How to choose a pneumatic cylinder for linear movement

Selecting the right pneumatic cylinder starts with defining the four core parameters of your application. Define four core parameters: bore size (force output = pressure × piston area, plus a 25–50% safety factor), stroke length (match to required travel, avoid excess), mounting style (fixed, flange, or pivot to suit your mechanical arrangement), and environment (standard, washdown, or food-grade seals). Speed is controlled by external flow valves, not cylinder selection. For precise positioning, consider a guided or rodless cylinder with position sensing rather than a standard unit.

Soft starter vs VFD for motor control

A soft starter ramps voltage at startup to limit inrush current and reduce mechanical shock, then steps aside once the motor reaches full speed. Use one when smooth starting is your only requirement. A VFD controls motor speed continuously throughout operation, making it the right choice whenever the process needs variable speed — conveyors, pumps, fans — and it delivers significant energy savings in centrifugal applications. If you only need a gentle start, use a soft starter. If you need speed control at any point during operation, invest in a VFD.

Benefits of using PLCs in manufacturing automation

PLCs are purpose-built for industrial environments — they tolerate heat, vibration, and electrical noise while executing control logic in deterministic millisecond scan cycles. They replace hardwired relay logic with reprogrammable software, making process changes fast and inexpensive. Built-in diagnostics centralize fault visibility and cut troubleshooting time. Modern PLCs integrate with HMIs, SCADA, and enterprise networks via standard protocols, enabling real-time data collection. Modular architecture means the system scales as the application grows.

how do you choose the right electrical enclosure for a project

Start with the NEMA or IP rating: NEMA 1 for basic indoor use, NEMA 4/4X for washdown and outdoor exposure (4X adds corrosion resistance), NEMA 7/9 for hazardous classified locations. Size the enclosure with 20–30% spare interior space for future additions and adequate heat dissipation. Choose material based on environment — painted steel for standard indoor use, stainless for washdown or chemical exposure, fiberglass for highly corrosive areas. Verify any required certifications (UL, CSA, ATEX) before specifying.

Solenoid valves vs. manual directional control valves in automation

Solenoid valves are electrically actuated and can be triggered instantly by a PLC or control system, making them essential for automated, repeatable, or high-cycle applications. Manual directional control valves require a person to physically shift the valve and are appropriate for infrequent operations, manual overrides, or applications with no control system. In practice, most automated systems use solenoid valves for normal operation with a manual override built in for setup, maintenance, and emergency use. If the valve must respond to a signal, cycle repeatedly, or operate unattended, solenoid is the correct choice.

Pneumatic and Electronic Controls - Allen-Bradley

Centro provides various products, including valves, motion control, electrical enclosures, HMIs, power tools, and electric control systems. In addition to these products, we offer compressed air products to power p...

Categories from Allen-Bradley (1)

Circuit Breaker Accessories

Circuit breaker accessories are components that enhance the functionality and safety of electrical systems. Browse our selection of circuit breaker accessories or contact us to speak to a product expert.

Filter

In Stock Only

Filter

32 items

Sort by:

content loaded

Compare

Pneumatic and Electronic Controls - Allen-Bradley

$128.72

$147.26

$2.06

$2.88

$75.34

$75.34

$62.75

$11.32

$19.11

$2.11

$6.76

$19.39

$75.34

$72.20

$5.15

$5.41

$5.41

$5.41

$129.58

$62.71

$3,157.47

$361.55

$39.03

$22.80

$128.72

$147.26

$2.06

$2.88

$75.34

$75.34

$62.75

$11.32

$19.11

$2.11

$6.76

$19.39

$75.34

$72.20

$5.15

$5.41

$5.41

$5.41

$129.58

$62.71

$3,157.47

$361.55

$39.03

$22.80

Orders & purchases

Divisions