Pneumatic and Electronic Controls - ControlAir
We provide various products, including valves, motion control, electrical enclosures, HMIs, power tools, and electric control systems. In addition to these products, we offer compressed air products to power pneuma...
Categories from ControlAir (2)
Control Relays
Control relays are electrical devices that control and switch electrical circuits in industrial automation and control systems. These relays act as electromechanical switches, allowing a low-power control signal to control a higher-power circuit. Control relays are commonly used to control motors, solenoids, lights, and other electrical loads. They provide reliable and efficient control by isolating the control circuit from the higher-voltage or higher-current circuits. Control relays are available in various configurations, such as electromechanical and solid-state relays, offering different features and capabilities. They play a crucial role in automating processes, ensuring proper sequencing, and enhancing the safety and reliability of control systems.
Related categories: Motor Control | Soft Starters | Contactors | Motor Control Parts | Manual Starters
Rotary Actuators
Rotary actuators turn air or electric power into rotation for turning, indexing, flipping and operating valves. They're common in automation for rotating parts, opening gates and positioning tools.
Rotary Actuator Types
- Rack and pinion – precise angles and high torque
- Vane actuators – compact and lightweight
- Rotary tables – handle offset loads
- Electric rotary actuators – programmable positions
Choosing an Actuator
Calculate torque from load and inertia, select rotation angle and consider cushioning for smooth stops. Position sensors confirm end points.
Centro supplies rotary actuators for automation and valve control.
Related categories: Pneumatic Cylinders and Actuators | Linear Cylinders | Pneumatic Cylinder | Clamps | Electric Linear Actuator
Filter
Filter
346 items
content loaded
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$288.92
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$189.60
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$213.30
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$213.30
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$245.77
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$189.60
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$222.06
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$256.46
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$280.17
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$312.63
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$256.46
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$280.17
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$312.63
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$256.46
Available for Purchase
Subject to factory lead times
The Type 600 CCXZ ratio relay volume booster is designed to use a pneumatic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$295.16
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$288.92
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$256.46
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$280.17
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$280.17
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$288.92
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$222.36
In Stock (7)Ships within 1 business day
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$246.07
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$278.53
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$222.36
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$288.92
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$189.60
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$213.30
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$213.30
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$245.77
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$189.60
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$222.06
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$256.46
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$280.17
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$312.63
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$256.46
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$280.17
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$312.63
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$256.46
Available for Purchase
Subject to factory lead times
The Type 600 CCXZ ratio relay volume booster is designed to use a pneumatic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$295.16
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$288.92
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$256.46
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$280.17
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$280.17
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$288.92
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$222.36
In Stock (7)Ships within 1 business day
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$246.07
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$278.53
Available for Purchase
Subject to factory lead times
The Type 600 ratio relay volume booster is designed to use a pnuematic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type 600 relays up to 50 scfm (1,400 Nl/min) flow capacity to a final control element such as a valve actuator. The standard signal to output ratio is 1:1, however, the Type 600 is also available with an amplified ratio of 1:2, 1:3 and 1:6.
$222.36
Available for Purchase
Subject to factory lead times
FAQS
- Selecting the right pneumatic cylinder starts with defining the four core parameters of your application. Define four core parameters: bore size (force output = pressure × piston area, plus a 25–50% safety factor), stroke length (match to required travel, avoid excess), mounting style (fixed, flange, or pivot to suit your mechanical arrangement), and environment (standard, washdown, or food-grade seals). Speed is controlled by external flow valves, not cylinder selection. For precise positioning, consider a guided or rodless cylinder with position sensing rather than a standard unit.
- A soft starter ramps voltage at startup to limit inrush current and reduce mechanical shock, then steps aside once the motor reaches full speed. Use one when smooth starting is your only requirement. A VFD controls motor speed continuously throughout operation, making it the right choice whenever the process needs variable speed — conveyors, pumps, fans — and it delivers significant energy savings in centrifugal applications. If you only need a gentle start, use a soft starter. If you need speed control at any point during operation, invest in a VFD.
- PLCs are purpose-built for industrial environments — they tolerate heat, vibration, and electrical noise while executing control logic in deterministic millisecond scan cycles. They replace hardwired relay logic with reprogrammable software, making process changes fast and inexpensive. Built-in diagnostics centralize fault visibility and cut troubleshooting time. Modern PLCs integrate with HMIs, SCADA, and enterprise networks via standard protocols, enabling real-time data collection. Modular architecture means the system scales as the application grows.
- Start with the NEMA or IP rating: NEMA 1 for basic indoor use, NEMA 4/4X for washdown and outdoor exposure (4X adds corrosion resistance), NEMA 7/9 for hazardous classified locations. Size the enclosure with 20–30% spare interior space for future additions and adequate heat dissipation. Choose material based on environment — painted steel for standard indoor use, stainless for washdown or chemical exposure, fiberglass for highly corrosive areas. Verify any required certifications (UL, CSA, ATEX) before specifying.
- Solenoid valves are electrically actuated and can be triggered instantly by a PLC or control system, making them essential for automated, repeatable, or high-cycle applications. Manual directional control valves require a person to physically shift the valve and are appropriate for infrequent operations, manual overrides, or applications with no control system. In practice, most automated systems use solenoid valves for normal operation with a manual override built in for setup, maintenance, and emergency use. If the valve must respond to a signal, cycle repeatedly, or operate unattended, solenoid is the correct choice.