Centrifugal Metallic/Non-Metallic Sealed Pumps

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST) ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER ) BEARING HOUSING (CARRIER). LOCKNUT, BEARING COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST) BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME) OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME) SNAP RING, BEARING. SCREW BEARING HOUSING SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER GASKET (ORING) TFE BEARING HOUSING JACKBOLT JAMNUTS O-RING BEARING HOUSING (1)

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST) ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME) IB AND OB BEARINGS. PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST) BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING JACK BOLT, BEARING HOUSING BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST) ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER ) BEARING HOUSING (CARRIER). LOCKNUT, BEARING COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST) BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME) OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME) SNAP RING, BEARING. SCREW BEARING HOUSING SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER GASKET (ORING) TFE BEARING HOUSING JACKBOLT JAMNUTS O-RING BEARING HOUSING (1)

INCLUDES THE FOLLOWING: 10" CASE GASKET (TFE) FRAME TO ADAPTER GASKET (VELLUMOID), IMPELLER GASKET [O-RING] (TFE) BEARING HOUSING O-RING (BUNA)

INCLUDES THE FOLLOWING: 13" CASE GASKET (TFE) FRAME TO ADAPTER GASKET (VELLUMOID) ITEM 412 IMPELLER GASKET [O-RING] (TFE) BEARING HOUSING O-RING (BUNA)

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST) ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME) IB AND OB BEARINGS. PLUG, OIL FILL 4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST) BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING JACK BOLT, BEARING HOUSING BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME) CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)

INCLUDES: FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST) ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME) IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER ) BEARING HOUSING (CARRIER). LOCKNUT, BEARING COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST) BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME) OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE) IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME) SNAP RING, BEARING. SCREW BEARING HOUSING SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING COUPLING KEY (WILL BE ATTACHED TO THE SHAFT) IMPELLER GASKET (ORING) TFE BEARING HOUSING JACKBOLT JAMNUTS O-RING BEARING HOUSING (1)