Temperature Measurement, Instrumentation and Control - Marsh Bellofram
We carry a complete selection of temperature measurement, instrumentation, and control devices to suit any industrial or commercial application. For various reasons, temperature measurement, instrumentation, and Co...
Bimetal thermometers are widely used temperature measurement devices that employ a bimetallic strip to indicate temperature changes. These thermometers consist of two metal strips, typically made of different metals with different coefficients of thermal expansion, bonded together. The metals expand or contract at different rates as the temperature changes, causing the bimetallic strip to bend. This bending motion is then translated into a rotational movement displayed on a calibrated dial to indicate the temperature. Bimetal thermometers are known for their simplicity, durability, and cost-effectiveness. They are commonly used in various industries and applications requiring reliable temperature monitoring, such as HVAC systems, automotive, food processing, and industrial processes. Bimetal thermometers offer advantages such as wide temperature ranges, resistance to shock and vibration, and ease of installation. They are available in different sizes and configurations to suit specific application requirements. With their robust construction and accurate temperature indication, bimetal thermometers provide a reliable and cost-effective temperature measurement solution in various industrial and commercial settings.
Related categories: Thermometers | Industrial Thermometers
Thermowells protect temperature sensors from pressure, flow, corrosion and abrasion. They also let you remove sensors for replacement or calibration without draining or shutting down the process.
Thermowell Types
- Threaded thermowells – common for general service
- Socket weld and weld-in – high-pressure installations
- Flanged thermowells – easy removal and corrosive service
- Sanitary thermowells – tri-clamp for food and pharma
- Tapered and stepped stems – strength and fast response
Choosing a Thermowell
Select material, insertion length, bore size and connection. For high-velocity flows, perform a wake frequency calculation to avoid stem failure.
Centro supplies thermowells for temperature sensors and thermometers.
Related categories: Temperature Measurement, Instrumentation and Control | Temperature Regulators | Temperature Transmitters | Temperature Sensors | Temperature Recording
Industrial thermometers are specialized devices used to measure temperature in various industrial applications. These thermometers are designed to withstand harsh environmental conditions and provide accurate temperature readings in industrial settings. They are constructed with durable materials, such as stainless steel or ruggedized plastic, to withstand high temperatures, pressure, and vibrations. Industrial thermometers come in various types, including bimetallic thermometers, gas-actuated thermometers, infrared thermometers, and digital thermometers. They are used in industries such as manufacturing, oil and gas, HVAC, and food processing, where precise temperature control is critical for operational efficiency and safety. Industrial thermometers offer features such as wide temperature ranges, high accuracy, and corrosion resistance. They are often equipped with protective features like IP ratings or explosion-proof enclosures to ensure safe and reliable operation in hazardous environments. With their ability to provide reliable temperature measurements, industrial thermometers are crucial in process control, quality assurance, and monitoring critical temperature parameters in various industrial applications.
Related categories: Thermometers | Bi-Metal Thermometers
$17.82
Subject to factory lead times
$38.85
Subject to factory lead times
$17.82
Subject to factory lead times
$17.82
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$17.82
Subject to factory lead times
$38.85
Subject to factory lead times
$17.82
Subject to factory lead times
$17.82
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
$110.65
Subject to factory lead times
- Industrial temperature measurement uses sensors inserted into or mounted on the process to convert thermal energy into a readable signal. The most common sensor types are thermocouples (two dissimilar metal wires joined at a tip that generate a small voltage proportional to temperature — rugged, inexpensive, and covering the widest range from cryogenic to over 3,000°F), RTDs (Resistance Temperature Detectors — a platinum element whose resistance changes predictably with temperature, offering higher accuracy and stability than thermocouples but at a higher cost and a narrower range up to ~1,200°F), and bimetal thermometers (a mechanical dial indicator using a coiled bimetallic strip — no power required, used for local visual indication). For non-contact measurement, infrared pyrometers measure emitted thermal radiation and are used where sensors cannot physically touch the target. The sensor output is typically sent through a temperature transmitter that converts it to a standard 4–20 mA signal for the PLC or DCS.
- Thermocouples and RTDs are both sensors that measure temperature, but they work differently and have distinct strengths. A thermocouple generates a millivolt signal based on the temperature difference between its measuring junction and the reference junction — it is self-powered, very rugged, responds quickly, and covers an extremely wide temperature range (some types reach 3,200°F+). However, thermocouple accuracy is typically ±1–2°C and the signal can drift over time. An RTD uses a precision platinum element whose electrical resistance increases linearly with temperature — it provides much better accuracy (±0.1–0.5°C), excellent long-term stability, and a more linear signal, but it costs more, is more fragile, requires an excitation current, and is limited to about 1,200°F. Choose a thermocouple when you need wide range, fast response, or low cost in harsh environments. Choose an RTD when accuracy and stability are the priority, especially in the –200°F to 1,000°F range.
- Thermocouple types are designated by letter (J, K, T, E, N, R, S, B) and each has a different temperature range, accuracy, and chemical compatibility. Type K (chromel-alumel) is the most widely used general-purpose thermocouple — it covers –328°F to 2,282°F and works well in oxidizing atmospheres. Type J (iron-constantan) is popular for lower-temperature applications up to about 1,400°F and is common in plastics, rubber, and older equipment, but it is not suitable for oxidizing environments above 1,000°F because the iron wire oxidizes. Type T (copper-constantan) offers excellent accuracy at low temperatures down to –328°F and is used in food, pharmaceutical, and cryogenic applications. For very high temperatures (up to 3,200°F), noble metal types R, S, and B use platinum-rhodium wires but are expensive. Select the type based on your temperature range, the atmosphere or media the thermocouple will be exposed to, the required accuracy, and compatibility with your existing instrumentation.
- A temperature transmitter is a device that converts the low-level signal from a thermocouple or RTD into a standard, noise-immune output signal — typically 4–20 mA analog or a digital protocol like HART — that can be transmitted over long cable runs to a PLC, DCS, or recorder. Without a transmitter, the raw millivolt signal from a thermocouple is very susceptible to electrical noise, especially in industrial environments with VFDs, motors, and welding equipment nearby. A transmitter amplifies and conditions the signal close to the sensor, dramatically improving signal integrity and measurement accuracy. Transmitters also provide linearization (correcting the non-linear thermocouple signal), cold-junction compensation, sensor burnout detection, and diagnostic information. You need a transmitter whenever the distance between the sensor and the control system is more than a few feet, when accuracy matters, or when you need to integrate the temperature signal into a 4–20 mA loop or digital fieldbus network.
- A temperature switch is a device that opens or closes an electrical contact when the measured temperature reaches a preset value — it provides a simple on/off signal rather than a continuous measurement. Temperature switches are used for protection and alarm functions where you need to trigger an action at a specific temperature threshold: shutting down a motor if bearing temperature exceeds a limit, activating a cooling fan when a cabinet gets too hot, triggering an alarm if a tank heater overheats, or interlocking a process to prevent operation outside safe temperature limits. Use a temperature switch when you only need to know whether temperature is above or below a set point and need a reliable, independent safety device. Use a transmitter when you need to continuously monitor the actual temperature value, trend it over time, or feed it into a control loop. In many critical applications, both are used together — a transmitter for monitoring and control, and an independent temperature switch as a safety backup.