content loaded

Overview:

Gripper for small components EGP, Size: 25, electrical, in Speed-Version, Communication interface: Digital inputs - EGP 25-N-S-B

Features:

  • Scope of delivery - Accessory kit for centering sleeves, bracket for proximity switch, assembly instructions.
  • Housing material - Aluminum alloy, coated
  • Repeat accuracy (gripping) - defined as the spread of the actual position at 100 consecutive closing or opening movements on a rigid workpiece or a fixed workpiece stop under constant conditions.
  • Repeat accuracy (positioning, bi-directional) - defined as the spread of the actual position of the base jaws after 100 consecutive movements to a target position from both directions under constant conditions.
  • Finger length - is measured from the reference surface as the distance P in direction to the main axis.
  • Repeat accuracy (positioning, unidirectional) - defined as the spread of the actual position of the base jaws after 100 consecutive movements to a target position from the same direction under constant conditions.
  • Warranty - 24 months
  • Closing and opening times - are purely the times that the base jaws or fingers are in motion. PLC reaction times are not included in the above-mentioned times and must be taken into consideration when determining cycle times.
  • Gripping force - is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
  • Actuation - servo-electric, via brushless DC servomotor
  • Workpiece weight - is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
  • Base jaw material - Steel
  • Service life characteristics - on request
  • Operating principle - Rack and pinion principle

"Our mission is to be regarded by our customers and our community as the best supplier of automation and control product solutions to industry."

Michael R Gallagher

Centro President

QTY: