay's time-delay allows. Without overload protection, a motor running in an overloaded condition will overheat, degrading winding insulation and eventually burning out the motor. Overload relays are available in thermal and electronic versions — electronic types offer more precise protection, adjustable trip classes, and diagnostic feedback, making them the preferred choice for critical or variable-load applications.

