Temperature Accessories
Temperature accessories for industrial instrumentation are specialized components that support accurate and reliable temperature measurement and control in process systems.
Filter
Filter
1,943 items
content loaded
The Dwyer - HGMP-KI-M is a Miniature Thermocouple Connector featuring High Temp, 2 Pins, Male, K Type, IEC, and Low Noise. It is rated for a temperature range of -29 °C to 260 °C (-20 °F to 500 °F). Part of the HGMP Series. Sold individually.
$9.98$10.82
Should ship between 06 Jan and 13 Jan
Subject to factory lead times
The Dwyer - KHSS-18U-RSC-6 is an Utility Handle Thermocouple Probe featuring Retractable, K Type, 0.125 " x 6 " Probe, 60 " Cable, 28 AWG, TPE, Ungrounded, Immersion, 304 SS, Mini Male CONN, and ANSI. It is rated for a temperature range of 0 °C to 900 °C. Part of the KHSS Series. Sold individually.
$102.16$110.80
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - KHSS-316G-RSC-24 is an Utility Handle Thermocouple Probe featuring Retractable, K Type, 0.187 " x 24 " Probe, 60 " Cable, 28 AWG, TPE, Grounded, Immersion, 304 SS, Mini Male CONN, and ANSI. It is rated for a temperature range of 0 °C to 1150 °C. Part of the KHSS Series. Sold individually.
$98.04$106.33
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - OSTW-TI-F is a Standard Thermocouple Connector featuring Round Pin, 2 Pins, Female, T Type, IEC, and with Write-on Window. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the OSTW Series. Sold individually.
$9.16$9.93
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - PCC-SMP-V-T-100 is a Circuit Board Thermocouple Connector featuring Miniature, 2 Pins, Female, T Type, and Vertical Mounting. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the PCC-OST-SMP Series. Sold as a pack of 100.
$493.97$535.78
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - PFT2NPT-1CU is a Vacuum/Pressure Feedthrough for Sealing Wire & Cable featuring 1/2 " NPT Plug, Brass, Copper, and 1 Pairs. Part of the PFT2 Series. Sold individually.
$192.60
Should ship between 02 Dec and 16 Dec
Subject to factory lead times
The Dwyer - PTRA-31614-12 is a Thermocouple Protection Tube featuring OMEGATITE, Ceramic, Alumina(99.8 %), Closed Sensing End, 12 " L, 0.25 " OD, and 0.187 ". It is rated for a temperature range of 1950 °C (3540 °F). Part of the PTRA 450 Series. Sold individually.
$51.80
Should ship between 13 Jan and 20 Jan
Subject to factory lead times
The Dwyer - SMP-K-F-NL is a Miniature Thermocouple Connector featuring Flat Pin, 2 Pins, Female, K Type, ANSI, and No Logo. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the SMP Series. Sold individually.
$6.73$7.29
Should ship between 03 Feb and 10 Feb
Subject to factory lead times
The Dwyer - 88L40K is a Thermocouple Handle Probe featuring Thin Leaf Surface, K Type, 60 " Cable, TPE, Flat Leaf Design, Miniature CONN, ANSI, and Element Dimension 3 ". It is rated for a temperature range of 0 °C to 300 °C. Sold individually.
$185.03$200.69
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - HSTW-J-MQ is a Standard Thermocouple Connector featuring Round Pin, 2 Pins, Male, J Type, ANSI, and with Write-on Window & Quick Cap. It is rated for a temperature range of -29 °C to 260 °C (-20 °F to 500 °F). Part of the HSTW Series. Sold individually.
$9.72$10.54
Should ship between 17 Feb and 24 Feb
Subject to factory lead times
The Dwyer - MTC-24-DUST COVER BACK is a Multi-Pin Thermocouple Cable Connector featuring Dust Cover and Back. It is rated for a temperature range of -55 °C to 200 °C (-67 °F to 392 °F). Part of the MTC Series. Sold individually.
$1.98
Should ship between 15 Mar and 25 Mar
Subject to factory lead times
The Dwyer - MTC-55-FF is a Multi-Pin Thermocouple Cable Connector featuring 55 Pins, Female, and Flanged Connector. It is rated for a temperature range of -55 °C to 200 °C (-67 °F to 392 °F). Part of the MTC Series. Sold individually.
$139.66
Should ship between 03 Feb and 10 Feb
Subject to factory lead times
The Dwyer - MTC-55-SHL is a Multi-Pin Thermocouple Cable Connector featuring 55 Pins. It is rated for a temperature range of -55 °C to 200 °C (-67 °F to 392 °F). Part of the MTC Series. Sold individually.
$222.70
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - OSTW-KI-M-NL is a Standard Thermocouple Connector featuring Round Pin, 2 Pins, Male, K Type, IEC, with Write-on Window, and No Logo. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the OSTW Series. Sold individually.
$5.73$6.21
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - PFTFS-8T is a Vacuum/Pressure Feedthrough featuring Hermetic Face Seal and T Thermocouple. Part of the 300 Series SS Nitrile O-ring and PFTFS-8 Series. Sold individually.
$1,220.95
Should ship between 09 Dec and 16 Dec
Subject to factory lead times
The Dwyer - SH-1-24-100 is a Ceramic Bead Insulator featuring Single Hole Round, Mullite, 24 AWG, 1 " L, and 1/16 " OD. Part of the SH Series. Sold as a pack of 100.
$98.88$107.24
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - SMP-HT-K-6 is a Surface Thermocouple Probe featuring Quick Connect, K Type, 6 " Probe, Ceramic Tip, 304 SS, Miniature CONN, and ANSI. It is rated for a temperature range of 0 °C to 200 °C. Part of the SMP-HT Series. Sold individually.
$123.97$134.46
Should ship between 18 Nov and 25 Nov
Subject to factory lead times
The Dwyer - SMPW-CC-K-F-100 is a Miniature Thermocouple Connector featuring Flat Pin, 2 Pins, Female, K Type, ANSI, and 100 Pack. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the SMPW-CC Series. Sold as a pack of 100.
$547.30$593.62
Should ship between 17 Feb and 24 Feb
Subject to factory lead times
The Dwyer - TA4M is a Cord Plug for RTD & Thermistor featuring Male Connector, 4 Pins, and 2.9 mm Dia. Part of the T Series. Sold individually.
$18.41
Should ship between 06 Jan and 13 Jan
Subject to factory lead times
The Dwyer - FS-125-20-1000 is a Ceramic Bead Insulator featuring Hole Fish Spine, Steatite, 20 AWG, 0.13 " L, and 0.13 " OD. Part of the FS Series. Sold as a pack of 1000.
$95.43$103.50
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - NB16W-4 is a Thermocouple Head featuring 1/2 " NPT Tube Entry, 1/2 " NPT Process Entry, 4 Terminals (CH-74/M12), and Polypropylene. Part of the NB Series. Sold individually.
$70.86$76.85
Should ship between 10 Mar and 17 Mar
Subject to factory lead times
The Dwyer - NHX-T-M is a Standard Thermocouple Connector featuring Ceramic, Ultra High Temp, 2 Pins, Male, T Type, ANSI, and Solid Pins. It is rated for a temperature range of -29 °C to 399 °C (-20 °F to 750 °F). Part of the NHX Series. Sold individually.
$25.29$27.43
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - SSLK-516-14 is a Compression Fitting featuring 1/4 " NPT Male, 316 SS, RoHS Compliant, 39.1 mm L, and Heavy Duty Construction. Part of the OMEGALOK Series. Sold individually.
$41.20
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - 88L75K is a Thermocouple Handle Probe featuring Thin Leaf Surface, K Type, 60 " Cable, TPE, Flat Leaf Design, Miniature CONN, ANSI, and Element Dimension 1.5 ". It is rated for a temperature range of 0 °C to 300 °C. Sold individually.
