Filtration
Centro’s Filtration division helps businesses run smoothly by providing high-quality filtration solutions that remove contaminants, protect equipment, and improve product quality. Whether air or liquid filtr...
Categories in Filtration - Reliable Solutions for Clean and Efficient Processes (2)
Industrial Filtration
Industrial filtration protects equipment, workers, and customers from harmful contaminants, purifies air, gas, and water, and separates and isolates products. It is used in various processes, including membrane filtration, centrifugal filtration, gravity filtration, vacuum filtration, chill/cold filtration, hot filtration, multi-layer filtration, mechanical filtration, surface filtration, and depth filtration. Filters used in industrial applications include air filters, electronic filters, EMI/FRI filters, fluid filters, fuel filters, hydraulic filters, water filters, and carbon filters.
Commercial Filtration
Commercial filtration solutions prioritize ease of use, reliable performance, and regulatory compliance while handling moderate flow rates and contaminant loads. By removing impurities, odors, particulates, and harmful substances, commercial filtration improves health, protects equipment, and ensures a consistently pleasant environment for staff and customers.
Filter
Filter
21,568 items
content loaded
A genuine Clemco Big Clem Pro Ser, 160Cu. Ft., 4Operator Elec, Hwy.
$68,521.30$71,265.00
Available for Purchase
Subject to factory lead times
Available from Clemco: Big Clem Pro Ser, 160Cu. Ft., 4Operator Elec, Skid.
$52,993.08$55,115.00
Available for Purchase
Subject to factory lead times
The Clemco Blast Machine Classic Portable, 3 Cu. Ft., pr-hold, ACS.
$5,715.46$6,495.00
Available for Purchase
Subject to factory lead times
Clemco's Blast Machine Classic Stat, 10 Cu. Ft., pr-hold, ACS.
$8,095.80$9,200.00
Available for Purchase
Subject to factory lead times
Clemco's Blast Machine Classic Stat, 20 Cu. Ft., pr-hold, ACS.
$13,512.07$15,355.00
Available for Purchase
Subject to factory lead times
This is a Clemco Blast Machine Classic Sta, 10Cu. Ft. With MQV Pro, TLR.
$7,127.83$8,100.00
Available for Purchase
Subject to factory lead times
A genuine Clemco Blast Machine Classic Sta, 20Cu. Ft. With MQV Pro, TLR.
$12,869.68$14,625.00
Available for Purchase
Subject to factory lead times
A genuine Clemco Washer, NW-25.
$4.67$5.00
Available for Purchase
Subject to factory lead times
Available from Clemco: Washer, NW-32.
$4.67$5.00
Available for Purchase
Subject to factory lead times
Part number 80-1621 from Van Air Systems is a Cool Pak Pro - CPP-185. It is commonly found in painting, sandblasting, and pharmaceutical applications. Van Air Systems is recognized globally for engineering products that meet strict performance standards.
$7,850.16
Available for Purchase
Subject to factory lead times
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
$14,750.30
Available for Purchase
Subject to factory lead times
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
$18,950.38
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,222.80$7,435.08
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,222.80$7,435.08
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,673.27$7,898.79
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,511.97$7,732.75
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,673.27$7,898.79
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,511.97$7,732.75
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$8,124.14$8,362.91
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$8,124.14$8,362.91
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,962.85$8,196.88
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,962.85$8,196.88
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$9,591.19$9,873.08
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$9,752.27$10,038.90
Available for Purchase
Subject to factory lead times
A genuine Clemco Big Clem Pro Ser, 160Cu. Ft., 4Operator Elec, Hwy.
$68,521.30$71,265.00
Available for Purchase
Subject to factory lead times
Available from Clemco: Big Clem Pro Ser, 160Cu. Ft., 4Operator Elec, Skid.
$52,993.08$55,115.00
Available for Purchase
Subject to factory lead times
The Clemco Blast Machine Classic Portable, 3 Cu. Ft., pr-hold, ACS.
$5,715.46$6,495.00
Available for Purchase
Subject to factory lead times
Clemco's Blast Machine Classic Stat, 10 Cu. Ft., pr-hold, ACS.
$8,095.80$9,200.00
Available for Purchase
Subject to factory lead times
Clemco's Blast Machine Classic Stat, 20 Cu. Ft., pr-hold, ACS.
$13,512.07$15,355.00
Available for Purchase
Subject to factory lead times
This is a Clemco Blast Machine Classic Sta, 10Cu. Ft. With MQV Pro, TLR.
$7,127.83$8,100.00
Available for Purchase
Subject to factory lead times
A genuine Clemco Blast Machine Classic Sta, 20Cu. Ft. With MQV Pro, TLR.
$12,869.68$14,625.00
Available for Purchase
Subject to factory lead times
A genuine Clemco Washer, NW-25.
$4.67$5.00
Available for Purchase
Subject to factory lead times
Available from Clemco: Washer, NW-32.
$4.67$5.00
Available for Purchase
Subject to factory lead times
Part number 80-1621 from Van Air Systems is a Cool Pak Pro - CPP-185. It is commonly found in painting, sandblasting, and pharmaceutical applications. Van Air Systems is recognized globally for engineering products that meet strict performance standards.
