What is industrial filtration and why is it important for manufacturing?

Industrial filtration is the process of removing unwanted contaminants — solid particles, liquids, gases, and biological material — from air, water, process fluids, and gas streams in manufacturing and processing facilities. It is important because contamination directly impacts product quality, equipment life, worker safety, and regulatory compliance. Without effective filtration, particulates damage pumps, valves, heat exchangers, and instrumentation; airborne dust creates explosion hazards and respiratory risks; and product contamination leads to batch rejection, customer complaints, and regulatory violations. Filtration technologies span a wide range — from simple Y-strainers that catch pipe debris to sub-micron cartridge filters that purify pharmaceutical-grade liquids, from bag filters handling high-volume process streams to coalescing filters that remove oil aerosols from compressed air. The right filtration strategy protects capital equipment, ensures product meets specification, keeps workers safe, and helps facilities comply with EPA, OSHA, FDA, and other regulatory requirements.

How do I choose the right type of filter for my application?

Choosing the right filter starts with four questions: what are you filtering (liquid, gas, air, or steam), what contaminants are you removing (particles, oil, water, biological material), what particle size must be captured (measured in microns), and what flow rate and pressure does the system require? For liquid filtration, bag filters and cartridge filters are the primary options — bag filters handle higher flow rates and larger particle loads cost-effectively, while cartridge filters provide finer filtration down to sub-micron levels. For gas and compressed air filtration, particulate filters remove solid particles, coalescing filters remove oil and water aerosols, and adsorption filters remove oil vapor and odors. For pipeline protection, strainers (Y-strainers and basket strainers) are installed upstream of pumps, valves, and instruments to catch large debris. For airborne dust and particulate, dust collectors with cartridge or bag filtration media capture contaminants at the source. The operating environment, chemical compatibility, temperature, and regulatory requirements further narrow the selection to the correct filter type, media material, and housing configuration.

What does micron rating mean on a filter and how do I select the right one?

A micron rating indicates the size of the smallest particles a filter is designed to capture, measured in micrometers (µm). One micron is one-millionth of a meter — for reference, a human hair is roughly 70 microns in diameter, and bacteria are typically 0.5 to 5 microns. Filters are available from coarse ratings (100–200 microns for large debris) down to sub-micron ratings (0.01–1 micron for fine particulate, oil aerosols, and biological contaminants). Selecting the right micron rating depends on what you are protecting downstream and the quality specification your process requires. A coarse strainer (40–100 microns) upstream of a pump protects the pump from pipe scale and debris. A 5–25 micron bag or cartridge filter in a process line removes visible particulates. A 1 micron or finer cartridge filter is needed for pharmaceutical, food and beverage, or electronics manufacturing applications where product purity standards are stringent. Also consider whether you need a nominal rating (captures a percentage of particles at the stated size) or an absolute rating (captures virtually all particles at the stated size) — absolute-rated filters provide higher assurance for critical applications.

How often should I replace or clean industrial filters?

Filter replacement or cleaning frequency depends on the contaminant load, flow rate, filter type, and how you monitor filter condition. The most reliable indicator is differential pressure — the pressure drop across the filter measured between the inlet and outlet. A clean filter has a low differential pressure; as the filter captures contaminants, the media becomes increasingly restricted and the differential pressure rises. Most filter housings include differential pressure gauges or ports for gauges. When the differential pressure reaches the manufacturer's recommended maximum (typically 15–35 psi for liquid filters, 2–10 psi for gas filters), the filter element should be replaced or cleaned. Operating beyond the maximum differential pressure risks filter bypass, media collapse, or contaminant breakthrough. In practice, many facilities establish a time-based replacement schedule as a baseline (monthly, quarterly, or semi-annually depending on conditions) and supplement it with differential pressure monitoring. Applications with highly variable contaminant loads benefit most from continuous differential pressure monitoring with alarms set at warning and change-out thresholds.

Filtration - Apollo Valves

Filtration protects equipment, products, people and the environment by removing contaminants from liquids, gases and air. From building HVAC to heavy industrial processes, the right filtration lowers costs and impr...

Categories from Apollo Valves (1)

Commercial Filtration

Commercial buildings, schools, hospitals and light industrial spaces depend on filtration to keep air clean and equipment running. Commercial filtration products are designed to be simple to install and change while meeting indoor air quality and building code requirements.

Commercial Filtration Products

Pleated panel filters – MERV-rated filters for HVAC air handlers and rooftop units
Bag and pocket filters – high dust-holding capacity for larger air systems
HEPA filters – for cleanrooms, healthcare and critical environments
Carbon filters – odor and VOC control for kitchens, labs and occupied spaces
Water filters – sediment and carbon cartridges for building water and ice machines

Choosing a Filter

Check the filter dimensions and the MERV rating your system can handle. A higher efficiency filter improves air quality but can restrict airflow on older equipment. Setting a regular change schedule, or monitoring pressure drop, keeps fans efficient and stops dust from bypassing the filter.

Centro supplies commercial filtration for facility managers and contractors, and our team can help you match the right filter size and efficiency to your building.

Related categories: Filtration | Industrial Filtration

Filter

In Stock Only

Filter

15 items

Sort by:

content loaded

Compare

Filtration - Apollo Valves

Commercial Filtration Products

Choosing a Filter

$235.27$278.56

$133.10$236.42

$358.04$423.92

$294.06$348.17

$117.64$139.29

$59.89$106.39

$485.91$575.31

$145.55$172.33

$88.73$157.61

$247.02$292.47

$389.84$461.57

$308.79$365.60

$121.23$143.54

$510.20$604.07

$152.83$180.95