What is a swivel joint and where is it used?

A swivel joint is a rotating pipe fitting that allows two connected sections of pipe or hose to rotate relative to each other while maintaining a sealed, leak-free fluid path. Swivel joints are used wherever rigid pipe connections would be overstressed by movement, vibration, thermal expansion, or the need for rotational flexibility — common applications include loading arms at tank truck and railcar loading/unloading stations, rotating equipment connections (drum dryers, rotary kilns, rotary unions), fire protection systems (fire monitor nozzles that need to swivel), offshore drilling and production rigs, and process piping that undergoes significant thermal expansion. Without a swivel joint, rigid pipe connections subjected to movement develop stress cracks, flange leaks, and fatigue failures over time.

How does a swivel joint differ from a union or flexible connector?

A union is a static pipe fitting that allows two pipes to be disconnected and reconnected for maintenance — it does not allow rotation during operation. A flexible connector (flex hose, expansion joint, or braided hose) absorbs vibration and movement through deflection of a flexible element, but it does not provide continuous 360° rotation. A swivel joint is specifically designed for continuous rotational movement under full system pressure — it uses precision bearings and dynamic seals to allow the connected piping to rotate freely while maintaining a sealed fluid path. Use a union where you need a disconnect point for maintenance. Use a flexible connector where you need to absorb vibration, misalignment, or thermal expansion in a linear direction. Use a swivel joint where the connection must rotate continuously or repeatedly during normal operation.

What materials and pressure ratings are available for swivel joints?

Swivel joints are available in a range of materials to match the fluid, temperature, and corrosion requirements of the application. Carbon steel is the standard for general-purpose applications like petroleum products, water, and air. Stainless steel (304 and 316) is used for corrosive chemicals, food-grade applications, and high-temperature service. Specialty alloys (Monel, Hastelloy, Inconel) are available for extremely corrosive or high-temperature environments. Pressure ratings vary by size and design — standard industrial swivel joints are commonly rated from 150 psi to 3,000 psi, with high-pressure designs available up to 10,000+ psi for hydraulic and offshore applications. Temperature ratings range from cryogenic service to over 1,000°F depending on the seal material and body alloy. The seal is the critical wear component — materials include Buna-N, Viton, PTFE, and Kalrez, selected based on chemical compatibility and temperature range.

How do I size a swivel joint for my piping system?

Swivel joint sizing starts with matching the joint's pipe connection size to the existing piping — common sizes range from 1/2" to 12" NPT or flanged connections. Beyond the physical connection size, verify that the swivel joint's pressure rating meets or exceeds the maximum system pressure including any surge or water hammer events, the temperature rating accommodates the full operating range of the fluid, the seal material is compatible with the fluid being handled, and the bearing design supports the expected rotational speed and loading. For loading arm applications, calculate the torque that gravity and fluid weight will exert on the swivel and ensure the joint's bearing capacity can handle it. For high-cycle applications (rotating equipment), specify a joint designed for continuous rotation with appropriate bearing lubrication provisions. Always provide the fluid type, pressure, temperature, pipe size, and rotation requirements to the manufacturer for proper selection.

How often do swivel joints need maintenance and what wears out?

The primary wear item in a swivel joint is the seal — the dynamic sealing element that prevents leakage while allowing rotation. Seal life depends on the fluid, temperature, pressure, rotational frequency, and seal material, but typical service intervals range from 1–5 years for active-rotation applications. Signs that maintenance is needed include visible dripping or weeping at the swivel, increased rotational resistance (stiffness), or unusual noise during rotation. Maintenance typically involves disassembling the joint, inspecting and replacing the seals, inspecting the bearing surfaces for wear or scoring, replacing bearings if worn, and reassembling with proper lubrication. Preventive maintenance — periodic lubrication of the bearing (where applicable), monitoring for leaks during routine inspections, and replacing seals on a schedule before failure — significantly extends the life of the joint and prevents unplanned downtime. Keeping a spare seal kit on hand for each swivel joint size in your facility is a best practice.

Swivel Joints

Swivel joints are crucial components used to connect pipes or hoses in a fluid system, allowing for rotation and movement in various directions. These versatile joints are commonly employed in industries like oil and gas, chemical processing, and firefighting, where flexible connections are essential to accommodate movement, vibration, and thermal expansion. Swivel joints provide a reliable solution for preventing hose or pipe kinks, reducing stress on equipment, and enabling smooth fluid transfer even in challenging environments. With different sizes, materials, and pressure ratings available, swivel joints offer the flexibility needed to meet specific application requirements and ensure efficient fluid handling.

Filter

In Stock Only

Filter

2,669 items

Sort by:

content loaded

Compare

Swivel Joints

$1,229.68

$1,122.15

$1,187.10

$1,262.69

$1,413.87

$1,220.11

$1,620.42

$1,730.07

$2,402.94

$2,176.17

$2,284.77

$2,176.17

$1,400.03

$1,476.69

$1,626.80

$1,898.29

$2,011.14

$2,053.73

$2,225.14

$2,165.52

$2,165.52

$2,763.86

$2,365.68

$2,090.99

$1,229.68

$1,122.15

$1,187.10

$1,262.69

$1,413.87

$1,220.11

$1,620.42

$1,730.07

$2,402.94

$2,176.17

$2,284.77

$2,176.17

$1,400.03

$1,476.69

$1,626.80

$1,898.29

$2,011.14

$2,053.73

$2,225.14

$2,165.52

$2,165.52

$2,763.86

$2,365.68

$2,090.99

Orders & purchases

Divisions