Steam Products
Steam traps are automatic valves that filter out condensate and non-condensable gases such as air without allowing steam to escape. In the industry, steam is utilized regularly for heating or as driving energy for ...
Categories in Steam Product Catalog - Steam System Solutions (2)
Steam Traps
Steam traps are essential for any business that uses steam to power its machinery. They are responsible for removing condensate from the piping, which can build up and cause damage if left unchecked. Steam traps come in a variety of different designs, each with its advantages and disadvantages. The most common types are thermostatic, inverted buckets, and mechanical traps. Thermostatic traps are the most common type of steam trap, and they use a sensing element to open and close the valve in response to changes in temperature. Inverted bucket traps use a float to control the valve and are well-suited for applications where large volumes of condensate need to be removed. Mechanical traps use a diaphragm or piston to open and close the valve and are often used in high-pressure applications. No matter what type of steam trap you need, we have a complete selection available online.
Related categories: Steam Products | Heat Tracing Cables, Components, and Controllers | Steam System Ancillary Products
Steam System Ancillary Products
A steam system is only as reliable as the small components that support it. Ancillary products such as separators, air vents, vacuum breakers, sight glasses and condensate equipment protect steam quality, improve heat transfer and prevent damage like water hammer.
Steam System Products
- Separators – remove water droplets for dry steam
- Air vents and vacuum breakers – clear air and prevent vacuum lock
- Sight glasses – verify trap operation and flow
- Condensate pumps and return units – recover hot condensate
- Flash tanks and heat recovery – reuse flash steam energy
Improving Your System
Many steam problems, including water hammer, slow heat-up and cold spots, trace back to poor condensate removal or trapped air. A steam system survey can pinpoint where these components will help most, and recovering condensate saves water, chemicals and fuel.
Centro offers steam system ancillary products and can help you troubleshoot and improve your steam system.
Related categories: Steam Products | Steam Traps | Heat Tracing Cables, Components, and Controllers
Filter
Filter
1,647 items
content loaded
The Watson McDaniel WFT-250-15-N is a cast iron float & thermostatic steam trap with a 1-1/4" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. WFT Series steam traps with parallel port connections were specifically designed for removing condensate and air from HVAC and industrial process applications such as unit heaters, pressing machines, heat exchangers, and coils. They contain a high-quality welded, stainless steel thermostatic air vent and stainless steel mechanism. The WFT Series is fully repairable while the trap remains in-line.
$1,676.29
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WFT-250-16-N is a cast iron float & thermostatic steam trap with a 1-1/2" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. WFT Series steam traps with parallel port connections were specifically designed for removing condensate and air from HVAC and industrial process applications such as unit heaters, pressing machines, heat exchangers, and coils. They contain a high-quality welded, stainless steel thermostatic air vent and stainless steel mechanism. The WFT Series is fully repairable while the trap remains in-line.
$1,749.60
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WFT-250-17-N is a cast iron float & thermostatic steam trap with a 2.0" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. WFT Series steam traps with parallel port connections were specifically designed for removing condensate and air from HVAC and industrial process applications such as unit heaters, pressing machines, heat exchangers, and coils. They contain a high-quality welded, stainless steel thermostatic air vent and stainless steel mechanism. The WFT Series is fully repairable while the trap remains in-line.
$1,956.66
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT-3001-13-SW is a stainless steel thermostatic steam trap with a 3/4" socket weld connection, stainless steel internals, and a max working pressure of 650 PSI. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$539.94
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT1000-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 300 PSI. The WT1000 is a low capacity thermostatic steam trap specifically sized for steam tracing application. It is also commonly used as an air-vent for heat exchangers. The WT1000 is seal welded and therefore non-repairable.
$249.66
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT1000-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 300 PSI. The WT1000 is a low capacity thermostatic steam trap specifically sized for steam tracing application. It is also commonly used as an air-vent for heat exchangers. The WT1000 is seal welded and therefore non-repairable.
$249.66
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2001-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT2000 is a medium capacity thermostatic steam trap made from stainless steel and is often used for process apllications because of their excellent air venting capability. These versatile traps are also used for steam tracing, as drip traps on steam mains and supply lines or as an air-vent for heat exchangers. The WT2000 is small and compact and contains an integral strainer. This steam trap is seal welded and is therefore non-repairable.
$440.87
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2001-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT2000 is a medium capacity thermostatic steam trap made from stainless steel and is often used for process apllications because of their excellent air venting capability. These versatile traps are also used for steam tracing, as drip traps on steam mains and supply lines or as an air-vent for heat exchangers. The WT2000 is small and compact and contains an integral strainer. This steam trap is seal welded and is therefore non-repairable.
$440.87
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2003-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT2000 is a medium capacity thermostatic steam trap made from stainless steel and is often used for process apllications because of their excellent air venting capability. These versatile traps are also used for steam tracing, as drip traps on steam mains and supply lines or as an air-vent for heat exchangers. The WT2000 is small and compact and contains an integral strainer. This steam trap is seal welded and is therefore non-repairable.
$440.87
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2003-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT2000 is a medium capacity thermostatic steam trap made from stainless steel and is often used for process apllications because of their excellent air venting capability. These versatile traps are also used for steam tracing, as drip traps on steam mains and supply lines or as an air-vent for heat exchangers. The WT2000 is small and compact and contains an integral strainer. This steam trap is seal welded and is therefore non-repairable.
$440.87
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2501-12-N is a cast iron thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. The WT2500 is a medium capacity thermostatic steam trap. They can be used as drip traps for removing condensate as well as air from steam mains. They are also used for removing condensate and air in process applications or for steam tracing. The WT2500 is fully in-line repairable by removing the cover and replacing the seat and thermal element.
$297.22
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2501-13-N is a cast iron thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. The WT2500 is a medium capacity thermostatic steam trap. They can be used as drip traps for removing condensate as well as air from steam mains. They are also used for removing condensate and air in process applications or for steam tracing. The WT2500 is fully in-line repairable by removing the cover and replacing the seat and thermal element.
$297.22
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2503-12-N is a cast iron thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. The WT2500 is a medium capacity thermostatic steam trap. They can be used as drip traps for removing condensate as well as air from steam mains. They are also used for removing condensate and air in process applications or for steam tracing. The WT2500 is fully in-line repairable by removing the cover and replacing the seat and thermal element.
$297.22
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2503-13-N is a cast iron thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. The WT2500 is a medium capacity thermostatic steam trap. They can be used as drip traps for removing condensate as well as air from steam mains. They are also used for removing condensate and air in process applications or for steam tracing. The WT2500 is fully in-line repairable by removing the cover and replacing the seat and thermal element.
$297.22
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$507.25
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001-12-SW is a stainless steel thermostatic steam trap with a 1/2" socket weld connection, stainless steel internals, and a max working pressure of 650 PSI. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$507.25
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$539.94
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001S-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$636.04
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001S-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$661.80
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001S-14-N is a stainless steel thermostatic steam trap with a 1.0" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$1,018.45
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001SB-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer & blowdown valve. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$749.97
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001SB-12-SW is a stainless steel thermostatic steam trap with a 1/2" socket weld connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer & blowdown valve. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$749.97
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001SB-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer & blowdown valve. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$777.71
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001SB-13-SW is a stainless steel thermostatic steam trap with a 3/4" socket weld connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer & blowdown valve. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$777.71
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WFT-250-15-N is a cast iron float & thermostatic steam trap with a 1-1/4" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. WFT Series steam traps with parallel port connections were specifically designed for removing condensate and air from HVAC and industrial process applications such as unit heaters, pressing machines, heat exchangers, and coils. They contain a high-quality welded, stainless steel thermostatic air vent and stainless steel mechanism. The WFT Series is fully repairable while the trap remains in-line.
$1,676.29
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WFT-250-16-N is a cast iron float & thermostatic steam trap with a 1-1/2" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. WFT Series steam traps with parallel port connections were specifically designed for removing condensate and air from HVAC and industrial process applications such as unit heaters, pressing machines, heat exchangers, and coils. They contain a high-quality welded, stainless steel thermostatic air vent and stainless steel mechanism. The WFT Series is fully repairable while the trap remains in-line.
$1,749.60
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WFT-250-17-N is a cast iron float & thermostatic steam trap with a 2.0" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. WFT Series steam traps with parallel port connections were specifically designed for removing condensate and air from HVAC and industrial process applications such as unit heaters, pressing machines, heat exchangers, and coils. They contain a high-quality welded, stainless steel thermostatic air vent and stainless steel mechanism. The WFT Series is fully repairable while the trap remains in-line.
$1,956.66
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT-3001-13-SW is a stainless steel thermostatic steam trap with a 3/4" socket weld connection, stainless steel internals, and a max working pressure of 650 PSI. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$539.94
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT1000-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 300 PSI. The WT1000 is a low capacity thermostatic steam trap specifically sized for steam tracing application. It is also commonly used as an air-vent for heat exchangers. The WT1000 is seal welded and therefore non-repairable.
$249.66
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT1000-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 300 PSI. The WT1000 is a low capacity thermostatic steam trap specifically sized for steam tracing application. It is also commonly used as an air-vent for heat exchangers. The WT1000 is seal welded and therefore non-repairable.
$249.66
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2001-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT2000 is a medium capacity thermostatic steam trap made from stainless steel and is often used for process apllications because of their excellent air venting capability. These versatile traps are also used for steam tracing, as drip traps on steam mains and supply lines or as an air-vent for heat exchangers. The WT2000 is small and compact and contains an integral strainer. This steam trap is seal welded and is therefore non-repairable.
$440.87
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2001-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT2000 is a medium capacity thermostatic steam trap made from stainless steel and is often used for process apllications because of their excellent air venting capability. These versatile traps are also used for steam tracing, as drip traps on steam mains and supply lines or as an air-vent for heat exchangers. The WT2000 is small and compact and contains an integral strainer. This steam trap is seal welded and is therefore non-repairable.
$440.87
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2003-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT2000 is a medium capacity thermostatic steam trap made from stainless steel and is often used for process apllications because of their excellent air venting capability. These versatile traps are also used for steam tracing, as drip traps on steam mains and supply lines or as an air-vent for heat exchangers. The WT2000 is small and compact and contains an integral strainer. This steam trap is seal welded and is therefore non-repairable.
$440.87
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2003-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT2000 is a medium capacity thermostatic steam trap made from stainless steel and is often used for process apllications because of their excellent air venting capability. These versatile traps are also used for steam tracing, as drip traps on steam mains and supply lines or as an air-vent for heat exchangers. The WT2000 is small and compact and contains an integral strainer. This steam trap is seal welded and is therefore non-repairable.
$440.87
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2501-12-N is a cast iron thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. The WT2500 is a medium capacity thermostatic steam trap. They can be used as drip traps for removing condensate as well as air from steam mains. They are also used for removing condensate and air in process applications or for steam tracing. The WT2500 is fully in-line repairable by removing the cover and replacing the seat and thermal element.
$297.22
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2501-13-N is a cast iron thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. The WT2500 is a medium capacity thermostatic steam trap. They can be used as drip traps for removing condensate as well as air from steam mains. They are also used for removing condensate and air in process applications or for steam tracing. The WT2500 is fully in-line repairable by removing the cover and replacing the seat and thermal element.
$297.22
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2503-12-N is a cast iron thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. The WT2500 is a medium capacity thermostatic steam trap. They can be used as drip traps for removing condensate as well as air from steam mains. They are also used for removing condensate and air in process applications or for steam tracing. The WT2500 is fully in-line repairable by removing the cover and replacing the seat and thermal element.
$297.22
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT2503-13-N is a cast iron thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 250 PSI. The WT2500 is a medium capacity thermostatic steam trap. They can be used as drip traps for removing condensate as well as air from steam mains. They are also used for removing condensate and air in process applications or for steam tracing. The WT2500 is fully in-line repairable by removing the cover and replacing the seat and thermal element.
$297.22
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$507.25
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001-12-SW is a stainless steel thermostatic steam trap with a 1/2" socket weld connection, stainless steel internals, and a max working pressure of 650 PSI. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$507.25
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$539.94
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001S-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$636.04
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001S-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$661.80
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001S-14-N is a stainless steel thermostatic steam trap with a 1.0" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$1,018.45
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001SB-12-N is a stainless steel thermostatic steam trap with a 1/2" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer & blowdown valve. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$749.97
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001SB-12-SW is a stainless steel thermostatic steam trap with a 1/2" socket weld connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer & blowdown valve. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$749.97
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001SB-13-N is a stainless steel thermostatic steam trap with a 3/4" NPT connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer & blowdown valve. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$777.71
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The Watson McDaniel WT3001SB-13-SW is a stainless steel thermostatic steam trap with a 3/4" socket weld connection, stainless steel internals, and a max working pressure of 650 PSI. This steam trap has a strainer & blowdown valve. The WT3000 is a medium capacity thermostatic steam trap which was specifically designed for removing condensate and air from process applications. The body is made from stainless steel and is fully repairable while the product remains in-line.
