Electrical

Nelson AX END SEAL W LIGHT WITH 12 IN STRAP HEL1

Nelson CABLE FLUO 3W 120V

Nelson EHT WARNING SIGN WEATHERPROOF WS100 Elec

Nelson Glass Tape 1/2 I N X 60 FT GT6 Fiberglass

Aluminum Foil Tape;2 Inches x 150 Feet

Nelson AX Power Conn Kit;WITH 12in STRAP

Nelson SPLICE CONN KIT A;X W 12 IN STRAP AXSC100

Nelson CONTROLLER 1 POIN;T C1D2 NEMA 4X CM2201 Cl

Nelson Glass Tape 1/2 I;N X 180 FT GT60 Fibergla

Nelson C1D1 END CONN KIT;CLASS 1 DIV 1 HASKE Clas

Nelson C1D1 POWER CONN K;IT CLASS 1 DIV 1 HASKP C

The Nelson HASKS heat trace splice kit is the inline splice variant of the HASK Series connection kits, approved for use in Class I, Division 1 hazardous locations when used with Nelson LT, HLT, and XLT Series field-fabricated heating cables. It is purpose-built for joining two heat trace cables in a straight, in-line splice configuration — whether you're extending a cable run, bridging across removable equipment, or connecting cables of different wattages within the same circuit. The kit includes an approved explosion-proof junction box, seal fittings with reducers, sealing compound and packing fiber, cable entry seals with grommets, power terminations with adhesive sealant, and a 3-point floating terminal block. The HASK Series carries Factory Mutual and Canadian Standards Association approval for C1D1 installations, making it a code-compliant solution for refineries, chemical plants, petrochemical facilities, and other hazardous process environments where flammable gases or vapors may be present under normal operating conditions. Hazardous area classifications covered include Class I, Division 1, Groups B, C and D; Class II, Division 1, Groups E, F and G; Class III; and Class I, Zone 1, IIB.