Flow Control
Flow control products measure, monitor and regulate the movement of liquids and gases through a process. Accurate flow data helps you control dosing, track usage, protect pumps from running dry and confirm that coo...
Flow meters measure the rate and total volume of liquids and gases moving through pipes and channels. Accurate flow data supports billing, batching, process control and efficiency improvements.
Flow Meter Types
- Magnetic flow meters – conductive liquids with no moving parts
- Turbine flow meters – clean, low-viscosity liquids
- Positive displacement meters – viscous fluids
- Thermal mass meters – gas flow
- Rotameters – simple visual indication
- Open channel and anemometer meters – water channels and airflow
Choosing a Flow Meter
The fluid, flow range, accuracy, pipe size and installation constraints decide the technology. Consider pressure drop, straight-run needs and output signals.
Centro can help you select flow meters for your fluid and application.
Shop by type: Anemometer Flow Meters | Magnetic Flow Meters | Turbine Flow Meters | Roto Meters | Thermal Flow Meters | Visual Flow Meters
Related categories: Flow Control | Flow Transmitters | Flow Sensors | Flow Switches | Flow Control Accessories
Flow switches monitor liquid or air flow and trigger alarms or shutdowns when flow is too low or too high. They protect pumps, heat exchangers, chillers and cooling systems.
Flow Switch Types
- Paddle flow switches – simple, rugged
- Thermal flow switches – no moving parts
- Piston and magnetic flow switches – precise set points
- Air flow switches – ducts and HVAC
Choosing a Switch
Select by media, flow range, pipe size, pressure and temperature. Adjustable set points add flexibility.
Centro supplies flow switches.
Related categories: Flow Control | Flow Transmitters | Flow Meters | Flow Sensors | Flow Control Accessories
Flow transmitters convert flow measurements into standard signals for control systems, so you can monitor, control and record flow remotely.
Transmitter Options
- 4-20 mA and HART outputs – standard integration
- Pulse outputs – totalizing and batching
- Digital communication – Modbus and Ethernet
- Remote and integral mounting – suit installation
Choosing a Transmitter
Match the transmitter to the sensor or meter type and output required. Consider display, power and hazardous area ratings.
Centro supplies flow transmitters for process monitoring.
Related categories: Flow Control | Flow Switches | Flow Meters | Flow Sensors | Flow Control Accessories
Flow sensors detect and measure the movement of liquids and gases in a pipe or duct. They protect pumps from running dry, confirm cooling flow to machines and give your control system the feedback it needs.
Flow Sensor Technologies
- Thermal flow sensors – no moving parts, suitable for water, oil and air
- Paddle and vane sensors – simple, rugged flow detection
- Magnetic inductive sensors – for conductive liquids
- Ultrasonic clamp-on sensors – non-invasive measurement on existing pipe
- Vortex sensors – steam, gas and liquid applications
Choosing a Sensor
Consider the media, flow range, pipe size, temperature and pressure, and whether you need a switching point, a continuous analog signal or both. IO-Link sensors provide extra diagnostics. Follow the straight-run requirements for accurate readings.
Centro offers flow sensors for machine cooling, process monitoring and pump protection.
Related categories: Flow Control | Flow Meters | Flow Control Accessories | Flow Transmitters | Flow, pH & Conductivity Meters, Transmitters & Controllers
We offer a wide range of flow, pH, and conductivity meters, transmitters, and controllers to meet the demands of various industrial and commercial applications. From monitoring flow rates and maintaining chemical balance for fluid quality and consistency, our solutions are engineered for precision, reliability, and seamless integration. We provide products such as magnetic and ultrasonic flow meters, pH controllers, and conductivity transmitters designed to optimize performance in industries like water treatment, food and beverage, chemical processing, and pharmaceuticals.
Whether you need accurate measurements, durable equipment, or easy system integration, we have the expertise and products to support your operations. Explore our selection online or contact our team to find the right solution for your application and ensure peak system efficiency.
Related categories: Flow Control | Flow Control Accessories | Flow Sensors | Flow Meters | Flow Transmitters
Flow control accessories complete a flow measurement installation. Fittings, adapters, displays, cables and mounting hardware help your meters and sensors install correctly and read accurately.
Accessories Available
- Insertion fittings and saddles – mount sensors in pipe
- Flow conditioners and straighteners – reduce the straight-run piping needed
- Remote displays and totalizers – read flow away from the meter
- Cables and connectors – connect sensors to controllers
- Grounding rings and gaskets – for magnetic flow meters
Selecting Accessories
Accessories are often specific to a meter brand and model, so start with your meter's part number and pipe size. Grounding rings are needed on mag meters installed in plastic or lined pipe. Flow conditioners help where piping doesn't allow enough straight run.
Centro can match flow control accessories to your existing meters and installation.
