content loaded
Image may not be the actual product. Please refer to the full technical specs and MPN for exact details.
Typically ships within 2-4 weeks
Can I get this faster?
Subject to factory lead times
Option to use your account at checkout
$1,246.44
QTY:
Typically ships within 2-4 weeks
Can I get this faster?
Subject to factory lead times
Option to use your account at checkout
$1,246.44
QTY:
Our experts are here to help.
Call (866) 703-5665 for Expedited Shipping, Delivery Date, Product Questions & Help
Our experts are here to help.
Call (866) 703-5665 for Expedited Shipping, Delivery Date, Product Questions & Help
Attributes:View Additional Documents
| Ambient Temperature: | 5 °C | Height: | 66.7 mm | IP Rating: | 40 |
| Length: | 50 mm | Operating pressure: | 6 Bar | Operating temperature: | 3 Bar |
| Weight: | 0.3 kg |
Overview:
Angular parallel gripper GAP, Size: 20, pneumatic - GAP 20-090Features:
- Housing material - Positively driven toggle-joint kinematics
- Repeat accuracy - The maximum permissible finger length applies until the nominal operating pressure is achieved. With higher pressures, the finger length must be reduced proportionally to the nominal operating pressure.
- Scope of delivery - on request
- Finger length - is measured from the reference surface as the distance P in direction to the main axis.
- Service life characteristics - 24 months
- Gripping force maintenance device - Centering sleeves, O-rings for direct connection, assembly instructions (operating manual with declaration of incorporation is available online)
- Gripping force - is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
- Workpiece weight - is defined as a distribution of the end Position for 100 consecutive strokes.
- Warranty - pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
- Closing and opening times - is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
- Base jaw material - Aluminum alloy, anodized
- Operating principle - are purely the times that the base jaws or fingers are in motion. Valve switching times, hose fill times, or PLC reaction times are not included, and are to be considered when cycle times are calculated.
- Actuation - Steel
"Our mission is to be regarded by our customers and our community as the best supplier of automation and control product solutions to industry."
Michael R Gallagher
Centro President
QTY: