Solenoid Valves
Solenoid valves provide fast, reliable on/off control of water, air, gas, oil, steam and chemicals using an electrical signal. They automate filling, dispensing, cooling, cleaning and safety shutoff in countless machines and systems.
Solenoid Valve Types
- 2-way valves – simple open/close flow control
- 3-way and 4-way valves – divert flow or operate actuators
- Direct-acting valves – work from zero pressure
- Pilot-operated valves – larger flows at line pressure
- Specialty valves – steam, fuel gas, cryogenic and proportional
Choosing a Solenoid Valve
Confirm the media, pressure range (including minimum pressure differential), temperature, port size and Cv. Choose body and seal materials compatible with the fluid, and select a coil voltage and enclosure rating for the location. Normally closed or normally open depends on the fail-safe state you need.
Centro carries solenoid valves for water, air, steam, gas and process applications.
Related categories: Valves | Sampling Valves | Plumbing Valves | Plug Valves | Sanitary Valves
Filter
Filter
95,591 items
content loaded
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This valve comes with a 110 VAC voltage.
$166.72$182.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Designed with a 120 VAC voltage.
$166.72$182.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Key details include a 24 VAC voltage.
$166.72$182.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This valve is configured with a 12 VDC voltage.
$173.13$189.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This model features a 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid actuation, 100 VAC voltage, engineered plastics body material, and NBR seating elastomer.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Specifications include a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 1/4" NPT pipe size, and 9/64" orifice, with an engineered plastics body material, NBR seating elastomer, 50 Hz frequency, and 110 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Configured with a 2 way - 2/2 normally closed valve function, solenoid actuation, 1/4" NPT pipe size, engineered plastics body material, 50/60 Hz frequency, and 100/110 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Built for a 2 way - 2/2 normally closed valve function and solenoid actuation, this valve features a 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, NBR seating elastomer, 60 Hz frequency, and 110 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This valve comes with a 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid actuation, 50 Hz frequency, 115 VAC voltage, engineered plastics body material, and NBR seating elastomer.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This model features a 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid actuation, 60 Hz frequency, 12 VAC voltage, engineered plastics body material, and NBR seating elastomer.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Designed with an engineered plastics body material and 1/4" NPT pipe size, this model provides a 2 way - 2/2 normally closed valve function, solenoid actuation, 50 Hz frequency, and 120 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Key details include an engineered plastics body material, NBR seating elastomer, 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 50/60 Hz frequency, and 110/120 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Equipped with a 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, and NBR seating elastomer, this valve is configured with a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 60 Hz frequency, and 120 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Specifications include a 2 way - 2/2 normally closed valve function, solenoid actuation, and 1/4" NPT pipe size, with an engineered plastics body material, 50 Hz frequency, and 200 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Configured with a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, NBR seating elastomer, 60 Hz frequency, and 208 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Key details include an engineered plastics body material, 1/4" NPT pipe size, 2 way - 2/2 normally closed valve function, solenoid actuation, 50 Hz frequency, and 22 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Built for a 2 way - 2/2 normally closed valve function and solenoid - direct acting actuation, this valve features a 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, NBR seating elastomer, 50 Hz frequency, and 220 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This valve comes with a 1/4" NPT pipe size, 2 way - 2/2 normally closed valve function, solenoid actuation, 50/60 Hz frequency, 200/220 VAC voltage, and engineered plastics body material.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Designed with an engineered plastics body material, NBR seating elastomer, 1/4" NPT pipe size, and 9/64" orifice, this model provides a 2 way - 2/2 normally closed valve function, solenoid actuation, 60 Hz frequency, and 220 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Specifications include a 2 way - 2/2 normally closed valve function, solenoid actuation, and 1/4" NPT pipe size, with an engineered plastics body material, 50/60 Hz frequency, and 22/24 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Configured with a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, NBR seating elastomer, 60 Hz frequency, and 24 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Equipped with a 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, and NBR seating elastomer, this valve is configured with a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 50/60 Hz frequency, and 220/240 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This model features a 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 60 Hz frequency, 240 VAC voltage, engineered plastics body material, and NBR seating elastomer.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Built for a 2 way - 2/2 normally closed valve function and solenoid actuation, this valve features a 1/4" NPT pipe size, engineered plastics body material, 50 Hz frequency, and 415 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This valve comes with a 110 VAC voltage.
$166.72$182.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Designed with a 120 VAC voltage.
$166.72$182.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Key details include a 24 VAC voltage.
$166.72$182.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This valve is configured with a 12 VDC voltage.
