content loaded
Image may not be the actual product. Please refer to the full technical specs and MPN for exact details.
Typically ships within 2-4 weeks
Can I get this faster?
Subject to factory lead times
Option to use your account at checkout
$453.71
QTY:
Typically ships within 2-4 weeks
Can I get this faster?
Subject to factory lead times
Option to use your account at checkout
$453.71
QTY:
Our experts are here to help.
Call (866) 703-5665 for Expedited Shipping, Delivery Date, Product Questions & Help
Our experts are here to help.
Call (866) 703-5665 for Expedited Shipping, Delivery Date, Product Questions & Help
Attributes:View Additional Documents
| Ambient Temperature: | -10 °C | IP Rating: | 67 | Operating pressure: | 10 Bar |
| Operating temperature: | 2 Bar | Weight: | 0.2 kg |
Overview:
Pressure maintenance valve with air bleed screw SDV-P, Size: 07, Manual quick ventilation - SDV-P 07-EFeatures:
- Housing material - The SDV-P-E and SDV-P-E-P variants are equipped with manual quick-release ventilation. They allow venting the connected actuators without having to remove the pneumatic hoses (for example, During set-up or before restarting the system after an emergency stop).
- Manual quick ventilation - Describes the pressure loss between input and output pressure through the spring-actuated check valves. This pressure loss may have to be taken into account when the connected actuators are configured.
- Warranty - pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
- Actuation - Aluminum
- Rate of flow - For the SDV-P and SDV-P-E variants, the possible volume of flow through the valve depends on the used pneumatic hoses. The table shows the flow rate according to the used pneumatic hose (reference pressure 6 bar).
- Valve switching time - The diameter refers to the outer diameter of the hose. The relevant inner diameter can be slightly different depending on the manufacturer and minimally affect the values. The SDV-P-E-P variant does not have hose-dependent flow rates
- Pressure loss, input / output - purely the switching time of the SDV-P valve without other loads. Valve switching times must be added to the movement times on the load side, such as the opening and closing times of the respective gripper.
"Our mission is to be regarded by our customers and our community as the best supplier of automation and control product solutions to industry."
Michael R Gallagher
Centro President
QTY: