Commercial Filtration - Van Air Systems
Commercial filtration solutions prioritize ease of use, reliable performance, and regulatory compliance while handling moderate flow rates and contaminant loads. By removing impurities, odors, particulates, and harmful substances, commercial filtration improves health, protects equipment, and ensures a consistently pleasant environment for staff and customers.
Filter
Filter
256 items
content loaded
Cost effective solution to remove lubricating oils from condensate streams.
$1,950.04
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$19,450.39
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$9,800.20
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$12,400.25
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$14,125.29
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$23,850.48
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$7,800.16
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$6,700.14
Available for Purchase
Subject to factory lead times
The ID15-SW is what a compressed dryer should be: simple, reliable, effective and manufactured from quality heavy duty materials that will probably outlast the compressor and every other tool in your shop. The Van Air Systems Inline Desiccant Dryers can supply a -40°F pressure dew point and are ideal for pneumatic equipment or instruments that require small volumes (up to 15 SCFM at 100 psig) of extremely dry air or gas. The ID15-SW uses a convenient color changing desiccant cartridge (model SG23; one cartridge is included) to adsorb water vapor from the compressed air line. A sight window on the body of the dryer is present to view the condition of the silica gel, which turns from blue to pink when saturated with moisture, signaling that it's time to replace the cartridge. Replacing the In-line Dryer cartridge is a quick procedure. No tools are needed and there is no handling of desiccant involved. Changing the cartridge only takes minutes. No regular maintenance is required. The dryer has a range of ideal uses, from pneumatic control systems to spray painting to drying natural gas. The dryer is constructed of cast aluminum and finished with a chip resistant powder coating. Features and Benefits -40â° F pressure dew point Initial SG23 desiccant cartridge included Manual depressurization valve Low pressure drop, less than 1 PSID at rated conditions Industrial grade materials of construction Applications Point-of-use drying for intermittent flows Air/gas instruments Control gas Small flows of fuel gas Pneumatic tools Fuel gas for thermoelectric generators Paint shops Downloads Brochure Manual Drawing
$2,575.06
Available for Purchase
Subject to factory lead times
Van Air Systems In-line Desiccant Dryers supply a -40°F pressure dew point and are ideal for pneumatic equipment or instruments that require small volumes of extremely dry compressed air or gas. Van Air offers two types of desiccant cartridges. Model ID15/IND uses a disposable molecular sieve cartridge and has a moisture indicator on top of the dryer housing that indicates the condition of the material in the cartridge. Replacing the In-line Dryer cartridge is a quick procedure. No tools are needed and there is no handling of desiccant involved. Changing the cartridge only takes minutes. No regular maintenance is required. Van Air Systems In-line Dryers can be installed inside or outside in ambient temperatures up to 100°F. Only inlet and outlet connections are needed. In-line Desiccant Compressed Air Dryers perform effectively under cyclic or sporadic flow conditions. Pressure drop across the dryer is negligible. Features and Benefits Cast aluminum alloy construction (ID15) 1/2" NPT inlet/outlet (ID15) Depressurizing valve Weighs 5 pounds with desiccant (ID15) Applications Point-of-use drying for intermittent flows Air/gas instruments Pneumatic tools Fuel gas for thermoelectric generators Paint shops
$610.02
Available for Purchase
Subject to factory lead times
The ID15-SW is what a compressed dryer should be: simple, reliable, effective and manufactured from quality heavy duty materials that will probably outlast the compressor and every other tool in your shop. The Van Air Systems Inline Desiccant Dryers can supply a -40°F pressure dew point and are ideal for pneumatic equipment or instruments that require small volumes (up to 15 SCFM at 100 psig) of extremely dry air or gas. The ID15-SW uses a convenient color changing desiccant cartridge (model SG23; one cartridge is included) to adsorb water vapor from the compressed air line. A sight window on the body of the dryer is present to view the condition of the silica gel, which turns from blue to pink when saturated with moisture, signaling that it's time to replace the cartridge. Replacing the In-line Dryer cartridge is a quick procedure. No tools are needed and there is no handling of desiccant involved. Changing the cartridge only takes minutes. No regular maintenance is required. The dryer has a range of ideal uses, from pneumatic control systems to spray painting to drying natural gas. The dryer is constructed of cast aluminum and finished with a chip resistant powder coating. Features and Benefits -40â° F pressure dew point Initial SG23 desiccant cartridge included Manual depressurization valve Low pressure drop, less than 1 PSID at rated conditions Industrial grade materials of construction Applications Point-of-use drying for intermittent flows Air/gas instruments Control gas Small flows of fuel gas Pneumatic tools Fuel gas for thermoelectric generators Paint shops Downloads Brochure Manual Drawing
$550.02
Available for Purchase
Subject to factory lead times
Van Air Systems new moisture separators remove compressor lubricant, oil aerosols, and moisture from compressed air systems. These separators have flows up to 1600 SCFM. Their rugged cast aluminum housings are durable and come with a lifetime warranty.