$7,850.16
Available for Purchase
Subject to factory lead times
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
$14,750.30
Available for Purchase
Subject to factory lead times
Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained. Dry compressed air exits the top of the vessel. When used with Dry-O-Lite desiccant, the D-Series Compressed Air Dryer automatically provides a dew point that is approximately 20°F lower than temperature of the air at the vessel inlet. For example, if the air inlet temperature is 80°F, the D-series Dryer delivers a 60°F dew point. If the air inlet temperature is 50°F, the dryer delivers a 32°F dew point. Ideal for a wide range of applications, these compressed air dryers protect against freeze-ups in the winter and liquid in the summer. D-Series Compressed Air Dryers may be installed inside or outside, and with a pressure drop less than 1% of the operating pressure, they are ideal for low pressure applications. Also with no moving parts or electrical components, D-Series Compressed Air Dryers can be applied with confidence in dirty and hazardous locations. Features Manual drain valve (1" NPT) Two sight windows to check desiccant level Elliptical direct entry hatch cover Pressure relief coupling Vessels built and stamped to ASME code Epoxy interior coating Epoxy coated carbon steel bed support grid Primer and enamel exterior finish 10 year vessel warranty Applications Steel mills Saw mills Lumber yards Ready-mix concrete plants Asphalt plants Cement production Mining Digester gas and landfill gas General plant air for preventing airline condensation Dirty and hazardous environments Remote locations with limited or no electricity Downloads Brochure Manual Drawings
$18,950.38
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,222.80$7,435.08
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,222.80$7,435.08
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,673.27$7,898.79
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,511.97$7,732.75
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,673.27$7,898.79
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,511.97$7,732.75
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$8,124.14$8,362.91
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$8,124.14$8,362.91
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,962.85$8,196.88
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$7,962.85$8,196.88
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$9,591.19$9,873.08
Available for Purchase
Subject to factory lead times
Nordfab’s Quick-Fit® Automatic Diverter Valve offers a highly efficient, economical method of diverting the flow of material or air via automatic opening and closing. Contact Nordfab or your local Nordfab dealer for assistance with material / end type options.
$9,752.27$10,038.90
Available for Purchase
Subject to factory lead times
FAQS
- Industrial filtration is the process of removing unwanted contaminants — solid particles, liquids, gases, and biological material — from air, water, process fluids, and gas streams in manufacturing and processing facilities. It is important because contamination directly impacts product quality, equipment life, worker safety, and regulatory compliance. Without effective filtration, particulates damage pumps, valves, heat exchangers, and instrumentation; airborne dust creates explosion hazards and respiratory risks; and product contamination leads to batch rejection, customer complaints, and regulatory violations. Filtration technologies span a wide range — from simple Y-strainers that catch pipe debris to sub-micron cartridge filters that purify pharmaceutical-grade liquids, from bag filters handling high-volume process streams to coalescing filters that remove oil aerosols from compressed air. The right filtration strategy protects capital equipment, ensures product meets specification, keeps workers safe, and helps facilities comply with EPA, OSHA, FDA, and other regulatory requirements.
- Choosing the right filter starts with four questions: what are you filtering (liquid, gas, air, or steam), what contaminants are you removing (particles, oil, water, biological material), what particle size must be captured (measured in microns), and what flow rate and pressure does the system require? For liquid filtration, bag filters and cartridge filters are the primary options — bag filters handle higher flow rates and larger particle loads cost-effectively, while cartridge filters provide finer filtration down to sub-micron levels. For gas and compressed air filtration, particulate filters remove solid particles, coalescing filters remove oil and water aerosols, and adsorption filters remove oil vapor and odors. For pipeline protection, strainers (Y-strainers and basket strainers) are installed upstream of pumps, valves, and instruments to catch large debris. For airborne dust and particulate, dust collectors with cartridge or bag filtration media capture contaminants at the source. The operating environment, chemical compatibility, temperature, and regulatory requirements further narrow the selection to the correct filter type, media material, and housing configuration.
- A micron rating indicates the size of the smallest particles a filter is designed to capture, measured in micrometers (µm). One micron is one-millionth of a meter — for reference, a human hair is roughly 70 microns in diameter, and bacteria are typically 0.5 to 5 microns. Filters are available from coarse ratings (100–200 microns for large debris) down to sub-micron ratings (0.01–1 micron for fine particulate, oil aerosols, and biological contaminants). Selecting the right micron rating depends on what you are protecting downstream and the quality specification your process requires. A coarse strainer (40–100 microns) upstream of a pump protects the pump from pipe scale and debris. A 5–25 micron bag or cartridge filter in a process line removes visible particulates. A 1 micron or finer cartridge filter is needed for pharmaceutical, food and beverage, or electronics manufacturing applications where product purity standards are stringent. Also consider whether you need a nominal rating (captures a percentage of particles at the stated size) or an absolute rating (captures virtually all particles at the stated size) — absolute-rated filters provide higher assurance for critical applications.
- Filter replacement or cleaning frequency depends on the contaminant load, flow rate, filter type, and how you monitor filter condition. The most reliable indicator is differential pressure — the pressure drop across the filter measured between the inlet and outlet. A clean filter has a low differential pressure; as the filter captures contaminants, the media becomes increasingly restricted and the differential pressure rises. Most filter housings include differential pressure gauges or ports for gauges. When the differential pressure reaches the manufacturer's recommended maximum (typically 15–35 psi for liquid filters, 2–10 psi for gas filters), the filter element should be replaced or cleaned. Operating beyond the maximum differential pressure risks filter bypass, media collapse, or contaminant breakthrough. In practice, many facilities establish a time-based replacement schedule as a baseline (monthly, quarterly, or semi-annually depending on conditions) and supplement it with differential pressure monitoring. Applications with highly variable contaminant loads benefit most from continuous differential pressure monitoring with alarms set at warning and change-out thresholds.