Related categories: Flow Control | Flow Sensors | Flow, pH & Conductivity Meters, Transmitters & Controllers | Flow Meters | Flow Transmitters
$222.84
Subject to factory lead times
$27.94
Subject to factory lead times
$114.73
Subject to factory lead times
$115.18
Subject to factory lead times
$44.45
Subject to factory lead times
$133.79
Subject to factory lead times
$122.34
Subject to factory lead times
$113.97
Subject to factory lead times
$252.90
Subject to factory lead times
$93.83
Subject to factory lead times
$76.23
Subject to factory lead times
$473.80
Subject to factory lead times
$865.15
Subject to factory lead times
$255.22
Subject to factory lead times
$111.13
Subject to factory lead times
$2,204.28
Subject to factory lead times
$147.61
Subject to factory lead times
$284.42
Subject to factory lead times
$46.77
Subject to factory lead times
$24.81
Subject to factory lead times
$198.35
Subject to factory lead times
$105.21
Subject to factory lead times
$209.55
Subject to factory lead times
$277.46
Subject to factory lead times
$222.84
Subject to factory lead times
$27.94
Subject to factory lead times
$114.73
Subject to factory lead times
$115.18
Subject to factory lead times
$44.45
Subject to factory lead times
$133.79
Subject to factory lead times
$122.34
Subject to factory lead times
$113.97
Subject to factory lead times
$252.90
Subject to factory lead times
$93.83
Subject to factory lead times
$76.23
Subject to factory lead times
$473.80
Subject to factory lead times
$865.15
Subject to factory lead times
$255.22
Subject to factory lead times
$111.13
Subject to factory lead times
$2,204.28
Subject to factory lead times
$147.61
Subject to factory lead times
$284.42
Subject to factory lead times
$46.77
Subject to factory lead times
$24.81
Subject to factory lead times
$198.35
Subject to factory lead times
$105.21
Subject to factory lead times
$209.55
Subject to factory lead times
$277.46
Subject to factory lead times
- Measuring flow rate in a pipe requires a flow meter matched to the fluid type, pipe size, flow range, and accuracy requirement. For conductive liquids (water, chemicals, slurries), magnetic flow meters are the most popular choice — they have no moving parts, create no pressure drop, and handle dirty or abrasive fluids. For non-conductive liquids or retrofit installations where you can't cut the pipe, clamp-on ultrasonic flow meters mount externally and measure through the pipe wall. For applications requiring the highest accuracy or mass flow measurement (batching, custody transfer), Coriolis meters measure mass flow directly. For steam and gas, vortex meters are robust and widely used. For simple, low-cost local visual indication of flow rate, variable-area meters (rotameters) provide a direct reading without power or electronics. Flow switches are used when you only need to confirm flow is present or absent — for example, verifying cooling water is running before allowing a machine to start. The flow meter output (typically 4–20 mA) feeds back to a PLC or controller for monitoring, totalization, or closed-loop flow control.
- The flow meter technology must match the fluid type, pipe size, accuracy requirement, and process conditions. Magnetic (mag) flow meters measure conductive liquids (water, chemicals, slurries) using Faraday's law — they have no moving parts, handle dirty or abrasive fluids well, and are the default for water and wastewater applications. Ultrasonic flow meters (transit-time and Doppler) are non-intrusive and can be clamp-on, ideal for retrofit or applications where the pipe cannot be cut. Coriolis meters measure mass flow directly with very high accuracy — the premium choice for custody transfer, batching, and applications requiring density measurement. Vortex meters are robust and versatile for steam, gas, and liquid measurement in moderate-to-large pipe sizes. Variable-area meters (rotameters) provide simple, low-cost local visual indication of flow rate. Turbine meters offer high accuracy for clean, low-viscosity liquids. The best approach is to define the fluid properties, flow range, accuracy requirement, and installation constraints, then match to the technology that fits.
- A flow switch detects whether flow is present or absent (or above/below a threshold) and outputs a discrete on/off signal — it does not measure the actual flow rate. Flow switches are used for protection and alarm functions: confirming cooling water is flowing before allowing a machine to operate, detecting loss of lubrication flow to trigger a shutdown, or verifying that a pump is actually moving fluid. They are simpler and less expensive than flow meters. A flow meter, by contrast, measures the actual flow rate (GPM, liters/minute, SCFM, etc.) and provides a continuous analog or digital output proportional to the flow value. Flow meters are used when the control system needs to know how much fluid is flowing — for batching, dosing, energy accounting, and closed-loop flow control. If you only need to know whether flow is on or off, a flow switch is sufficient. If you need to know how much, you need a flow meter.
- A magnetic flow meter (mag meter) uses Faraday's law of electromagnetic induction to measure the velocity of a conductive liquid flowing through a pipe. The meter generates a magnetic field across the pipe, and the flowing conductive liquid produces a voltage proportional to its velocity — this voltage is measured by electrodes in the pipe wall and converted to a flow rate. Mag meters have several significant advantages: no moving parts (zero maintenance on the sensor itself), no obstruction to flow (full bore, no pressure drop), excellent performance with dirty, abrasive, and slurry-containing liquids, wide turndown ratios (typically 100:1 or greater), and bidirectional measurement capability. They are the standard choice for water and wastewater treatment, chemical processing, food and beverage, pharmaceutical, and pulp and paper applications. The main limitation is that the liquid must be electrically conductive (minimum ~5 µS/cm) — mag meters cannot measure hydrocarbons, deionized water, or gases.
- Flow meter sizing must balance accuracy, rangeability, and pressure drop. The meter should be sized so that the normal operating flow rate falls within the meter's optimal accuracy range — typically between 25% and 75% of its full-scale capacity. Sizing based solely on the pipe diameter is a common mistake — if the pipe is oversized for the actual flow rate (which is common in many installations), the flow velocity through the meter will be too low for accurate measurement. In these cases, the meter should be sized smaller than the pipe, with reducers and expanders installed to transition from the pipe size to the meter size. Key data needed for sizing includes the fluid type and properties (density, viscosity, conductivity, temperature, pressure), the minimum, normal, and maximum flow rates, the required accuracy, and the acceptable pressure drop. Most flow meter manufacturers provide online sizing tools where you input these parameters and receive a recommended meter size and model.





