PVF - Gyrolok
When it comes to instrumentation systems, precision and reliability are key. Pipes, valves, and fittings (PVF) are critical in maintaining accurate measurements, controlling pressure, and ensuring smooth operation ...
Categories from Gyrolok (1)
Instrument/Compression Fittings
Compression fittings are used in a variety of industries for a multitude of applications. Compression fittings are most commonly used in applications where copper or brass tubing is inserted into the fitting. The ferrule then compresses the tubing, creating a watertight seal. Compression fittings can be found in everything from plumbing and refrigeration to automotive and aerospace applications. Our team is proud to offer a wide variety of compression fittings, ensuring that you'll find the perfect solution for your needs. Centro carries instrument and compression tube fittings in stainless steel and brass, along with tubing, valves and adapters to complete your instrument lines. Please browse our website to learn more about our products and services.
Related categories: Instrumentation, Measurement and Control | Sensors | Recorders | Analytical Tools | Controllers
Filter
Filter
5 items
content loaded
Gyrolok FEMALE CONNECTOR;1/4 COMPRESSION X 1/4 FP
Requires Quote
Should ship between 27 Nov and 11 Dec
Subject to factory lead times
Gyrolok PLUG;3/8 FITTING PLUG 316SS
$14.11
In Stock (6)Ships within 1 business day
Gyrolok UNION TEE;3/8 COMPRESSION TEE 316S
Requires Quote
In Stock (20)Ships within 1 business day
Gyrolok MALE CONNECTOR;1/2 COMPRESSION X 3/8 MP
$33.93
In Stock (10)Ships within 1 business day
Gyrolok MALE CONNECTOR;1/2 COMPRESSION X 1/2 MP
$37.18
In Stock (13)Ships within 1 business day
Gyrolok FEMALE CONNECTOR;1/4 COMPRESSION X 1/4 FP
Requires Quote
Should ship between 27 Nov and 11 Dec
Subject to factory lead times
Gyrolok PLUG;3/8 FITTING PLUG 316SS
$14.11
In Stock (6)Ships within 1 business day
Gyrolok UNION TEE;3/8 COMPRESSION TEE 316S
Requires Quote
In Stock (20)Ships within 1 business day
Gyrolok MALE CONNECTOR;1/2 COMPRESSION X 3/8 MP
$33.93
In Stock (10)Ships within 1 business day
Gyrolok MALE CONNECTOR;1/2 COMPRESSION X 1/2 MP
$37.18
In Stock (13)Ships within 1 business day
FAQS
- PVF stands for Pipes, Valves, and Fittings — the fundamental piping components that make up the physical infrastructure of any instrumentation and process control system. Pipes transport fluids (liquids, gases, steam) between equipment, valves control and isolate the flow, and fittings connect everything together with leak-tight joints. In instrumentation systems specifically, PVF components connect sensors, transmitters, gauges, and analyzers to the process — every pressure gauge needs a pipe connection, every flow meter sits in a pipeline, and every level transmitter connects through fittings. Proper PVF selection ensures system integrity, accurate measurements, and safe operation. Material selection (carbon steel, stainless steel, PVC, CPVC, brass) must match the process fluid, temperature, and pressure to prevent corrosion, leaks, and failures.
- Pipe material selection depends on the fluid being transported, the operating temperature and pressure, corrosion considerations, and code requirements. Carbon steel is the workhorse for general industrial service — steam, compressed air, water, and non-corrosive process fluids at moderate to high temperatures and pressures. Stainless steel (304 and 316) handles corrosive chemicals, food-grade and pharmaceutical applications, and high-temperature service where carbon steel would corrode. PVC and CPVC are lightweight, corrosion-resistant options for water treatment, chemical processing, and plumbing applications at lower temperatures and pressures (PVC up to about 140°F, CPVC up to about 200°F). Brass is used for potable water, compressed air, and general low-pressure applications. For highly corrosive environments, specialty plastics like PVDF or lined pipe (PTFE-lined steel) may be required. Always verify that the pipe's pressure and temperature ratings meet your process conditions with an appropriate safety margin, and ensure the material is compatible with all chemicals it will contact.
- Pipe fittings connect, redirect, branch, and transition pipe runs to create complete piping systems. Common types include elbows (90° and 45° — change the direction of the pipe run), tees (create a branch connection from the main line), reducers (transition between two different pipe sizes — concentric for vertical runs, eccentric to maintain a flat bottom in horizontal runs), couplings and unions (join two pipes together — unions allow easy disconnection for maintenance), caps and plugs (close off open pipe ends), bushings (reduce the size of a threaded connection), and flanges (bolted connections that allow pipes, valves, and equipment to be connected and disconnected for maintenance). Fittings come in threaded (NPT — screwed together), socket weld (inserted and welded), butt weld (welded end-to-end for the strongest, most leak-proof joint), and grooved (mechanically coupled) configurations, each suited to different pressure ratings, pipe sizes, and maintenance requirements.
- Threaded (NPT) connections use tapered pipe threads sealed with thread sealant tape or compound. They are easy to assemble and disassemble without special tools, making them the standard for small-bore piping (typically 2" and under) in low-to-moderate pressure applications. Limitations include potential leak paths at the thread joint and reduced strength compared to welded connections. Socket weld connections use a fitting with a recessed socket — the pipe is inserted into the socket and a fillet weld is applied around the outside. Socket welds are stronger than threaded connections and are used for small-bore, high-pressure applications (instrument tubing, steam piping, hydraulic lines). Butt weld connections join two pipe ends directly together with a full-penetration weld — this is the strongest and most leak-proof joint type, used for larger pipe sizes and critical high-pressure, high-temperature applications. Butt weld joints require more skill and time to install but provide the best structural integrity and are required by most piping codes for high-pressure service.
- Leak prevention starts with proper specification and installation practices. For threaded connections, use the correct thread sealant (PTFE tape or pipe dope rated for the fluid and temperature), apply it properly (wrap tape in the direction of the threads, use the right number of wraps), and tighten to the correct engagement depth without overtightening (which can crack fittings). For flanged connections, select the correct gasket material for the fluid and temperature (spiral wound for high-pressure/high-temperature, PTFE for chemical service, rubber for water), ensure the flange faces are clean and undamaged, and torque the bolts evenly in a star pattern to the specified values to achieve uniform gasket compression. For compression fittings on instrument tubing, follow the manufacturer's exact assembly instructions — the number of turns past finger-tight is critical. For welded joints, ensure qualified welders and proper weld procedures are used. After assembly, pressure test the system per the applicable piping code before putting it into service. Implement a regular inspection program — walking the lines and checking for drips, stains, or corrosion at connection points.