$265.99$288.50
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - HGMP-KI-M is a Miniature Thermocouple Connector featuring High Temp, 2 Pins, Male, K Type, IEC, and Low Noise. It is rated for a temperature range of -29 °C to 260 °C (-20 °F to 500 °F). Part of the HGMP Series. Sold individually.
$9.98$10.82
Should ship between 06 Jan and 13 Jan
Subject to factory lead times
The Dwyer - KHSS-18U-RSC-6 is an Utility Handle Thermocouple Probe featuring Retractable, K Type, 0.125 " x 6 " Probe, 60 " Cable, 28 AWG, TPE, Ungrounded, Immersion, 304 SS, Mini Male CONN, and ANSI. It is rated for a temperature range of 0 °C to 900 °C. Part of the KHSS Series. Sold individually.
$102.16$110.80
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - KHSS-316G-RSC-24 is an Utility Handle Thermocouple Probe featuring Retractable, K Type, 0.187 " x 24 " Probe, 60 " Cable, 28 AWG, TPE, Grounded, Immersion, 304 SS, Mini Male CONN, and ANSI. It is rated for a temperature range of 0 °C to 1150 °C. Part of the KHSS Series. Sold individually.
$98.04$106.33
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - OSTW-TI-F is a Standard Thermocouple Connector featuring Round Pin, 2 Pins, Female, T Type, IEC, and with Write-on Window. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the OSTW Series. Sold individually.
$9.16$9.93
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - PCC-SMP-V-T-100 is a Circuit Board Thermocouple Connector featuring Miniature, 2 Pins, Female, T Type, and Vertical Mounting. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the PCC-OST-SMP Series. Sold as a pack of 100.
$493.97$535.78
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - PFT2NPT-1CU is a Vacuum/Pressure Feedthrough for Sealing Wire & Cable featuring 1/2 " NPT Plug, Brass, Copper, and 1 Pairs. Part of the PFT2 Series. Sold individually.
$192.60
Should ship between 02 Dec and 16 Dec
Subject to factory lead times
The Dwyer - PTRA-31614-12 is a Thermocouple Protection Tube featuring OMEGATITE, Ceramic, Alumina(99.8 %), Closed Sensing End, 12 " L, 0.25 " OD, and 0.187 ". It is rated for a temperature range of 1950 °C (3540 °F). Part of the PTRA 450 Series. Sold individually.
$51.80
Should ship between 13 Jan and 20 Jan
Subject to factory lead times
The Dwyer - SMP-K-F-NL is a Miniature Thermocouple Connector featuring Flat Pin, 2 Pins, Female, K Type, ANSI, and No Logo. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the SMP Series. Sold individually.
$6.73$7.29
Should ship between 03 Feb and 10 Feb
Subject to factory lead times
The Dwyer - 88L40K is a Thermocouple Handle Probe featuring Thin Leaf Surface, K Type, 60 " Cable, TPE, Flat Leaf Design, Miniature CONN, ANSI, and Element Dimension 3 ". It is rated for a temperature range of 0 °C to 300 °C. Sold individually.
$185.03$200.69
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - HSTW-J-MQ is a Standard Thermocouple Connector featuring Round Pin, 2 Pins, Male, J Type, ANSI, and with Write-on Window & Quick Cap. It is rated for a temperature range of -29 °C to 260 °C (-20 °F to 500 °F). Part of the HSTW Series. Sold individually.
$9.72$10.54
Should ship between 17 Feb and 24 Feb
Subject to factory lead times
The Dwyer - MTC-24-DUST COVER BACK is a Multi-Pin Thermocouple Cable Connector featuring Dust Cover and Back. It is rated for a temperature range of -55 °C to 200 °C (-67 °F to 392 °F). Part of the MTC Series. Sold individually.
$1.98
Should ship between 15 Mar and 25 Mar
Subject to factory lead times
The Dwyer - MTC-55-FF is a Multi-Pin Thermocouple Cable Connector featuring 55 Pins, Female, and Flanged Connector. It is rated for a temperature range of -55 °C to 200 °C (-67 °F to 392 °F). Part of the MTC Series. Sold individually.
$139.66
Should ship between 03 Feb and 10 Feb
Subject to factory lead times
The Dwyer - MTC-55-SHL is a Multi-Pin Thermocouple Cable Connector featuring 55 Pins. It is rated for a temperature range of -55 °C to 200 °C (-67 °F to 392 °F). Part of the MTC Series. Sold individually.
$222.70
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - OSTW-KI-M-NL is a Standard Thermocouple Connector featuring Round Pin, 2 Pins, Male, K Type, IEC, with Write-on Window, and No Logo. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the OSTW Series. Sold individually.
$5.73$6.21
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - PFTFS-8T is a Vacuum/Pressure Feedthrough featuring Hermetic Face Seal and T Thermocouple. Part of the 300 Series SS Nitrile O-ring and PFTFS-8 Series. Sold individually.
$1,220.95
Should ship between 09 Dec and 16 Dec
Subject to factory lead times
The Dwyer - SH-1-24-100 is a Ceramic Bead Insulator featuring Single Hole Round, Mullite, 24 AWG, 1 " L, and 1/16 " OD. Part of the SH Series. Sold as a pack of 100.
$98.88$107.24
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - SMP-HT-K-6 is a Surface Thermocouple Probe featuring Quick Connect, K Type, 6 " Probe, Ceramic Tip, 304 SS, Miniature CONN, and ANSI. It is rated for a temperature range of 0 °C to 200 °C. Part of the SMP-HT Series. Sold individually.
$123.97$134.46
Should ship between 18 Nov and 25 Nov
Subject to factory lead times
The Dwyer - SMPW-CC-K-F-100 is a Miniature Thermocouple Connector featuring Flat Pin, 2 Pins, Female, K Type, ANSI, and 100 Pack. It is rated for a temperature range of -29 °C to 180 °C (-20 °F to 356 °F). Part of the SMPW-CC Series. Sold as a pack of 100.
$547.30$593.62
Should ship between 17 Feb and 24 Feb
Subject to factory lead times
The Dwyer - TA4M is a Cord Plug for RTD & Thermistor featuring Male Connector, 4 Pins, and 2.9 mm Dia. Part of the T Series. Sold individually.
$18.41
Should ship between 06 Jan and 13 Jan
Subject to factory lead times
The Dwyer - FS-125-20-1000 is a Ceramic Bead Insulator featuring Hole Fish Spine, Steatite, 20 AWG, 0.13 " L, and 0.13 " OD. Part of the FS Series. Sold as a pack of 1000.
$95.43$103.50
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - NB16W-4 is a Thermocouple Head featuring 1/2 " NPT Tube Entry, 1/2 " NPT Process Entry, 4 Terminals (CH-74/M12), and Polypropylene. Part of the NB Series. Sold individually.
$70.86$76.85
Should ship between 10 Mar and 17 Mar
Subject to factory lead times
The Dwyer - NHX-T-M is a Standard Thermocouple Connector featuring Ceramic, Ultra High Temp, 2 Pins, Male, T Type, ANSI, and Solid Pins. It is rated for a temperature range of -29 °C to 399 °C (-20 °F to 750 °F). Part of the NHX Series. Sold individually.
$25.29$27.43
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - SSLK-516-14 is a Compression Fitting featuring 1/4 " NPT Male, 316 SS, RoHS Compliant, 39.1 mm L, and Heavy Duty Construction. Part of the OMEGALOK Series. Sold individually.
$41.20
Should ship between 25 Nov and 02 Dec
Subject to factory lead times
The Dwyer - 88L75K is a Thermocouple Handle Probe featuring Thin Leaf Surface, K Type, 60 " Cable, TPE, Flat Leaf Design, Miniature CONN, ANSI, and Element Dimension 1.5 ". It is rated for a temperature range of 0 °C to 300 °C. Sold individually.
$265.99$288.50
Should ship between 25 Nov and 02 Dec
Subject to factory lead times