How do I measure the flow rate of liquid, gas, or steam in a pipe?

Measuring flow rate in a pipe requires a flow meter matched to the fluid type, pipe size, flow range, and accuracy requirement. For conductive liquids (water, chemicals, slurries), magnetic flow meters are the most popular choice — they have no moving parts, create no pressure drop, and handle dirty or abrasive fluids. For non-conductive liquids or retrofit installations where you can't cut the pipe, clamp-on ultrasonic flow meters mount externally and measure through the pipe wall. For applications requiring the highest accuracy or mass flow measurement (batching, custody transfer), Coriolis meters measure mass flow directly. For steam and gas, vortex meters are robust and widely used. For simple, low-cost local visual indication of flow rate, variable-area meters (rotameters) provide a direct reading without power or electronics. Flow switches are used when you only need to confirm flow is present or absent — for example, verifying cooling water is running before allowing a machine to start. The flow meter output (typically 4–20 mA) feeds back to a PLC or controller for monitoring, totalization, or closed-loop flow control.

What are the most common types of flow meters and when is each used?

The flow meter technology must match the fluid type, pipe size, accuracy requirement, and process conditions. Magnetic (mag) flow meters measure conductive liquids (water, chemicals, slurries) using Faraday's law — they have no moving parts, handle dirty or abrasive fluids well, and are the default for water and wastewater applications. Ultrasonic flow meters (transit-time and Doppler) are non-intrusive and can be clamp-on, ideal for retrofit or applications where the pipe cannot be cut. Coriolis meters measure mass flow directly with very high accuracy — the premium choice for custody transfer, batching, and applications requiring density measurement. Vortex meters are robust and versatile for steam, gas, and liquid measurement in moderate-to-large pipe sizes. Variable-area meters (rotameters) provide simple, low-cost local visual indication of flow rate. Turbine meters offer high accuracy for clean, low-viscosity liquids. The best approach is to define the fluid properties, flow range, accuracy requirement, and installation constraints, then match to the technology that fits.

What is a flow switch and how is it different from a flow meter?

A flow switch detects whether flow is present or absent (or above/below a threshold) and outputs a discrete on/off signal — it does not measure the actual flow rate. Flow switches are used for protection and alarm functions: confirming cooling water is flowing before allowing a machine to operate, detecting loss of lubrication flow to trigger a shutdown, or verifying that a pump is actually moving fluid. They are simpler and less expensive than flow meters. A flow meter, by contrast, measures the actual flow rate (GPM, liters/minute, SCFM, etc.) and provides a continuous analog or digital output proportional to the flow value. Flow meters are used when the control system needs to know how much fluid is flowing — for batching, dosing, energy accounting, and closed-loop flow control. If you only need to know whether flow is on or off, a flow switch is sufficient. If you need to know how much, you need a flow meter.

What is a magnetic flow meter and what are its advantages?

A magnetic flow meter (mag meter) uses Faraday's law of electromagnetic induction to measure the velocity of a conductive liquid flowing through a pipe. The meter generates a magnetic field across the pipe, and the flowing conductive liquid produces a voltage proportional to its velocity — this voltage is measured by electrodes in the pipe wall and converted to a flow rate. Mag meters have several significant advantages: no moving parts (zero maintenance on the sensor itself), no obstruction to flow (full bore, no pressure drop), excellent performance with dirty, abrasive, and slurry-containing liquids, wide turndown ratios (typically 100:1 or greater), and bidirectional measurement capability. They are the standard choice for water and wastewater treatment, chemical processing, food and beverage, pharmaceutical, and pulp and paper applications. The main limitation is that the liquid must be electrically conductive (minimum ~5 µS/cm) — mag meters cannot measure hydrocarbons, deionized water, or gases.

How do I select the correct flow meter size for my application?

