Pumps - Mosherflo Pumps
Industrial pumps move liquids from one place to another, whether you’re handling water, chemicals, or thick, heavy fluids. Most pumps fall into one of two main categories: positive-displacement pumps and cen...
Categories from Mosherflo Pumps (2)
Centrifugal Metallic/Non-Metallic Sealed Pumps
Centrifugal pumps are the most common pumps in industry. They move large volumes of water and low-viscosity liquids efficiently. Sealed centrifugal pumps in metallic and non-metallic construction handle everything from clean water to corrosive chemicals.
Centrifugal Pump Categories
- Chemical centrifugal pumps – plastic, lined and alloy construction for corrosive fluids
- Industrial centrifugal pumps – end suction, ANSI and inline designs
- Horizontal and vertical configurations – fit space and application
Choosing a Pump
Select by flow, head, fluid properties and NPSH available. Materials and seal type must suit the chemistry. Operating near the best efficiency point extends pump life.
Centro can help size centrifugal pumps for your system.
Shop by type: Industrial Centrifugal Pumps
Related categories: Pumps | Metering Pumps | Sealless Mag-Drive Pumps
Trash Pumps
Trash pumps are robust and specialized devices designed for efficiently handling and transferring water containing solid debris, such as leaves, mud, and other waste materials. These pumps are aptly named for their ability to tackle challenging tasks involving dirty or trash-laden water, making them indispensable in various industries and applications. Commonly used in construction sites, mining operations, and flood control scenarios, trash pumps excel at moving large volumes of water swiftly and effectively, even when it's laden with solid particles. With their durable construction and powerful performance, trash pumps play a vital role in maintaining clean and efficient water management systems, contributing to the seamless operation of projects that require the removal of debris-laden water.
Related categories: Pumps | ANSI Pumps | Pump Control System Applications | Sealless Mag-Drive Pumps
Filter
Filter
942 items
content loaded
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-MTA-4X6-10G-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES THE FOLLOWING:
8" CASE GASKET (TFE)
FRAME TO ADAPTER GASKET (VELLUMOID), IMPELLER GASKET [O-RING] (TFE)
BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-1.5X3-6-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-105-TFE from Mosherflo is a G196 STA LANTERN RING. Typical applications span food processing, pulp and paper, and water treatment environments. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
Engineered by Mosherflo, the G196-STA-107-SS is a G196 STA GLAND, PACKING. It is commonly found in pulp and paper, oil and gas, and food processing applications. Mosherflo products are trusted by engineers and specifiers worldwide.
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-123-NYL from Mosherflo is a G196 STA DEFLECTOR. This product serves professionals across food processing, chemical processing, and oil and gas sectors. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-1X1.5-6-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-MTA-4X6-10G-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES THE FOLLOWING:
8" CASE GASKET (TFE)
FRAME TO ADAPTER GASKET (VELLUMOID), IMPELLER GASKET [O-RING] (TFE)
BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-1.5X3-6-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-105-TFE from Mosherflo is a G196 STA LANTERN RING. Typical applications span food processing, pulp and paper, and water treatment environments. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
Engineered by Mosherflo, the G196-STA-107-SS is a G196 STA GLAND, PACKING. It is commonly found in pulp and paper, oil and gas, and food processing applications. Mosherflo products are trusted by engineers and specifiers worldwide.
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-123-NYL from Mosherflo is a G196 STA DEFLECTOR. This product serves professionals across food processing, chemical processing, and oil and gas sectors. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-1X1.5-6-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
FAQS
- Flow (GPM) + total dynamic head (TDH), fluid details (chemistry, temp, solids/viscosity), suction conditions (NPSHa), desired materials, seal type, driver/voltage, connection sizes, and duty cycle.
- The total head the pump must overcome: static lift + discharge head + pressure requirements + friction losses in pipe/fittings/valves/filters, adjusted for fluid density.
- Centrifugal for higher flow/low–moderate viscosity and smoother operation; positive displacement for high viscosity, accurate metering, higher pressures, or when flow must stay steady as pressure changes.
- ANSI process pumps are for clean/process fluids and standard chemical-duty applications; self-priming trash pumps are built to handle air entrainment and larger solids for dewatering/wastewater.
- Match wetted materials to the fluid chemistry, temperature, and abrasiveness (e.g., 316 SS for corrosion resistance; ductile iron for general service; hardened materials/coatings for abrasion).
- Often yes on the discharge side to control flow (within limits), but avoid deadheading too long (heat buildup); never throttle suction, use a valve only for isolation.
- VFD speed control is usually most efficient; throttling works but wastes energy; bypass recirculation may be needed to maintain minimum flow.
- Use viscosity-corrected curves or consider positive displacement; expect reduced flow/increased power and ensure suction piping supports high-viscosity feeding.
- Define solids size, concentration, hardness, and shape; choose solids-handling hydraulics, slower speeds, abrasion-resistant materials, and appropriate clearances.
- Select compatible metallurgy/coatings, control pH/chemistry, reduce velocity in corrosive service, manage solids, and use wear parts designed for abrasion.
- Alignment, lubrication, seal support/flush checks, strainer cleaning, vibration/temperature monitoring, and verifying operation near BEP and above minimum flow.
- Best Efficiency Point is where the pump runs most efficiently with lowest vibration; aim to operate near BEP to improve seal/bearing life and reduce energy cost.