$173.13$189.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This model features a 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid actuation, 100 VAC voltage, engineered plastics body material, and NBR seating elastomer.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Specifications include a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 1/4" NPT pipe size, and 9/64" orifice, with an engineered plastics body material, NBR seating elastomer, 50 Hz frequency, and 110 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Configured with a 2 way - 2/2 normally closed valve function, solenoid actuation, 1/4" NPT pipe size, engineered plastics body material, 50/60 Hz frequency, and 100/110 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Built for a 2 way - 2/2 normally closed valve function and solenoid actuation, this valve features a 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, NBR seating elastomer, 60 Hz frequency, and 110 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This valve comes with a 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid actuation, 50 Hz frequency, 115 VAC voltage, engineered plastics body material, and NBR seating elastomer.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This model features a 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid actuation, 60 Hz frequency, 12 VAC voltage, engineered plastics body material, and NBR seating elastomer.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Designed with an engineered plastics body material and 1/4" NPT pipe size, this model provides a 2 way - 2/2 normally closed valve function, solenoid actuation, 50 Hz frequency, and 120 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Key details include an engineered plastics body material, NBR seating elastomer, 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 50/60 Hz frequency, and 110/120 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Equipped with a 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, and NBR seating elastomer, this valve is configured with a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 60 Hz frequency, and 120 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Specifications include a 2 way - 2/2 normally closed valve function, solenoid actuation, and 1/4" NPT pipe size, with an engineered plastics body material, 50 Hz frequency, and 200 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Configured with a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, NBR seating elastomer, 60 Hz frequency, and 208 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Key details include an engineered plastics body material, 1/4" NPT pipe size, 2 way - 2/2 normally closed valve function, solenoid actuation, 50 Hz frequency, and 22 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Built for a 2 way - 2/2 normally closed valve function and solenoid - direct acting actuation, this valve features a 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, NBR seating elastomer, 50 Hz frequency, and 220 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This valve comes with a 1/4" NPT pipe size, 2 way - 2/2 normally closed valve function, solenoid actuation, 50/60 Hz frequency, 200/220 VAC voltage, and engineered plastics body material.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Designed with an engineered plastics body material, NBR seating elastomer, 1/4" NPT pipe size, and 9/64" orifice, this model provides a 2 way - 2/2 normally closed valve function, solenoid actuation, 60 Hz frequency, and 220 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Specifications include a 2 way - 2/2 normally closed valve function, solenoid actuation, and 1/4" NPT pipe size, with an engineered plastics body material, 50/60 Hz frequency, and 22/24 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Configured with a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, NBR seating elastomer, 60 Hz frequency, and 24 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Equipped with a 1/4" NPT pipe size, 9/64" orifice, engineered plastics body material, and NBR seating elastomer, this valve is configured with a 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 50/60 Hz frequency, and 220/240 VAC voltage.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. This model features a 1/4" NPT pipe size, 9/64" orifice, 2 way - 2/2 normally closed valve function, solenoid - direct acting actuation, 60 Hz frequency, 240 VAC voltage, engineered plastics body material, and NBR seating elastomer.
$152.98$167.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
The ASCO Series 260, also known as 8260, is a corrosion-resistant, plastic body solenoid valve. The valves are available with compression fitting ends for metal or plastic tubes to save installation cost. The 260 Series is suitable for analytical and diagnostic equipment, life science, and press room and metal stamping applications. Built for a 2 way - 2/2 normally closed valve function and solenoid actuation, this valve features a 1/4" NPT pipe size, engineered plastics body material, 50 Hz frequency, and 415 VAC voltage.
$408.54$446.00
Should ship between 20 Nov and 04 Dec
Subject to factory lead times
FAQS
- A solenoid valve is an electrically operated valve that controls the flow of liquids or gases. It uses an electromagnetic coil to open or close the valve automatically when energized.
- When electrical current flows through the solenoid coil, it creates a magnetic field that moves an internal plunger. This movement opens or closes the valve, allowing or stopping flow.
- Common types include normally closed (NC), normally open (NO), direct acting, pilot operated, two way, three way, and four way solenoid valves.
- Solenoid valves are commonly made with brass or stainless-steel bodies, and sometimes plastic (PVC, PP, PVDF) for chemical service. Internal parts are typically stainless steel, and the seals are usually NBR (Buna-N), EPDM, FKM (Viton), or PTFE (Teflon) depending on the fluid and temperature.
- Solenoid valves can handle water, air, steam, oil, fuels, and many chemicals. Fluid compatibility depends on valve body material and seal selection.