Ducting
Ducting carries dust, fumes and particulate from the point where they're generated to your dust collector. Good duct design keeps air velocity high enough to hold dust in suspension, which prevents buildup, keeps hoods working and protects workers.
Ducting Components
- Quick-fit clamp-together duct – modular, easy to reconfigure and expand
- Spiral and welded duct – permanent systems for heavy dust loads
- Elbows, branches and reducers – smooth transitions that limit pressure loss
- Blast gates and dampers – balance airflow between drops
- Flexible hose and hoods – capture dust at the source
Design Considerations
Size ducts to keep the right conveying velocity for your dust, typically 3,500 to 4,500 feet per minute for most industrial dusts. Use long-radius elbows and 30° or 45° branch entries to cut losses. For combustible dust, include grounding, explosion isolation and NFPA-compliant design.
Centro can help you lay out dust collection ducting matched to your collector and production equipment.
Related categories: Dust Filtration | Collectors | Dust Filtration Cartridges | Bags and Cages | Vents
Filter
Filter
10,438 items
content loaded
Nordfab Quick-Fit® Y Branches (sometimes called “true wyes”) are standard with QF rolled ends, allowing quick connections with other QF ductwork. These Y shape branches are also available with a 90º angle between the legs. 14 gauge material construction adds extra durability and the solid welded seams eliminate leakage. Elimination of air leakage makes a dust collection system more efficient, providing savings on energy costs. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$949.96$977.88
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$456.88$470.30
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$456.88$470.30
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$456.88$470.30
Available for Purchase
Subject to factory lead times
Nordfab Duct Branches in Y shape (sometimes called “true wyes” or "breeches" branches) are standard 60º between legs, optional 90º. Flanged Y Branches are standard with industry-standard Angle Flanges on both ends, the flanges are retained via a vanstone lip so that bolt holes can easily be aligned with those on existing flanged connections. When ordering, specify A, B, C. Both B & C each must be at least 50% of A, with B or C being at least 80% of the opposite leg. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, optional end types, larger sizes, and material / gauge options.
$688.31$708.54
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$507.47$522.38
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$507.47$522.38
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$507.47$522.38
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$341.22$351.24
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$341.22$351.24
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$341.22$351.24
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are also available with 60º angle between legs. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$234.96$241.86
Available for Purchase
Subject to factory lead times
Additional Small or Large Bridge Pins are available for the QF® Clamp.
$2.18$2.24
Available for Purchase
Subject to factory lead times
Additional Small or Large Bridge Pins are available for the QF® Clamp.
$0.73$0.75
Available for Purchase
Subject to factory lead times
Additional Small or Large Bridge Pins are available for the QF® Clamp.
$0.73$0.75
Available for Purchase
Subject to factory lead times
Additional Small or Large Bridge Pins are available for the QF® Clamp.
$0.32
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$3.73$3.83
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$3.21$3.30
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$2.18$2.24
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$0.32
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$0.42
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$0.63
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$1.35
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$1.45$1.49
Available for Purchase
Subject to factory lead times
Nordfab Quick-Fit® Y Branches (sometimes called “true wyes”) are standard with QF rolled ends, allowing quick connections with other QF ductwork. These Y shape branches are also available with a 90º angle between the legs. 14 gauge material construction adds extra durability and the solid welded seams eliminate leakage. Elimination of air leakage makes a dust collection system more efficient, providing savings on energy costs. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$949.96$977.88
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$456.88$470.30
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$456.88$470.30
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$456.88$470.30
Available for Purchase
Subject to factory lead times
Nordfab Duct Branches in Y shape (sometimes called “true wyes” or "breeches" branches) are standard 60º between legs, optional 90º. Flanged Y Branches are standard with industry-standard Angle Flanges on both ends, the flanges are retained via a vanstone lip so that bolt holes can easily be aligned with those on existing flanged connections. When ordering, specify A, B, C. Both B & C each must be at least 50% of A, with B or C being at least 80% of the opposite leg. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, optional end types, larger sizes, and material / gauge options.
$688.31$708.54
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$507.47$522.38
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$507.47$522.38
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$507.47$522.38
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$341.22$351.24
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$341.22$351.24
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are standard 60º between legs, optional 90º. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$341.22$351.24
Available for Purchase
Subject to factory lead times
Nordfab QF® duct branches in Y shape (sometimes called “true wyes”) are also available with 60º angle between legs. QF Y Branches are standard with QF rolled ends, allowing quick connections with other QF ductwork. Contact Nordfab or your local Nordfab dealer for assistance with branch configurations not shown below, larger sizes, and material / gauge options. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.
$234.96$241.86
Available for Purchase
Subject to factory lead times
Additional Small or Large Bridge Pins are available for the QF® Clamp.
$2.18$2.24
Available for Purchase
Subject to factory lead times
Additional Small or Large Bridge Pins are available for the QF® Clamp.
$0.73$0.75
Available for Purchase
Subject to factory lead times
Additional Small or Large Bridge Pins are available for the QF® Clamp.
$0.73$0.75
Available for Purchase
Subject to factory lead times
Additional Small or Large Bridge Pins are available for the QF® Clamp.
$0.32
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$3.73$3.83
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$3.21$3.30
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$2.18$2.24
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$0.32
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$0.42
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$0.63
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$1.35
Available for Purchase
Subject to factory lead times
Replacement seal material for Quick-Fit Clamps is sold by the foot. Nitrile, silicone, or ePTFE material is available. View our seal material guide for help selecting the best Quick-Fit Clamp seal for your application. Note: - Nitrile and Silicone seals are stocked in rolls of 50'. - ePTFE seals are stocked in rolls of 100'. Regarding Item Numbers:
$1.45$1.49
Available for Purchase
Subject to factory lead times