$777.71
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
FAQS
- Steam products encompass the equipment and components used to generate, distribute, control, and recover steam in industrial and commercial facilities. Steam is one of the most widely used energy transfer media in industry — powering heat exchangers, sterilizers, dryers, turbines, humidification systems, and process heating across food and beverage, pharmaceutical, chemical, hospital, and manufacturing operations. Properly specified and maintained steam system components — including steam traps, pressure reducing valves, control valves, strainers, separators, and condensate recovery equipment — ensure that steam energy is delivered efficiently, condensate is removed promptly, and the system operates safely. Poorly maintained steam systems waste enormous amounts of energy and water, making steam system management a high-impact area for operational efficiency.
- A steam system begins at the boiler, which heats water to produce steam at a controlled pressure. The steam is distributed through insulated piping to points of use — heat exchangers, jacketed vessels, coils, sterilizers, and other process equipment — where it transfers its latent heat energy to the product or process. As steam releases its heat energy, it condenses back into hot water (condensate). Steam traps at each point of use automatically remove this condensate and any non-condensable gases (primarily air and CO2) while preventing live steam from escaping. The condensate is then returned to the boiler feedwater system through condensate return piping and a receiver tank, recovering both water and heat energy. Pressure reducing valves step the steam pressure down from the high-pressure distribution main to the lower pressure required by individual equipment. The efficiency of the entire system depends on every component working correctly — particularly the steam traps, which are the most failure-prone element.
- Condensate is hot, purified water that has already been chemically treated for boiler use — returning it to the boiler feedwater system recovers both its heat energy and its water treatment value, significantly reducing fuel, water, and chemical treatment costs. Every gallon of condensate that is dumped to drain instead of returned must be replaced with cold makeup water that must be heated from ambient temperature and chemically treated from scratch. In a typical plant, recovering condensate can reduce fuel costs by 10–20% and water treatment costs by a similar margin. Condensate recovery also reduces the thermal and chemical load on the boiler, extending its service life. A well-designed condensate return system includes properly functioning steam traps (to ensure only condensate enters the return line, not live steam), condensate return piping, a vented or pressurized receiver tank, and a condensate pump to push the return water back to the boiler.
- A pressure reducing valve (PRV) automatically reduces steam pressure from a higher upstream supply pressure to a lower, controlled downstream pressure required by the process equipment. Most steam boilers generate steam at a single high pressure for efficient distribution through the plant, but individual pieces of equipment — heat exchangers, sterilizers, humidifiers, jacketed kettles — each require steam at a specific lower pressure matched to their design temperature. PRVs are installed at each pressure transition point in the distribution system. They maintain a constant downstream pressure regardless of fluctuations in upstream supply pressure or downstream demand. Correct PRV selection requires matching the valve to the required downstream pressure, the steam flow rate (capacity), and the pressure ratio between inlet and outlet. Pilot-operated PRVs offer tighter pressure control than direct-acting types and are preferred for critical process applications.
- The highest-impact efficiency improvements in most steam systems involve three areas: steam trap maintenance, insulation, and condensate recovery. Failed steam traps — particularly those that have failed open and are blowing live steam to the condensate return or atmosphere — are the single largest source of energy waste; a regular steam trap survey and replacement program typically delivers rapid payback. Uninsulated or poorly insulated steam piping, valves, and fittings radiate heat continuously — insulating bare surfaces with properly rated pipe insulation and removable insulation jackets for valves and fittings reduces heat loss dramatically. Maximizing condensate return (as discussed above) recovers heat and water. Additional measures include repairing steam leaks, optimizing boiler combustion, installing flash steam recovery vessels, right-sizing pressure reducing valves, and implementing steam system monitoring to detect problems early. Many facilities recover 10–30% of their steam energy costs through a systematic efficiency improvement program.