Flow meter sizing must balance accuracy, rangeability, and pressure drop. The meter should be sized so that the normal operating flow rate falls within the meter's optimal accuracy range — typically between 25% and 75% of its full-scale capacity. Sizing based solely on the pipe diameter is a common mistake — if the pipe is oversized for the actual flow rate (which is common in many installations), the flow velocity through the meter will be too low for accurate measurement. In these cases, the meter should be sized smaller than the pipe, with reducers and expanders installed to transition from the pipe size to the meter size. Key data needed for sizing includes the fluid type and properties (density, viscosity, conductivity, temperature, pressure), the minimum, normal, and maximum flow rates, the required accuracy, and the acceptable pressure drop. Most flow meter manufacturers provide online sizing tools where you input these parameters and receive a recommended meter size and model.

Flow Control - Stauff USA

Flow control products measure, monitor and regulate the movement of liquids and gases through a process. Accurate flow data helps you control dosing, track usage, protect pumps from running dry and confirm that coo...

Categories from Stauff USA (3)

Turbine Flow Meters

Turbine flow meters measure liquid flow by counting the rotation of a turbine rotor. They're accurate and responsive in clean, low-viscosity liquids such as water, fuels and light chemicals.

Turbine Meter Features

High accuracy – suitable for batching and blending
Wide turndown – broad flow range
Pulse and analog outputs – connect to totalizers and controls
Sanitary and stainless versions – food and chemical service

Installation Tips

Provide enough straight pipe upstream and downstream, and install a strainer to protect the rotor. Viscosity changes affect accuracy, so turbines suit consistent, clean fluids.

Centro supplies turbine flow meters for water, fuel and chemical measurement.

Hydraulic Accessories

Hydraulic accessories keep hydraulic systems clean, sealed and reliable. Filters and O-rings are small parts that prevent costly failures.

Accessories Available

Hydraulic filters – pressure, return and suction
Hydraulic O-rings – seals for fittings and components
Breathers – reservoir protection
Gauges – system monitoring

Maintenance Tips

Monitor filter indicators, replace seals during service and keep oil clean to extend component life.

Centro supplies hydraulic accessories.

Shop by type: Hydraulic Filters | Hydraulic O-Rings

Sight Flow Indicators

Sight flow indicators are essential instruments used to visually monitor the flow of liquids and gases in a pipeline or process system. These transparent or glass-tube indicators allow operators to observe the presence, color, clarity, and flow rate of fluids, ensuring smooth operations and providing valuable insights into the process. Sight flow indicators are commonly used in industries like chemical processing, petrochemicals, pharmaceuticals, and water treatment, where real-time flow observation is critical for safety, quality control, and troubleshooting. With a wide range of designs and materials available, sight flow indicators offer reliable and easy-to-use solutions for monitoring fluid flow and ensuring the efficiency of industrial processes.

Related categories: Flow Meters | Accessories and Parts | Ultrasonic Flow Meters | Water Meters | Gas Flow Meters

Filter

In Stock Only

Filter

25 items

Sort by:

content loaded

Compare

Flow Control - Stauff USA

Turbine Meter Features

Installation Tips

Accessories Available

Maintenance Tips

$5,140.04$5,586.99

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.40$5,587.39

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,976.07$6,495.72

$5,976.07$6,495.72

$5,976.07$6,495.72

$6,675.37$7,255.83

$572.59$622.37

$8,250.78$8,968.23

$8.41$9.14

$9.53$10.35

$14.74$16.02

$1,395.51$1,516.85

$1,500.56$1,631.04

$1,500.56$1,631.04

$2,073.11$2,253.37

$3,298.72$3,585.56

$5,140.04$5,586.99

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.40$5,587.39

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,140.39$5,587.37

$5,976.07$6,495.72

$5,976.07$6,495.72

$5,976.07$6,495.72

$6,675.37$7,255.83

$572.59$622.37

$8,250.78$8,968.23

$8.41$9.14

$9.53$10.35

$14.74$16.02

$1,395.51$1,516.85

$1,500.56$1,631.04

$1,500.56$1,631.04

$2,073.11$2,253.37

$3,298.72$3,585.56

Orders & purchases

Divisions