Pneumatic Cylinders and Actuators - Dwyer
Pneumatic cylinders and actuators are used in a variety of industrial applications. Pneumatic cylinders and actuators use compressed air to create a force in a linear or rotary motion. Pneumatic cylinders come in ...
Centro offers linear cylinders, also known as linear actuators or hydraulic/pneumatic cylinders, which are mechanical devices that convert energy into linear motion. They are widely used in various industries, including manufacturing, automation, construction, and transportation. Linear cylinders consist of a piston or plunger that moves back and forth within a cylindrical housing, generating linear force and motion. These cylinders are powered by hydraulic fluid or compressed air, which is supplied to one side of the cylinder to push the piston in one direction, while the other side vents or returns the fluid to complete the cycle. Linear cylinders come in different designs, such as single-acting (one-directional force) and double-acting (bi-directional force). They offer precise control over linear movement, allowing for precise positioning, lifting, pushing, pulling, and clamping applications. Linear cylinders are essential in various industrial processes, such as material handling, machine tooling, assembly lines, and heavy equipment operations. With their robust construction, reliable performance, and versatility, linear cylinders enable efficient and controlled linear motion in various applications.
Electric linear actuators are used to convert electrical energy into linear motion. Electric linear actuators operate by converting rotary motion from an electric motor into linear motion through a lead screw, belt, or other mechanisms. Electric linear actuators offer precise control, quiet operation, and are often preferred for applications requiring accurate positioning and force control. Browse our selection below or contact us to speak with a product expert.
$5,542.45
Subject to factory lead times
$7,327.95
Subject to factory lead times
$160.58$192.70
Subject to factory lead times
$98.17$117.80
Subject to factory lead times
$172.71$207.25
Subject to factory lead times
$278.60
Subject to factory lead times
$315.70
Subject to factory lead times
$379.10
Subject to factory lead times
$439.60
Subject to factory lead times
$511.55
Subject to factory lead times
$260.35
Subject to factory lead times
$5,542.45
Subject to factory lead times
$7,327.95
Subject to factory lead times
$160.58$192.70
Subject to factory lead times
$98.17$117.80
Subject to factory lead times
$172.71$207.25
Subject to factory lead times
$278.60
Subject to factory lead times
$315.70
Subject to factory lead times
$379.10
Subject to factory lead times
$439.60
Subject to factory lead times
$511.55
Subject to factory lead times
$260.35
Subject to factory lead times
- Pneumatic actuators are simple, lightweight, and deliver high force relative to their size. They tolerate harsh environments, require no heat management, and are inherently safe in explosive atmospheres. Their limitations are lack of precise positioning, air compressor dependency, and energy inefficiency — compressed air is one of the most expensive utilities in a plant to generate. Electric actuators offer precise, programmable positioning, easy integration with control systems, and better energy efficiency. They are better suited for variable speed, multi-position, and data-driven applications. Their drawbacks are higher upfront cost, heat generation in continuous duty, and reduced suitability for wet or hazardous environments without special enclosures. As a rule: pneumatic for simple, fast, high-force end-to-end motion; electric for precision, programmability, and variable positioning.
- Pneumatic actuators convert compressed air energy into mechanical motion. In a linear actuator, compressed air enters one side of a cylinder, pressurizing the piston face and generating a force equal to pressure multiplied by piston area. That force pushes the piston and rod along the cylinder bore. In a double-acting cylinder, air alternately pressurizes each side to drive both extension and retraction. In a single-acting cylinder, air drives one direction and a spring or gravity returns the piston. Rotary pneumatic actuators — rack-and-pinion or vane types — convert air pressure into torque to open valves or rotate components. Speed is controlled by metering the airflow in or out of the cylinder with flow control valves.
- Several designs address tight installation envelopes. Compact or short-stroke cylinders reduce overall length by shortening the body profile while maintaining full bore force. Pancake cylinders have an extremely short body-to-stroke ratio and mount flat against surfaces — ideal when stroke requirements are minimal. Rodless cylinders eliminate the extending rod entirely, keeping the total installation length equal to stroke plus body length rather than double that of a rod cylinder. Guided compact units combine a cylinder and linear guide in a single body, removing the need for a separate guide rail. Rotary actuators replace linear motion entirely where a pivot or rotation serves the same function, often fitting in far less space than an equivalent linear device.
- For heavy lifting, the actuator type depends on whether the motion is linear or rotary and whether pneumatic or hydraulic power is available. Large-bore pneumatic cylinders generate substantial force — a 4-inch bore cylinder at 100 psi produces over 1,200 lbf — and are practical for moderate heavy-duty applications. For very high forces, hydraulic cylinders are the superior choice, operating at pressures of 1,500 to 5,000 psi and generating forces that compressed air cannot match in an equivalent cylinder size. For electric heavy lifting, high-force servo electric actuators with ballscrew or roller screw drives handle loads from hundreds to tens of thousands of pounds with precise control. Regardless of type, always factor in load eccentricity, duty cycle, and mounting configuration — off-axis loading and continuous cycling degrade any actuator far faster than rated static force figures suggest.
- The primary advantage of a rodless cylinder is space efficiency — the actuator's total installed length equals the stroke plus body length, rather than the stroke plus body length plus rod extension of a conventional cylinder. This makes them ideal for long-stroke applications in confined spaces. They also inherently resist side loading because the carriage rides along the cylinder body, distributing loads more evenly than a cantilevered rod. The main disadvantages are lower maximum operating pressure compared to rod cylinders, greater sensitivity to contamination along the external slot or band that transmits force, and higher cost and complexity. The internal sealing band or magnetic coupling that transfers force through the cylinder wall is the most maintenance-sensitive component and requires a clean operating environment to achieve full service life.
- Pneumatic actuators have fewer components but depend heavily on air quality. The most common failure points are seal wear from contaminated or unlubricated air, and corrosion from moisture in the supply. A disciplined filter-regulator-lubricator maintenance program — inspecting and draining moisture separators, replacing filter elements, and maintaining lubricator oil levels — prevents the majority of pneumatic failures. Seals and cushioning pads are the primary wear items requiring periodic replacement. Electric actuators require less routine consumable maintenance but have more complex failure modes — motor windings, encoder feedback devices, drive electronics, and mechanical drivetrain components (ballscrews, gearboxes, couplings) all require attention. Ballscrew lubrication and periodic backlash checks are the most common maintenance tasks. Electric actuator failures tend to be less predictable and more expensive to repair than worn pneumatic seals, making condition monitoring and scheduled inspection more important.
- Guided linear actuators integrate a drive cylinder with a precision linear guide to handle side loads and moment loads that a plain rod cylinder cannot resist. Twin-rod guided cylinders use two parallel rods through the end caps to prevent rotation and resist transverse loading — simple, robust, and widely used for pick-and-place and pressing applications. Slide-type guided units mount the carriage on profiled rail bearings for higher load capacity and rigidity, suitable for heavier tooling and multi-axis gantry systems. Compact guided cylinders combine the guide and drive in a low-profile square body, prioritizing space efficiency over maximum load rating. Rodless guided actuators use a magnetically or mechanically coupled external carriage on a rail, offering long stroke in minimal floor space. Electric linear actuators with integrated rail guides provide all of the above with programmable positioning and force control for the most demanding precision automation tasks.