Centrifugal Metallic/Non-Metallic Sealed Pumps
Centrifugal pumps are the most common types used in industrial and commercial applications. They can move large volumes of fluids, making them ideal for water treatment plants, oil refineries, and other high-demand...
Categories in Centrifugal Metallic/Non-Metallic Sealed Pumps (1)
Industrial Centrifugal Pumps
Industrial centrifugal pumps are high-efficiency fluid transfer devices that use rotational energy to move liquids through piping systems in applications ranging from water treatment and chemical processing to HVAC and manufacturing. Known for their simple design, low maintenance, and ability to handle large volumes, these pumps are ideal for continuous-duty operations with clean or lightly contaminated fluids. Available in a variety of materials and configurations, centrifugal pumps offer reliable, cost-effective performance in demanding industrial environments.
Filter
Filter
978 items
content loaded
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-105-TFE from Mosherflo is a G196 STA LANTERN RING. Typical applications span food processing, pulp and paper, and water treatment environments. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
Engineered by Mosherflo, the G196-STA-107-SS is a G196 STA GLAND, PACKING. It is commonly found in pulp and paper, oil and gas, and food processing applications. Mosherflo products are trusted by engineers and specifiers worldwide.
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-123-NYL from Mosherflo is a G196 STA DEFLECTOR. This product serves professionals across food processing, chemical processing, and oil and gas sectors. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-1X1.5-6-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-1X1.5-8-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
The Mosherflo G196-STA-250-BB-SS is a G196 STA GLAND, TYPE 1. This product serves professionals across water treatment, chemical processing, and food processing sectors. Mosherflo is recognized globally for engineering products that meet strict performance standards.
Requires Quote
Available for Purchase
Subject to factory lead times
Engineered by Mosherflo, the G196-STA-250-SB-SS is a G196 STA GLAND, TYPE 1. Typical applications span oil and gas, chemical processing, and pulp and paper environments. Mosherflo is recognized globally for engineering products that meet strict performance standards.
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
Part number G196-STA-332A-OB-B from Mosherflo is a G196 STA OIL SEAL, OB. It is commonly found in chemical processing, water treatment, and pulp and paper applications. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-332A-OB-STL/ TFE
Engineered by Mosherflo, the G196-STA-332A-OB-STL/ TFE is a G196 STA OIL SEAL, OB. This product serves professionals across water treatment, food processing, and oil and gas sectors. Backed by Mosherflo's commitment to quality, the G196-STA-332A-OB-STL/ TFE is built to perform under real-world conditions.
Requires Quote
Available for Purchase
Subject to factory lead times
The Mosherflo G196-STA-333A-IB-B is a G196 STA OIL SEAL, IB. It is commonly found in food processing, pulp and paper, and water treatment applications. Mosherflo is recognized globally for engineering products that meet strict performance standards.
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-333A-IB-STL/ TFE
The Mosherflo G196-STA-333A-IB-STL/ TFE is a G196 STA OIL SEAL, IB. Typical applications span mining, food processing, and pulp and paper environments. Mosherflo products are trusted by engineers and specifiers worldwide.
Requires Quote
Available for Purchase
Subject to factory lead times
Part number G196-STA-360Q-C4401 from Mosherflo is a G196 STA SEAL GLAND GASKET. It is commonly found in chemical processing, oil and gas, and water treatment applications. Backed by Mosherflo's commitment to quality, the G196-STA-360Q-C4401 is built to perform under real-world conditions.
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-360Q-TFE from Mosherflo is a G196 STA SEAL GLAND GASKET. Typical applications span pulp and paper, chemical processing, and food processing environments. Mosherflo products are trusted by engineers and specifiers worldwide.
Requires Quote
Available for Purchase
Subject to factory lead times
QTY. 1 EA 6" CASE GASKET (TFE)
QTY. 1 IMPELLER O-RING (GASKET) [TFE]
QTY. 1 BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
QTY. 1 8" CASE GASKET (TFE)
QTY. 1 IMPELLER O-RING (GASKET) [TFE]
QTY. 1 BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES THE FOLLOWING:
13" CASE GASKET (TFE)
XLTA END COVER GASKET (VEL)
FRAME TO ADAPTER GASKET (VEL) ITEM 412 IMPELLER GASKET [O-RING] (TFE)
BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES THE FOLLOWING:
15" CASE GASKET (TFE)
XLTA END COVER GASKET (VEL)
FRAME TO ADAPTER GASKET (VEL) ITEM 412 IMPELLER GASKET [O-RING] (TFE)
BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES THE FOLLOWING:
17" CASE GASKET (TFE)
XLTA END COVER GASKET (VEL)
FRAME TO ADAPTER GASKET (VEL)
IMPELLER GASKET [O-RING] (TFE)
BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-105-TFE from Mosherflo is a G196 STA LANTERN RING. Typical applications span food processing, pulp and paper, and water treatment environments. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
Engineered by Mosherflo, the G196-STA-107-SS is a G196 STA GLAND, PACKING. It is commonly found in pulp and paper, oil and gas, and food processing applications. Mosherflo products are trusted by engineers and specifiers worldwide.
