Electrical Control - Pepperl-Fuchs Process Automation
Electrical controls switch and signal the operation of motors, lighting and machines. Contactors, relays and indicator lights form the backbone of control panels.
Electrical Control Products
- Control and lighting contactors – switch loads
- General purpose and timing relays – logic and delays
- Miniature contactors and accessories – compact control
- Indicator lights – status and alarm display
- Control accessories – contact blocks and legend plates
Choosing Controls
Match voltage, load ratings and coil voltage. Standardizing on one product family simplifies spares and design.
Centro supplies electrical controls for panel builders and maintenance teams.
Shop by type: Miniature Contactor Accessories | Control Contactors | Control Accessories | Lighting Contactors | Indicator Lights | General Purpose Relays | Timing Relays | Miniature Contactors
Related categories: Pneumatic and Electronic Controls | Specialty and Industry Specific Products | Uninterrupted Power Supplies | Valve Systems | Standard Power Supplies
Filter
Filter
1 item
content loaded
Pepperl & Fuchs;Inductive Sensor
$179.38
Low Stock (2)Ships within 1 business day
Pepperl & Fuchs;Inductive Sensor
$179.38
Low Stock (2)Ships within 1 business day
FAQS
- A miniature contactor and a control relay both switch electrical circuits using an electromagnetic coil, but they serve different roles in a control panel. A miniature contactor is a compact IEC-rated switching device designed to handle power loads — typically small motors up to 5 HP at 460V or resistive loads up to 20A. It switches higher-current circuits on and off and is commonly used for small conveyor motors, fans, heaters, lighting circuits, and pump auxiliaries. A control relay, by contrast, is designed for low-power signal switching — it uses a low-power coil signal to open or close one or more sets of contacts for interlocking, sequencing, and signal routing in control circuits, usually handling up to 10A. Control relays offer multiple independently switchable contact poles (commonly 2 or 4), while miniature contactors typically have three main power poles plus auxiliary contacts. Both are supported by accessories such as auxiliary contact blocks, suppressor modules, and mounting adapters that expand their functionality in panel builds.
- A miniature contactor is a compact IEC-rated contactor designed for switching small electrical loads — typically motors up to 5 HP at 460V or resistive/lighting loads up to 20A. They offer the same basic functionality as full-size contactors (electromagnetically operated switching with rated contact life) but in a significantly smaller package, often 35–45mm wide and DIN-rail mountable. Use a miniature contactor when the load is within its rating and panel space is at a premium — common applications include small conveyor motors, fans, heaters, lighting circuits, and pump auxiliaries. Their smaller coil burden also reduces the power required from the control circuit transformer or 24V DC supply, which adds up when a panel contains many contactors. If the motor or load exceeds the miniature contactor's current or horsepower rating, step up to a standard IEC contactor.
- A control relay is an electromechanical device that uses a low-power coil (typically energized by a PLC output or control circuit) to open or close one or more sets of contacts. It is designed for switching low-power signals and control circuits — not for directly switching motor loads. The key differences from a contactor are load capacity and contact configuration. Contactors are built to handle high-current power loads (motors, heaters) and typically have three main power poles plus auxiliary contacts. Control relays handle lower currents (usually up to 10A) but offer multiple independently switchable contact poles (commonly 2 or 4 poles), each configurable as normally open or normally closed. Control relays are used for signal multiplication (one PLC output controlling multiple circuits), interlocking logic, and isolating control circuits from power circuits.
- Accessories for miniature contactors and control relays expand their functionality and simplify installation. Auxiliary contact blocks add normally open (NO) or normally closed (NC) contacts to a contactor, providing status feedback to the PLC (e.g., confirming the contactor has energized). Suppressor modules — RC suppressors for AC coils and diode or varistor suppressors for DC coils — are installed across the coil to suppress voltage spikes generated when the coil de-energizes, protecting PLC outputs and extending contact life. Mechanical interlocking kits connect two contactors so only one can be energized at a time, essential for reversing motor applications. Timer modules can be attached to add on-delay or off-delay functionality. DIN-rail mounting adapters and labeling strips simplify panel layout and identification during commissioning and maintenance.
- The coil voltage must match the control circuit voltage that will energize it. In most modern industrial panels, the control circuit operates at 24V DC (powered by the panel's DC power supply), making 24V DC coils the most common choice — they are compatible with PLC transistor outputs and offer quiet, bounce-free operation. For panels with AC control circuits, 120V AC and 240V AC coils are standard, and they are energized through relay outputs or pilot devices. When selecting coil voltage, consider the PLC output type — transistor (DC) outputs require DC coils, and relay outputs can drive either AC or DC coils. Also account for cumulative coil burden: each coil draws current from the control circuit power source, and panels with many contactors and relays may require a larger control transformer or DC supply to handle the total inrush and holding current of all coils.