Pneumatic and Electronic Controls - Eaton
We provide various products, including valves, motion control, electrical enclosures, HMIs, power tools, and electric control systems. In addition to these products, we offer compressed air products to power pneuma...
Control accessories complete push buttons, selector switches and pilot devices on control panels. Contact blocks, legend plates, guards and enclosures let you configure operator controls for each machine.
Accessories Available
- Contact blocks – normally open and normally closed
- Legend plates – clear function labeling
- Protective guards and boots – prevent accidental operation
- Push button enclosures – remote and pendant stations
- LED lamp modules – illuminated devices
Choosing Accessories
Accessories are series-specific, so match them to your operator brand and size (22 mm or 30 mm). Use standardized colors and legends for safety.
Centro supplies control accessories for operator devices.
Related categories: Electrical Control | Lighting Contactors | Control Contactors | Indicator Lights | Miniature Contactor Accessories
Circuit protection devices protect people, equipment and wiring from overloads, short circuits and faults. Choosing the right device is critical for safety and code compliance.
Circuit Protection Products
- Circuit breakers – miniature and molded case breakers
- Fuses and fuse blocks – fast and time-delay protection
- Disconnect switches – isolate equipment for safe service
- Breaker and disconnect accessories – handles, contacts and trips
- Breaker conversion kits – modernize older equipment
Choosing Protection
Size protection to the load and conductor rating, and confirm interrupting ratings meet available fault current. Follow NEC and UL requirements. Selective coordination helps keep faults isolated.
Centro supplies circuit protection devices from leading electrical brands.
Shop by type: Circuit Breaker Accessories | Disconnect Accessories | Circuit Breakers | Fuses | Fuse Blocks and Holders | Disconnect Switches | Circuit Monitoring
Related categories: Pneumatic and Electronic Controls | Electrical Accessories | Standard Power Supplies | Motor Control
$8.80
$8.64
$10.60
$10.02
$9.33
$10.27
Subject to factory lead times
$10.92
$11.90
$13.13
$10.59
$8.80
$8.64
$10.60
$10.02
$9.33
$10.27
Subject to factory lead times
$10.92
$11.90
$13.13
$10.59
- Selecting the right pneumatic cylinder starts with defining the four core parameters of your application. Define four core parameters: bore size (force output = pressure × piston area, plus a 25–50% safety factor), stroke length (match to required travel, avoid excess), mounting style (fixed, flange, or pivot to suit your mechanical arrangement), and environment (standard, washdown, or food-grade seals). Speed is controlled by external flow valves, not cylinder selection. For precise positioning, consider a guided or rodless cylinder with position sensing rather than a standard unit.
- A soft starter ramps voltage at startup to limit inrush current and reduce mechanical shock, then steps aside once the motor reaches full speed. Use one when smooth starting is your only requirement. A VFD controls motor speed continuously throughout operation, making it the right choice whenever the process needs variable speed — conveyors, pumps, fans — and it delivers significant energy savings in centrifugal applications. If you only need a gentle start, use a soft starter. If you need speed control at any point during operation, invest in a VFD.
- PLCs are purpose-built for industrial environments — they tolerate heat, vibration, and electrical noise while executing control logic in deterministic millisecond scan cycles. They replace hardwired relay logic with reprogrammable software, making process changes fast and inexpensive. Built-in diagnostics centralize fault visibility and cut troubleshooting time. Modern PLCs integrate with HMIs, SCADA, and enterprise networks via standard protocols, enabling real-time data collection. Modular architecture means the system scales as the application grows.
- Start with the NEMA or IP rating: NEMA 1 for basic indoor use, NEMA 4/4X for washdown and outdoor exposure (4X adds corrosion resistance), NEMA 7/9 for hazardous classified locations. Size the enclosure with 20–30% spare interior space for future additions and adequate heat dissipation. Choose material based on environment — painted steel for standard indoor use, stainless for washdown or chemical exposure, fiberglass for highly corrosive areas. Verify any required certifications (UL, CSA, ATEX) before specifying.
- Solenoid valves are electrically actuated and can be triggered instantly by a PLC or control system, making them essential for automated, repeatable, or high-cycle applications. Manual directional control valves require a person to physically shift the valve and are appropriate for infrequent operations, manual overrides, or applications with no control system. In practice, most automated systems use solenoid valves for normal operation with a manual override built in for setup, maintenance, and emergency use. If the valve must respond to a signal, cycle repeatedly, or operate unattended, solenoid is the correct choice.