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-123-NYL from Mosherflo is a G196 STA DEFLECTOR. This product serves professionals across food processing, chemical processing, and oil and gas sectors. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-1X1.5-6-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-1X1.5-8-BPA-DI
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
The Mosherflo G196-STA-250-BB-SS is a G196 STA GLAND, TYPE 1. This product serves professionals across water treatment, chemical processing, and food processing sectors. Mosherflo is recognized globally for engineering products that meet strict performance standards.
Requires Quote
Available for Purchase
Subject to factory lead times
Engineered by Mosherflo, the G196-STA-250-SB-SS is a G196 STA GLAND, TYPE 1. Typical applications span oil and gas, chemical processing, and pulp and paper environments. Mosherflo is recognized globally for engineering products that meet strict performance standards.
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (UNLESS 6" STA IN WHICH THE ADAPTER IS CAST INTO THE FRAME)
IB AND OB BEARINGS. PLUG, OIL FILL
4140 SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER
BEARING HOUSING. LOCKNUT, BEARING. COVER CBS (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT. OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
SNAP RING, BEARING. FRAME TO ADAPTER BOLTS (4). BOLT, FRAME / BEARING HOUSING
JACK BOLT, BEARING HOUSING
BOLT FRAME FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
LOCKWASHER, BEARING. COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER ORING TFE. BEARING HOUSING JACKBOLT JAMNUTS
FRAME TO ADAPTER DOWEL PINS (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
WASHER, FRAME FOOT TO FOOT (NOT INCLUDED IN STA AS FRAME IS CAST INTO FRAME)
CUSTOMER MUST REQUEST PACKING KIT OR MECHANICAL SEAL TO BE INSTALLED - SEPARATE COST AND LINE ITEM IF REQUIRED
ALL OF THESE ITEMS WILL COME COMPLETELY ASSEMBLED AND PAINTED (CASING GASKET WILL BE ATTACHED TO THE ADAPTER WITH A ZIPTIE OR IN A SEPARATE BOX)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES:
FULL DIAMETER IMPELLER 316SS/CD4 IMPELLER (TRIM IS AN ADDER COST)
ADAPTER (ADAPTER NOT INCLUDED ON 6-8” MIIIG1 AS IT IS CAST INTO FRAME)
IB AND OB BEARINGS (TIMKEN OR EQUAL). PLUG, OIL FILL
SHAFT W/316SS SLEEVE (SOLID 316SS SHAFT -NO SLEEVE; OR SLEEVE-TYPE SS SHAFT WITH 316SS SLEEVE IS AN ADDER )
BEARING HOUSING (CARRIER). LOCKNUT, BEARING
COVER CBS (DI—WILL HAVE DI COVER) (SS — WILL HAVE SS/CD4 COVER*) (CBL/FML COVER IS AN ADDER COST)
BEARING FRAME. BEARING FRAME FOOT (NOT INCLUDED ON STA AS IT IS CAST INTO FRAME)
OIL, SIGHT GAUGE (TRITAN AS STANDARD 3D BULLSEYE)
IB AND OB BRONZE INPRO ISOLATORS. CASE GASKET TFE
FRAME TO ADAPTER GASKET (NOT INCLUDED ON STA 6” OR 8” AS IT IS CAST INTO FRAME)
SNAP RING, BEARING. SCREW BEARING HOUSING
SCREW BEARING CARRIER. SCREW FOOT. LOCKWASHER, BEARING
COUPLING KEY (WILL BE ATTACHED TO THE SHAFT)
IMPELLER GASKET (ORING) TFE
BEARING HOUSING JACKBOLT JAMNUTS
O-RING BEARING HOUSING (1)
Requires Quote
Available for Purchase
Subject to factory lead times
Part number G196-STA-332A-OB-B from Mosherflo is a G196 STA OIL SEAL, OB. It is commonly found in chemical processing, water treatment, and pulp and paper applications. As a leader in positive displacement pumps and fluid handling, Mosherflo manufactures every component to exacting standards.
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-332A-OB-STL/ TFE
Engineered by Mosherflo, the G196-STA-332A-OB-STL/ TFE is a G196 STA OIL SEAL, OB. This product serves professionals across water treatment, food processing, and oil and gas sectors. Backed by Mosherflo's commitment to quality, the G196-STA-332A-OB-STL/ TFE is built to perform under real-world conditions.
Requires Quote
Available for Purchase
Subject to factory lead times
The Mosherflo G196-STA-333A-IB-B is a G196 STA OIL SEAL, IB. It is commonly found in food processing, pulp and paper, and water treatment applications. Mosherflo is recognized globally for engineering products that meet strict performance standards.
Requires Quote
Available for Purchase
Subject to factory lead times
MPN:G196-STA-333A-IB-STL/ TFE
The Mosherflo G196-STA-333A-IB-STL/ TFE is a G196 STA OIL SEAL, IB. Typical applications span mining, food processing, and pulp and paper environments. Mosherflo products are trusted by engineers and specifiers worldwide.
Requires Quote
Available for Purchase
Subject to factory lead times
Part number G196-STA-360Q-C4401 from Mosherflo is a G196 STA SEAL GLAND GASKET. It is commonly found in chemical processing, oil and gas, and water treatment applications. Backed by Mosherflo's commitment to quality, the G196-STA-360Q-C4401 is built to perform under real-world conditions.
Requires Quote
Available for Purchase
Subject to factory lead times
The G196-STA-360Q-TFE from Mosherflo is a G196 STA SEAL GLAND GASKET. Typical applications span pulp and paper, chemical processing, and food processing environments. Mosherflo products are trusted by engineers and specifiers worldwide.
Requires Quote
Available for Purchase
Subject to factory lead times
QTY. 1 EA 6" CASE GASKET (TFE)
QTY. 1 IMPELLER O-RING (GASKET) [TFE]
QTY. 1 BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
QTY. 1 8" CASE GASKET (TFE)
QTY. 1 IMPELLER O-RING (GASKET) [TFE]
QTY. 1 BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES THE FOLLOWING:
13" CASE GASKET (TFE)
XLTA END COVER GASKET (VEL)
FRAME TO ADAPTER GASKET (VEL) ITEM 412 IMPELLER GASKET [O-RING] (TFE)
BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES THE FOLLOWING:
15" CASE GASKET (TFE)
XLTA END COVER GASKET (VEL)
FRAME TO ADAPTER GASKET (VEL) ITEM 412 IMPELLER GASKET [O-RING] (TFE)
BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
INCLUDES THE FOLLOWING:
17" CASE GASKET (TFE)
XLTA END COVER GASKET (VEL)
FRAME TO ADAPTER GASKET (VEL)
IMPELLER GASKET [O-RING] (TFE)
BEARING HOUSING O-RING (BUNA)
Requires Quote
Available for Purchase
Subject to factory lead times
FAQS
- A centrifugal pump uses an impeller to create rotational energy that moves fluid through the pump. As the impeller spins, it increases fluid velocity and converts it into pressure, allowing the pump to transfer liquid efficiently.
- Centrifugal pumps are used for water transfer, HVAC systems, irrigation, chemical processing, industrial fluid circulation, boiler feed, cooling systems, and general plant operations. They are ideal for clean or lightly contaminated fluids.
- Common types include end suction pumps, inline pumps, multistage pumps, self priming pumps, magnetic drive pumps, and ANSI process pumps. Each style is designed for specific flow, pressure, and installation needs.
- To size a centrifugal pump, determine required flow rate (GPM), total dynamic head (TDH), fluid type, temperature, suction conditions, and available power. Reviewing the manufacturer’s pump curves helps identify the right model.
- A non metallic sealed pump is a centrifugal pump built using corrosion resistant materials such as polypropylene, PVDF, or other engineered plastics. It uses a mechanical seal to prevent leakage, making it ideal for chemical and industrial fluid transfer.
- These pumps are used for chemical processing, wastewater treatment, plating, etching, semiconductor manufacturing, agriculture, and any application requiring corrosion resistant fluid handling.
- Non metallic pumps offer superior resistance to corrosive chemicals, acids, caustics, and aggressive industrial liquids. They are also lightweight, cost effective, and often longer lasting in harsh chemical environments.