$575.02
Available for Purchase
Subject to factory lead times
Van Air Systems new moisture separators remove compressor lubricant, oil aerosols, and moisture from compressed air systems. These separators have flows up to 1600 SCFM. Their rugged cast aluminum housings are durable and come with a lifetime warranty.
$515.02
Available for Purchase
Subject to factory lead times
Van Air Systems new moisture separators remove compressor lubricant, oil aerosols, and moisture from compressed air systems. These separators have flows up to 1600 SCFM. Their rugged cast aluminum housings are durable and come with a lifetime warranty.
$615.02
Available for Purchase
Subject to factory lead times
Silica gel is a spherical bread consisting of 97% silica and 3% alumina with a highly porous surface and a strong affinity for adsorbing water. Silica gel is also applied as a selective adsorbent for a wide-range of hydrocarbons, C02, siloxanes, sulfur, and many other compounds. Because silica gel fractures in the presence of liquid water, it is often protected with a pre-bed of activated alumina. In air and gas drying applications, dew points of -40°F and lower can be achieved with silica gel. Features and Benefits High moisture retention capacity under dynamic conditions, allowing heated desiccant dryers with a higher design capacity and lower regeneration temperature A uniform bead shape provides for a lower pressure drop and less abrasion than granular types of silica gel. Available in two types, non-indicating and indicating. Indicating silica gel is impregnated with a moisture indicator that changes color from blue to pink when saturated. High static adsorption (moisture retention) under certain relative humidity conditions Available in indicating (blue to pink) and non-indicating Available in 25lb pails, 50lb bags and 330lb steel drums Downloads Brochure Safety Data Sheet (SDS)
$65.00
Available for Purchase
Subject to factory lead times
The D2 is a simple and effective point-of-use compressed air dryer, ideal for small shops and DIY enthusiasts. Attach air lines to the dryer’s half inch female ports, installing it just before your filter-regulator. Add Dry-O-Lite desiccant and start delivering clean dry air to your paint gun, blast cabinet, plasma cutter, or air tool. Open the D2’s ball valve periodically to drain liquid. When shopping for an air dryer, look closely at the cost of replacement filters and media, not just the initial price. Too many competing small dryers saddle you with a razor-razorblade model. Great initial price. Highway robbery thereafter. With the D2 it’s a different story. Cheaper initial-price dryers are out there. But as they say, don’t be penny wise and pound foolish. No small dryer will cost you less to own and operate than the D2. Features Includes (2) 1.25 lb. pouches of DRY-O-LITE (each pouch is sufficient to completely fill the D2 dryer once) Manual drain valve Sight window for checking desiccant level Epoxy interior coating PVC bed support grid Applications Paint guns Blast cabinets Air tools Actuators Downloads Brochure Manual
$550.02
Available for Purchase
Subject to factory lead times
Cost effective solution to remove lubricating oils from condensate streams.
$1,950.04
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$19,450.39
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$9,800.20
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$12,400.25
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$14,125.29
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$23,850.48
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$7,800.16
Available for Purchase
Subject to factory lead times
The Pipeline deliquescent dryer was designed to be an economical and effective solution for natural gas dehydration. Standard single-tower pipeline dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG and flow capacities up to 15.2 MMSCFD.
$6,700.14
Available for Purchase
Subject to factory lead times
The ID15-SW is what a compressed dryer should be: simple, reliable, effective and manufactured from quality heavy duty materials that will probably outlast the compressor and every other tool in your shop. The Van Air Systems Inline Desiccant Dryers can supply a -40°F pressure dew point and are ideal for pneumatic equipment or instruments that require small volumes (up to 15 SCFM at 100 psig) of extremely dry air or gas. The ID15-SW uses a convenient color changing desiccant cartridge (model SG23; one cartridge is included) to adsorb water vapor from the compressed air line. A sight window on the body of the dryer is present to view the condition of the silica gel, which turns from blue to pink when saturated with moisture, signaling that it's time to replace the cartridge. Replacing the In-line Dryer cartridge is a quick procedure. No tools are needed and there is no handling of desiccant involved. Changing the cartridge only takes minutes. No regular maintenance is required. The dryer has a range of ideal uses, from pneumatic control systems to spray painting to drying natural gas. The dryer is constructed of cast aluminum and finished with a chip resistant powder coating. Features and Benefits -40â° F pressure dew point Initial SG23 desiccant cartridge included Manual depressurization valve Low pressure drop, less than 1 PSID at rated conditions Industrial grade materials of construction Applications Point-of-use drying for intermittent flows Air/gas instruments Control gas Small flows of fuel gas Pneumatic tools Fuel gas for thermoelectric generators Paint shops Downloads Brochure Manual Drawing
$2,575.06
Available for Purchase
Subject to factory lead times
Van Air Systems In-line Desiccant Dryers supply a -40°F pressure dew point and are ideal for pneumatic equipment or instruments that require small volumes of extremely dry compressed air or gas. Van Air offers two types of desiccant cartridges. Model ID15/IND uses a disposable molecular sieve cartridge and has a moisture indicator on top of the dryer housing that indicates the condition of the material in the cartridge. Replacing the In-line Dryer cartridge is a quick procedure. No tools are needed and there is no handling of desiccant involved. Changing the cartridge only takes minutes. No regular maintenance is required. Van Air Systems In-line Dryers can be installed inside or outside in ambient temperatures up to 100°F. Only inlet and outlet connections are needed. In-line Desiccant Compressed Air Dryers perform effectively under cyclic or sporadic flow conditions. Pressure drop across the dryer is negligible. Features and Benefits Cast aluminum alloy construction (ID15) 1/2" NPT inlet/outlet (ID15) Depressurizing valve Weighs 5 pounds with desiccant (ID15) Applications Point-of-use drying for intermittent flows Air/gas instruments Pneumatic tools Fuel gas for thermoelectric generators Paint shops
$610.02
Available for Purchase
Subject to factory lead times
The ID15-SW is what a compressed dryer should be: simple, reliable, effective and manufactured from quality heavy duty materials that will probably outlast the compressor and every other tool in your shop. The Van Air Systems Inline Desiccant Dryers can supply a -40°F pressure dew point and are ideal for pneumatic equipment or instruments that require small volumes (up to 15 SCFM at 100 psig) of extremely dry air or gas. The ID15-SW uses a convenient color changing desiccant cartridge (model SG23; one cartridge is included) to adsorb water vapor from the compressed air line. A sight window on the body of the dryer is present to view the condition of the silica gel, which turns from blue to pink when saturated with moisture, signaling that it's time to replace the cartridge. Replacing the In-line Dryer cartridge is a quick procedure. No tools are needed and there is no handling of desiccant involved. Changing the cartridge only takes minutes. No regular maintenance is required. The dryer has a range of ideal uses, from pneumatic control systems to spray painting to drying natural gas. The dryer is constructed of cast aluminum and finished with a chip resistant powder coating. Features and Benefits -40â° F pressure dew point Initial SG23 desiccant cartridge included Manual depressurization valve Low pressure drop, less than 1 PSID at rated conditions Industrial grade materials of construction Applications Point-of-use drying for intermittent flows Air/gas instruments Control gas Small flows of fuel gas Pneumatic tools Fuel gas for thermoelectric generators Paint shops Downloads Brochure Manual Drawing
$550.02
Available for Purchase
Subject to factory lead times
Van Air Systems new moisture separators remove compressor lubricant, oil aerosols, and moisture from compressed air systems. These separators have flows up to 1600 SCFM. Their rugged cast aluminum housings are durable and come with a lifetime warranty.
$575.02
Available for Purchase
Subject to factory lead times
Van Air Systems new moisture separators remove compressor lubricant, oil aerosols, and moisture from compressed air systems. These separators have flows up to 1600 SCFM. Their rugged cast aluminum housings are durable and come with a lifetime warranty.
$515.02
Available for Purchase
Subject to factory lead times
Van Air Systems new moisture separators remove compressor lubricant, oil aerosols, and moisture from compressed air systems. These separators have flows up to 1600 SCFM. Their rugged cast aluminum housings are durable and come with a lifetime warranty.
$615.02
Available for Purchase
Subject to factory lead times
Silica gel is a spherical bread consisting of 97% silica and 3% alumina with a highly porous surface and a strong affinity for adsorbing water. Silica gel is also applied as a selective adsorbent for a wide-range of hydrocarbons, C02, siloxanes, sulfur, and many other compounds. Because silica gel fractures in the presence of liquid water, it is often protected with a pre-bed of activated alumina. In air and gas drying applications, dew points of -40°F and lower can be achieved with silica gel. Features and Benefits High moisture retention capacity under dynamic conditions, allowing heated desiccant dryers with a higher design capacity and lower regeneration temperature A uniform bead shape provides for a lower pressure drop and less abrasion than granular types of silica gel. Available in two types, non-indicating and indicating. Indicating silica gel is impregnated with a moisture indicator that changes color from blue to pink when saturated. High static adsorption (moisture retention) under certain relative humidity conditions Available in indicating (blue to pink) and non-indicating Available in 25lb pails, 50lb bags and 330lb steel drums Downloads Brochure Safety Data Sheet (SDS)
$65.00
Available for Purchase
Subject to factory lead times
The D2 is a simple and effective point-of-use compressed air dryer, ideal for small shops and DIY enthusiasts. Attach air lines to the dryer’s half inch female ports, installing it just before your filter-regulator. Add Dry-O-Lite desiccant and start delivering clean dry air to your paint gun, blast cabinet, plasma cutter, or air tool. Open the D2’s ball valve periodically to drain liquid. When shopping for an air dryer, look closely at the cost of replacement filters and media, not just the initial price. Too many competing small dryers saddle you with a razor-razorblade model. Great initial price. Highway robbery thereafter. With the D2 it’s a different story. Cheaper initial-price dryers are out there. But as they say, don’t be penny wise and pound foolish. No small dryer will cost you less to own and operate than the D2. Features Includes (2) 1.25 lb. pouches of DRY-O-LITE (each pouch is sufficient to completely fill the D2 dryer once) Manual drain valve Sight window for checking desiccant level Epoxy interior coating PVC bed support grid Applications Paint guns Blast cabinets Air tools Actuators Downloads Brochure Manual
$550.02
Available for Purchase
Subject to factory lead times
FAQS
- Commercial filtration refers to air and water filtration systems designed for commercial buildings, offices, retail spaces, restaurants, hotels, hospitals, schools, and other non-manufacturing environments. While industrial filtration focuses on protecting process equipment, meeting product quality specifications, and handling heavy contaminant loads in manufacturing settings, commercial filtration prioritizes occupant health and comfort, regulatory compliance, ease of maintenance, and system reliability at moderate flow rates and contaminant levels. Common commercial filtration applications include HVAC air filtration (removing airborne particles, allergens, and pathogens from building ventilation systems), point-of-use water filtration (improving taste, removing sediment, and reducing chlorine and contaminants in drinking water), and kitchen exhaust filtration (capturing grease and cooking fumes). Commercial filtration solutions tend to be simpler to install and maintain than industrial systems, with filter elements designed for easy replacement by building maintenance staff rather than specialized technicians.
- MERV (Minimum Efficiency Reporting Value) rates air filter efficiency on a scale from 1 to 20, with higher numbers indicating finer filtration. The right MERV rating depends on the building type, occupant sensitivity, and HVAC system capability. MERV 8 is the minimum recommended for commercial buildings — it captures pollen, dust mites, mold spores, and particles down to approximately 3 microns, and is the standard for general office buildings, retail spaces, and warehouses. MERV 11–13 provides noticeably better indoor air quality by capturing finer particles including lead dust, auto emissions, and legionella bacteria, and is recommended for healthcare outpatient facilities, commercial kitchens, schools, and buildings where occupants have respiratory sensitivities. MERV 14–16 is specified for hospitals, surgical suites, clean manufacturing areas, and environments requiring superior particulate control. Before upgrading to a higher MERV rating, verify that the HVAC system's fan can handle the increased pressure drop — higher-rated filters are denser and more restrictive, which can reduce airflow and strain the fan motor if the system was not designed for it.
- Commercial water filtration removes sediment, chlorine, chloramine, dissolved chemicals, heavy metals, and in some cases microorganisms from the building's water supply to improve taste, odor, clarity, and safety for drinking, cooking, and equipment use. Sediment filters (typically 5–25 microns) remove sand, silt, rust, and scale particles that cloud the water and can damage plumbing fixtures, ice machines, and coffee and beverage equipment. Activated carbon filters adsorb chlorine, chloramine, volatile organic compounds (VOCs), and taste and odor compounds — this is the most common filtration for improving the taste of municipal water in restaurants, hotels, and office break rooms. For foodservice establishments, dedicated water filtration systems protect ice machines, espresso machines, steamers, and combi ovens from scale buildup and premature failure caused by hard water and sediment. In healthcare and laboratory settings, more advanced filtration (including reverse osmosis and UV disinfection) may be required to meet specific water quality standards. Proper water filtration extends equipment life, reduces maintenance costs, and improves the quality of food and beverages served to customers.
- HVAC filter replacement frequency depends on the filter type, the building's environment, and the level of airborne contaminants. Standard 1-inch pleated filters should typically be inspected monthly and replaced every 1 to 3 months. Higher-capacity 4-inch or extended-surface filters can last 6 to 12 months before replacement. These are general guidelines — actual replacement timing should be based on the differential pressure across the filter bank, measured with a manometer or differential pressure gauge installed across the filter section of the air handling unit. When the measured pressure drop reaches the filter manufacturer's recommended maximum final resistance, the filters should be changed regardless of time in service. Environmental factors that shorten filter life include construction activity near the building, high outdoor pollen counts, proximity to roadways or industrial emissions, high occupancy levels, and pets in the space. Running filters past their recommended differential pressure wastes fan energy, reduces airflow (causing hot and cold complaints), and can allow contaminant bypass around overloaded filter frames — defeating the purpose of the filtration.
- Improving indoor air quality (IAQ) requires a layered filtration approach matched to the building type and occupant requirements. For general offices, upgrading from a basic MERV 8 filter to MERV 11 or 13 captures a significantly higher percentage of fine particulates including allergens, bacteria, and emissions particles — this single upgrade often produces noticeable IAQ improvement at modest cost. For healthcare facilities, ASHRAE Standard 170 specifies minimum filtration levels by area: general patient rooms require MERV 14, operating rooms and protective environment rooms require MERV 14 pre-filtration plus HEPA (MERV 17 or higher) final filtration. For buildings in areas with poor outdoor air quality, adding activated carbon or gas-phase filtration to the air handling system reduces VOCs, ozone, and odors that particulate filters alone cannot remove. Supplemental in-room portable air purifiers with HEPA and carbon filtration can address localized IAQ concerns. Beyond filtration, adequate outdoor air ventilation (per ASHRAE Standard 62.1), proper humidity control (30–60% RH), and regular HVAC maintenance are all essential components of a comprehensive IAQ strategy. The COVID-19 pandemic has significantly increased awareness and demand for enhanced filtration in commercial buildings.