Valves - Numatics
Industrial valves control, regulate, isolate, and direct the flow of liquids, gases, steam, slurries, and other process media. From simple shutoff applications to precise flow control and pressure protection, selec...
Pneumatic control valves are essential components used in pneumatic systems to regulate and control the flow of compressed air or gas. These valves are crucial in various industrial applications, including automation, manufacturing, and process control. Pneumatic control valves are designed to receive signals from pneumatic controllers or other control devices, allowing for precise airflow, pressure, and direction adjustment. By opening or closing specific ports or channels, these valves enable the efficient control of pneumatic actuators, such as cylinders or motors. They offer fast response times, high repeatability, and reliable operation, making them ideal for applications requiring precise and dynamic control of pneumatic systems.
Flow control valves are essential devices used in fluid control systems to regulate the flow rate within a pipeline or system. These valves allow for precise adjustment of flow rates, ensuring optimal performance and efficiency. By controlling the opening or closing of the valve or by using throttling mechanisms, flow control valves can increase or decrease the flow rate as desired. This enables operators to maintain stable flow conditions, prevent fluid overload, and achieve accurate flow control for various applications. Flow control valves are commonly used in manufacturing, oil and gas, water treatment, and HVAC systems, where precise flow management is critical for operational success.
Proportional valves are advanced control valves that provide precise and proportional control over fluid flow rates or pressures. These valves are designed to accurately regulate the flow or pressure of liquids or gases in various industrial applications. Proportional valves offer the ability to adjust the valve opening or position in proportion to an input signal, typically an electrical or analog signal. This allows for fine-tuned control and modulation of the flow or pressure, enabling precise adjustments based on system requirements. Proportional valves are commonly used in automation, robotics, process control, and hydraulic systems, where precise and dynamic control is essential for optimal performance.
Solenoid valves provide fast, reliable on/off control of liquids and gases by utilizing an electric coil to actuate the valve. Compact and efficient, they integrate seamlessly into automated systems for applications such as cooling, lubrication, chemical dosing, and process isolation. Available in a variety of materials and designs to handle different pressures, temperatures, and media.
Pneumatic accessories are additional components and devices that enhance the functionality and performance of pneumatic systems. These accessories provide expanded capabilities and increased efficiency in controlling and operating pneumatic actuators, valves, and other pneumatic equipment. Pneumatic accessories play a vital role in optimizing pneumatic system performance, ensuring reliable operation, and enhancing overall productivity in industries such as manufacturing, automation, and industrial processes.
$68.48$84.92
Subject to factory lead times
$60.68$75.24
Subject to factory lead times
$38.82$51.24
Subject to factory lead times
$51.57$63.95
Subject to factory lead times
$31.97$42.20
$35.90$44.52
Subject to factory lead times
$133.31$165.30
Subject to factory lead times
Subject to factory lead times
$58.73$77.53
Subject to factory lead times
Subject to factory lead times
$20.09$24.91
Subject to factory lead times
$40.24$49.90
Subject to factory lead times
$68.48$84.92
Subject to factory lead times
$60.68$75.24
Subject to factory lead times
$38.82$51.24
Subject to factory lead times
$51.57$63.95
Subject to factory lead times
$31.97$42.20
$35.90$44.52
Subject to factory lead times
$133.31$165.30
Subject to factory lead times
Subject to factory lead times
$58.73$77.53
Subject to factory lead times
Subject to factory lead times
$20.09$24.91
Subject to factory lead times
$40.24$49.90
Subject to factory lead times
- Use a ball valve for simple on/off shutoff, a control valve when you need to regulate flow rate or pressure, and a check valve to prevent backflow. The choice comes down to whether you need to stop flow, control it, or protect against reverse flow.
- Cv is the flow coefficient — how much water a valve passes at a given pressure drop. Full port means the valve opening matches the pipe diameter for unrestricted flow; regular port is slightly smaller. End connections describe how the valve connects to pipe (NPT threads, flanges, etc.). Body material determines compatibility with your media and environment — brass, stainless, and PVC are the most common.
- Start with your required Cv based on flow rate and pressure drop. Then confirm the valve's pressure and temperature ratings exceed your system's maximums. Undersizing causes excessive pressure drop; oversizing reduces control precision. Always size for your actual operating conditions, not system maximums.
- Fail-open means the valve opens if power or signal is lost; fail-closed means it closes — critical for safety applications. NPT is a threaded connection best for smaller pipes and lower pressures. Flanged connections bolt between pipe flanges and are preferred for larger pipes, high pressure, or applications requiring frequent removal.
- Ball valves use a rotating ball for fast quarter-turn shutoff and are ideal for frequent operation. Gate valves use a rising gate for full open/close and are better for infrequent operation where minimal flow restriction matters. Ball valves are generally more reliable, longer lasting, and easier to operate.
- Because no single valve works well in every application. Pressure, temperature, media type, flow control needs, pipe size, and safety requirements all vary dramatically across industries. Each valve type is engineered to solve a specific set of those problems efficiently.
- Ball valves offer tighter shutoff and are better for smaller lines or where zero leakage matters. Butterfly valves are lighter, more compact, and more cost-effective for larger diameter pipes. For high-volume water flow in large lines, butterfly valves are typically the practical choice.
- Look for stainless steel or carbon steel body construction, graphite or metal seat materials, and valves rated for your specific pressure-temperature combination. Globe valves and ball valves with metal seats are commonly used in high-temp applications. Always verify the valve's published P-T rating before specifying.
- Match the valve type to your application (shutoff, control, or check). Verify body material compatibility with your media. Confirm pressure and temperature ratings exceed operating conditions. Consider end connection type, actuation method, and maintenance requirements. When in doubt, over-specify on pressure rating rather than under.