Compressed Air
Compressed air filtration and treatment removes dirt, water and oil so your air meets the quality that tools, instruments and products need. Clean, dry air reduces maintenance and protects downstream equipment.
...Categories in Compressed Air Filtration - Clean Air Solutions (7)
FRL's
FRLs (filter, regulator and lubricator units) condition compressed air at the point of use. They remove contaminants, set the correct pressure and add lubrication for pneumatic tools and components.
FRL Options
- Combination FRL units – three functions in one assembly
- Filter/regulators – space-saving two-in-one
- Modular units – build custom air prep assemblies
- Accessories – gauges, brackets, shutoff valves and drains
- Metal and polycarbonate bowls – match pressure and environment
Choosing an FRL
Size the unit for peak air flow and select filter micron and regulator range. Skip the lubricator if components are pre-lubricated or air must be oil-free. Metal bowls are required in some environments.
Centro carries FRL units and parts for compressed air systems.
Related categories: Compressed Air | Piping | Filter Vessel Assemblies | Dryers | Drains
Dryers
Compressed air dryers remove water vapor to prevent condensation, corrosion and freezing in air lines. Dry air protects tools, instruments and products, especially in painting, food and outdoor applications.
Dryer Types
- Refrigerated dryers – economical dew points around 35-39°F
- Desiccant air dryers – dew points to -40°F or lower
- Membrane dryers – point-of-use drying without power
- Heatless and heated regeneration – desiccant efficiency options
Choosing a Dryer
Select based on required pressure dew point, flow, inlet temperature and ambient conditions. Pre-filters protect desiccant dryers from oil. Size for summer conditions to avoid wet air.
Centro supplies compressed air dryers and replacement desiccant.
Shop by type: Desiccant Air Dryers
Related categories: Compressed Air | Drains | Piping | Oil Water Separators | FRL's
Filter Vessel Assemblies
Filter vessel assemblies are essential filtration solutions, designed to meet the demands of diverse industrial applications. Engineered for efficiency and reliability, these assemblies promises superior filtration performance across industries such as water treatment, oil and gas, chemical processing, and pharmaceuticals. With customizable configurations and high-quality materials, they provide robust containment for filter elements, optimizing filtration efficiency while minimizing maintenance downtime. Filter vessel assemblies are adept at handling a wide range of flow rates and operating pressures, delivering consistent and clean fluid output crucial for maintaining operational integrity and regulatory compliance. Embrace innovation and precision in filtration technology with filter vessel assemblies through us. Browse our selection below or contact us for a product expert to help you in your selection.
Related categories: Compressed Air | FRL's | Piping | Dryers | Drains
Drains
Compressed air drains remove the condensate that collects in filters, dryers, receivers and drip legs. Removing water automatically protects equipment and keeps air quality up.
Drain Types
- Timer drains – simple, programmable discharge
- Zero air-loss drains – discharge water only, saving energy
- Float drains – mechanical, no power needed
- Internal filter bowl drains – automatic draining at filters
Choosing a Drain
Consider the condensate volume, pressure, power availability and oil content. Zero-loss drains pay back quickly by stopping wasted air. Route condensate to an oil-water separator before disposal.
Centro carries compressed air drains for filters, receivers and dryers.
Related categories: Compressed Air | Oil Water Separators | Dryers | Parts and Accessories | Piping
Filter Elements
Compressed air filter elements are the replaceable parts that do the filtering inside compressed air housings. Regular replacement keeps air quality high and pressure drop low.
Element Types
- Particulate elements – remove solids
- Coalescing elements – remove oil and water aerosols
- Activated carbon elements – remove oil vapor
- OEM interchangeable elements – fit major brands
Replacement Tips
Replace elements annually or when pressure drop rises. Have the housing brand and model ready to find the right element.
Centro supplies compressed air filter elements.
Related categories: Compressed Air | Compressor Parts | Blowguns | Parts and Accessories | Oil Water Separators
Parts and Accessories
Compressed air parts and accessories keep air systems running efficiently. Replacement elements, gauges, fittings and service kits maintain filters, dryers and drains.
Parts & Accessories
- Filter elements – replacement cartridges for housings
- Service kits – seals, valves and drains
- Gauges and indicators – pressure and differential pressure
- Fittings and couplers – connections and quick disconnects
- Hose and reels – point-of-use distribution
Maintenance Tips
Replace filter elements at least annually and check drains regularly. Fixing leaks in fittings and hoses cuts compressor energy costs.
Centro supplies compressed air parts and accessories.
Related categories: Compressed Air | Blowguns | Oil Water Separators | Filter Elements | Drains
Compressor Parts
Compressor parts keep air compressors running efficiently. Regular replacement of filters, separators and wear parts protects the compressor and lowers energy costs.
Parts Available
- Air intake filters – protect compressor elements
- Oil filters and separators – rotary screw maintenance
- Valves and gaskets – reciprocating compressor repairs
- Belts and couplings – drive components
- Lubricants – compressor oils
Ordering Parts
Have compressor make, model and serial number ready. Follow service intervals for best efficiency.
Centro supplies compressor parts.
Related categories: Compressed Air | Filter Elements | Blowguns | Parts and Accessories | Oil Water Separators
Filter
Filter
5,282 items
content loaded
Part number 1910000443 from Stauff is a Spin On Element. It is commonly found in mobile machinery, construction equipment, and wind energy applications. Stauff is recognized globally for engineering products that meet strict performance standards.
$72.31$78.59
Available for Purchase
Subject to factory lead times
The Stauff 1910000444 is a Spin On Element. This product serves professionals across marine, mobile machinery, and industrial automation sectors. Stauff is recognized globally for engineering products that meet strict performance standards. It is designed to comply with applicable ISO and DIN requirements.
$121.17$131.70
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000445 is a Tank Top Element. This product serves professionals across construction equipment, hydraulics, and marine sectors. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards.
$104.15$113.20
Available for Purchase
Subject to factory lead times
The Stauff 1910000446 is a Tank Top Element. It is commonly found in mobile machinery, hydraulics, and construction equipment applications. Backed by Stauff's commitment to quality, the 1910000446 is built to perform under real-world conditions. This product meets relevant ISO and DIN standards.
$85.04$92.43
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000448 is a Tank Top Element. This product serves professionals across mobile machinery, hydraulics, and marine sectors. Stauff products are trusted by engineers and specifiers worldwide.
$121.17$131.70
Available for Purchase
Subject to factory lead times
The 1910000666 from Stauff is a Spin On Element. Typical applications span hydraulics, mobile machinery, and wind energy environments. Stauff products are trusted by engineers and specifiers worldwide.
$44.63$48.51
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000670 is a Spin On Element. This product serves professionals across industrial automation, hydraulics, and mobile machinery sectors. Stauff is recognized globally for engineering products that meet strict performance standards.
$110.28$119.86
Available for Purchase
Subject to factory lead times
Part number 1910000672 from Stauff is a Tank Top Element. It is commonly found in construction equipment, mobile machinery, and industrial automation applications. Backed by Stauff's commitment to quality, the 1910000672 is built to perform under real-world conditions.
$78.25$85.05
Available for Purchase
Subject to factory lead times
The 1910000675 from Stauff is a Spin-on Filter Element. This product serves professionals across mobile machinery, construction equipment, and marine sectors. The 1910000675 reflects Stauff's long-standing reputation for quality and innovation. It is designed to comply with applicable DIN and ISO requirements.
$174.28$189.43
Available for Purchase
Subject to factory lead times
The Stauff 1910000836 is a Spin On Element. This product serves professionals across construction equipment, mobile machinery, and hydraulics sectors. Stauff is recognized globally for engineering products that meet strict performance standards. This product meets relevant DIN and ISO standards.
$223.16$242.56
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000854 is a Spin On Filter Element. This product serves professionals across wind energy, mobile machinery, and construction equipment sectors. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards. This product meets relevant DIN and ISO standards.
$92.40$100.43
Available for Purchase
Subject to factory lead times
The Stauff 1910000906 is a Spin On Element. This product serves professionals across industrial automation, wind energy, and construction equipment sectors. The 1910000906 reflects Stauff's long-standing reputation for quality and innovation. It is designed to comply with applicable SAE and DIN requirements.
$127.53$138.61
Available for Purchase
Subject to factory lead times
The Stauff 1910000912 is a Spin On Element. This product serves professionals across hydraulics, construction equipment, and industrial automation sectors. The 1910000912 reflects Stauff's long-standing reputation for quality and innovation.
$147.61$160.44
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000991 is a Spin On Element. Typical applications span industrial automation, wind energy, and hydraulics environments. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards.
$110.55$120.16
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000993 is a Spin On Element. This product serves professionals across marine, construction equipment, and wind energy sectors. Stauff is recognized globally for engineering products that meet strict performance standards.
$174.28$189.43
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910001426 is a Spin On Filter Element. This product serves professionals across industrial automation, hydraulics, and marine sectors. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards. It is designed to comply with applicable SAE and DIN requirements.
$250.07$271.81
Available for Purchase
Subject to factory lead times
The 1910001654 from Stauff is a Spin On Element. Typical applications span industrial automation, construction equipment, and wind energy environments. Stauff is recognized globally for engineering products that meet strict performance standards. It is designed to comply with applicable DIN and SAE requirements.
$312.69$339.87
Available for Purchase
Subject to factory lead times
The Stauff 6100007032 is a Filter Element Usa. This product serves professionals across mobile machinery, marine, and hydraulics sectors. Stauff is recognized globally for engineering products that meet strict performance standards. It is designed to comply with applicable SAE and ISO requirements.
$38.30$41.62
Available for Purchase
Subject to factory lead times
The 6100011424 from Stauff is a Filter Element. It is commonly found in wind energy, marine, and construction equipment applications. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards. It is designed to comply with applicable ISO and SAE requirements.
$189.59$206.07
Available for Purchase
Subject to factory lead times
Dry-O-Lite, the industry-leading deliquescent desiccant, is a chemical drying agent specifically formulated for Van Air Systems single tower compressed air dryers and natural gas pipeline dryers. Dry-O-Lite is a dense hygroscopic tablet that absorbs water vapor from streams of compressed air or gas. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. In a properly sized D-series Compressed Air Dryer or Pipeline Dryer, Dry-O-Lite will establish a relative humidity of 55%, which equates to a dew point approximately 20°F lower than the temperature of the compressed air or gas at the inlet of the dryer. *Also known as GasDry Prime Features and Benefits No energy consumption Prevents condensation Can be used indoors or outdoors Prevents wintertime air and gas line freeze-ups Environmentally safe Low cost of operation relative to refrigerated dryers and regenerative desiccant dryers 3/4" tablet Little or no maintenance on drying equipment Available in 50lb bags, 50lb pails, 506lb steel drums and 2,000lb bulk bags Applications Abrasive blasting Portable air drying Low pressure gases, e.g. digester gas and landfill gas Remote outdoor locations without electricity Fuel gas dehydration for natural gas Ready-mix, asphalt, and concrete plants Pulp and paper Steel mills Dirty environments or areas with electrical classification restrictions Downloads Brochure Safety Data Sheet (SDS)
$3,449.92
Available for Purchase
Subject to factory lead times
Dry-O-Lite, the industry-leading deliquescent desiccant, is a chemical drying agent specifically formulated for Van Air Systems single tower compressed air dryers and natural gas pipeline dryers. Dry-O-Lite is a dense hygroscopic tablet that absorbs water vapor from streams of compressed air or gas. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. In a properly sized D-series Compressed Air Dryer or Pipeline Dryer, Dry-O-Lite will establish a relative humidity of 55%, which equates to a dew point approximately 20°F lower than the temperature of the compressed air or gas at the inlet of the dryer. *Also known as GasDry Prime ** Online orders are limited to 150lbs. or less. For larger quantities please call us at 1-800-840-9906 or contact a local distributor. Features and Benefits No energy consumption Prevents condensation Can be used indoors or outdoors Prevents wintertime air and gas line freeze-ups Environmentally safe Low cost of operation relative to refrigerated dryers and regenerative desiccant dryers 3/4" tablet Little or no maintenance on drying equipment Available in 50lb bags, 50lb pails, 506lb steel drums and 2,000lb bulk bags Applications Abrasive blasting Portable air drying Low pressure gases, e.g. digester gas and landfill gas Remote outdoor locations without electricity Fuel gas dehydration for natural gas Ready-mix, asphalt, and concrete plants Pulp and paper Steel mills Dirty environments or areas with electrical classification restrictions Downloads Brochure Safety Data Sheet (SDS)
$65.00
Available for Purchase
Subject to factory lead times
Dry-O-Lite, the industry-leading deliquescent desiccant, is a chemical drying agent specifically formulated for Van Air Systems single tower compressed air dryers and natural gas pipeline dryers. Dry-O-Lite is a dense hygroscopic tablet that absorbs water vapor from streams of compressed air or gas. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. In a properly sized D-series Compressed Air Dryer or Pipeline Dryer, Dry-O-Lite will establish a relative humidity of 55%, which equates to a dew point approximately 20°F lower than the temperature of the compressed air or gas at the inlet of the dryer. *Also known as GasDry Prime Features and Benefits No energy consumption Prevents condensation Can be used indoors or outdoors Prevents wintertime air and gas line freeze-ups Environmentally safe Low cost of operation relative to refrigerated dryers and regenerative desiccant dryers 3/4" tablet Little or no maintenance on drying equipment Available in 50lb bags, 50lb pails, 506lb steel drums and 2,000lb bulk bags Applications Abrasive blasting Portable air drying Low pressure gases, e.g. digester gas and landfill gas Remote outdoor locations without electricity Fuel gas dehydration for natural gas Ready-mix, asphalt, and concrete plants Pulp and paper Steel mills Dirty environments or areas with electrical classification restrictions Downloads Brochure Safety Data Sheet (SDS)
$80.00
Available for Purchase
Subject to factory lead times
Dry-O-Lite, the industry-leading deliquescent desiccant, is a chemical drying agent specifically formulated for Van Air Systems single tower compressed air dryers and natural gas pipeline dryers. Dry-O-Lite is a dense hygroscopic tablet that absorbs water vapor from streams of compressed air or gas. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. In a properly sized D-series Compressed Air Dryer or Pipeline Dryer, Dry-O-Lite will establish a relative humidity of 55%, which equates to a dew point approximately 20°F lower than the temperature of the compressed air or gas at the inlet of the dryer. *Also known as GasDry Prime Features and Benefits No energy consumption Prevents condensation Can be used indoors or outdoors Prevents wintertime air and gas line freeze-ups Environmentally safe Low cost of operation relative to refrigerated dryers and regenerative desiccant dryers 3/4" tablet Little or no maintenance on drying equipment Available in 50lb bags, 50lb pails, 506lb steel drums and 2,000lb bulk bags Applications Abrasive blasting Portable air drying Low pressure gases, e.g. digester gas and landfill gas Remote outdoor locations without electricity Fuel gas dehydration for natural gas Ready-mix, asphalt, and concrete plants Pulp and paper Steel mills Dirty environments or areas with electrical classification restrictions Downloads Brochure Safety Data Sheet (SDS)
$110.00
Available for Purchase
Subject to factory lead times
Also known as GasDry Peak SP is a leading deliquescent desiccant formulated primarily for the dehydration of natural gas for use in Van Air Systems Pipeline Dryers when the gas temperature is below 80°F. SP is a dense hygroscopic tablet that absorbs water vapor. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. Van Air Systems deliquescent desiccants, including SP, are non-toxic and fully water soluble. In a properly sized Pipeline Dryer, SP will establish a relative humidity of 33%, which equates to a dew point approximately 30°F lower than the temperature of the gas at the inlet of the dryer. Features and Benefits Requires no energy or fuel For operating temperatures 80°F and lower Prevents condensation Inhibits natural gas hydrate formation Can be used indoors or outdoors Prevents gas line freeze-ups Environmentally safe No BTEX emissions Available in 50lb bags and 400lb steel drums Applications Drying high pressure, low temperature sales gas Fuel gas dehydration Instrument gas dehydration Downloads Brochure
$140.00
Available for Purchase
Subject to factory lead times
Part number 1910000443 from Stauff is a Spin On Element. It is commonly found in mobile machinery, construction equipment, and wind energy applications. Stauff is recognized globally for engineering products that meet strict performance standards.
$72.31$78.59
Available for Purchase
Subject to factory lead times
The Stauff 1910000444 is a Spin On Element. This product serves professionals across marine, mobile machinery, and industrial automation sectors. Stauff is recognized globally for engineering products that meet strict performance standards. It is designed to comply with applicable ISO and DIN requirements.
$121.17$131.70
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000445 is a Tank Top Element. This product serves professionals across construction equipment, hydraulics, and marine sectors. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards.
$104.15$113.20
Available for Purchase
Subject to factory lead times
The Stauff 1910000446 is a Tank Top Element. It is commonly found in mobile machinery, hydraulics, and construction equipment applications. Backed by Stauff's commitment to quality, the 1910000446 is built to perform under real-world conditions. This product meets relevant ISO and DIN standards.
$85.04$92.43
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000448 is a Tank Top Element. This product serves professionals across mobile machinery, hydraulics, and marine sectors. Stauff products are trusted by engineers and specifiers worldwide.
$121.17$131.70
Available for Purchase
Subject to factory lead times
The 1910000666 from Stauff is a Spin On Element. Typical applications span hydraulics, mobile machinery, and wind energy environments. Stauff products are trusted by engineers and specifiers worldwide.
$44.63$48.51
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000670 is a Spin On Element. This product serves professionals across industrial automation, hydraulics, and mobile machinery sectors. Stauff is recognized globally for engineering products that meet strict performance standards.
$110.28$119.86
Available for Purchase
Subject to factory lead times
Part number 1910000672 from Stauff is a Tank Top Element. It is commonly found in construction equipment, mobile machinery, and industrial automation applications. Backed by Stauff's commitment to quality, the 1910000672 is built to perform under real-world conditions.
$78.25$85.05
Available for Purchase
Subject to factory lead times
The 1910000675 from Stauff is a Spin-on Filter Element. This product serves professionals across mobile machinery, construction equipment, and marine sectors. The 1910000675 reflects Stauff's long-standing reputation for quality and innovation. It is designed to comply with applicable DIN and ISO requirements.
$174.28$189.43
Available for Purchase
Subject to factory lead times
The Stauff 1910000836 is a Spin On Element. This product serves professionals across construction equipment, mobile machinery, and hydraulics sectors. Stauff is recognized globally for engineering products that meet strict performance standards. This product meets relevant DIN and ISO standards.
$223.16$242.56
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000854 is a Spin On Filter Element. This product serves professionals across wind energy, mobile machinery, and construction equipment sectors. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards. This product meets relevant DIN and ISO standards.
$92.40$100.43
Available for Purchase
Subject to factory lead times
The Stauff 1910000906 is a Spin On Element. This product serves professionals across industrial automation, wind energy, and construction equipment sectors. The 1910000906 reflects Stauff's long-standing reputation for quality and innovation. It is designed to comply with applicable SAE and DIN requirements.
$127.53$138.61
Available for Purchase
Subject to factory lead times
The Stauff 1910000912 is a Spin On Element. This product serves professionals across hydraulics, construction equipment, and industrial automation sectors. The 1910000912 reflects Stauff's long-standing reputation for quality and innovation.
$147.61$160.44
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000991 is a Spin On Element. Typical applications span industrial automation, wind energy, and hydraulics environments. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards.
$110.55$120.16
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910000993 is a Spin On Element. This product serves professionals across marine, construction equipment, and wind energy sectors. Stauff is recognized globally for engineering products that meet strict performance standards.
$174.28$189.43
Available for Purchase
Subject to factory lead times
Engineered by Stauff, the 1910001426 is a Spin On Filter Element. This product serves professionals across industrial automation, hydraulics, and marine sectors. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards. It is designed to comply with applicable SAE and DIN requirements.
$250.07$271.81
Available for Purchase
Subject to factory lead times
The 1910001654 from Stauff is a Spin On Element. Typical applications span industrial automation, construction equipment, and wind energy environments. Stauff is recognized globally for engineering products that meet strict performance standards. It is designed to comply with applicable DIN and SAE requirements.
$312.69$339.87
Available for Purchase
Subject to factory lead times
The Stauff 6100007032 is a Filter Element Usa. This product serves professionals across mobile machinery, marine, and hydraulics sectors. Stauff is recognized globally for engineering products that meet strict performance standards. It is designed to comply with applicable SAE and ISO requirements.
$38.30$41.62
Available for Purchase
Subject to factory lead times
The 6100011424 from Stauff is a Filter Element. It is commonly found in wind energy, marine, and construction equipment applications. As a leader in hydraulic components and fluid power accessories, Stauff manufactures every component to exacting standards. It is designed to comply with applicable ISO and SAE requirements.
$189.59$206.07
Available for Purchase
Subject to factory lead times
Dry-O-Lite, the industry-leading deliquescent desiccant, is a chemical drying agent specifically formulated for Van Air Systems single tower compressed air dryers and natural gas pipeline dryers. Dry-O-Lite is a dense hygroscopic tablet that absorbs water vapor from streams of compressed air or gas. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. In a properly sized D-series Compressed Air Dryer or Pipeline Dryer, Dry-O-Lite will establish a relative humidity of 55%, which equates to a dew point approximately 20°F lower than the temperature of the compressed air or gas at the inlet of the dryer. *Also known as GasDry Prime Features and Benefits No energy consumption Prevents condensation Can be used indoors or outdoors Prevents wintertime air and gas line freeze-ups Environmentally safe Low cost of operation relative to refrigerated dryers and regenerative desiccant dryers 3/4" tablet Little or no maintenance on drying equipment Available in 50lb bags, 50lb pails, 506lb steel drums and 2,000lb bulk bags Applications Abrasive blasting Portable air drying Low pressure gases, e.g. digester gas and landfill gas Remote outdoor locations without electricity Fuel gas dehydration for natural gas Ready-mix, asphalt, and concrete plants Pulp and paper Steel mills Dirty environments or areas with electrical classification restrictions Downloads Brochure Safety Data Sheet (SDS)
$3,449.92
Available for Purchase
Subject to factory lead times
Dry-O-Lite, the industry-leading deliquescent desiccant, is a chemical drying agent specifically formulated for Van Air Systems single tower compressed air dryers and natural gas pipeline dryers. Dry-O-Lite is a dense hygroscopic tablet that absorbs water vapor from streams of compressed air or gas. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. In a properly sized D-series Compressed Air Dryer or Pipeline Dryer, Dry-O-Lite will establish a relative humidity of 55%, which equates to a dew point approximately 20°F lower than the temperature of the compressed air or gas at the inlet of the dryer. *Also known as GasDry Prime ** Online orders are limited to 150lbs. or less. For larger quantities please call us at 1-800-840-9906 or contact a local distributor. Features and Benefits No energy consumption Prevents condensation Can be used indoors or outdoors Prevents wintertime air and gas line freeze-ups Environmentally safe Low cost of operation relative to refrigerated dryers and regenerative desiccant dryers 3/4" tablet Little or no maintenance on drying equipment Available in 50lb bags, 50lb pails, 506lb steel drums and 2,000lb bulk bags Applications Abrasive blasting Portable air drying Low pressure gases, e.g. digester gas and landfill gas Remote outdoor locations without electricity Fuel gas dehydration for natural gas Ready-mix, asphalt, and concrete plants Pulp and paper Steel mills Dirty environments or areas with electrical classification restrictions Downloads Brochure Safety Data Sheet (SDS)
$65.00
Available for Purchase
Subject to factory lead times
Dry-O-Lite, the industry-leading deliquescent desiccant, is a chemical drying agent specifically formulated for Van Air Systems single tower compressed air dryers and natural gas pipeline dryers. Dry-O-Lite is a dense hygroscopic tablet that absorbs water vapor from streams of compressed air or gas. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. In a properly sized D-series Compressed Air Dryer or Pipeline Dryer, Dry-O-Lite will establish a relative humidity of 55%, which equates to a dew point approximately 20°F lower than the temperature of the compressed air or gas at the inlet of the dryer. *Also known as GasDry Prime Features and Benefits No energy consumption Prevents condensation Can be used indoors or outdoors Prevents wintertime air and gas line freeze-ups Environmentally safe Low cost of operation relative to refrigerated dryers and regenerative desiccant dryers 3/4" tablet Little or no maintenance on drying equipment Available in 50lb bags, 50lb pails, 506lb steel drums and 2,000lb bulk bags Applications Abrasive blasting Portable air drying Low pressure gases, e.g. digester gas and landfill gas Remote outdoor locations without electricity Fuel gas dehydration for natural gas Ready-mix, asphalt, and concrete plants Pulp and paper Steel mills Dirty environments or areas with electrical classification restrictions Downloads Brochure Safety Data Sheet (SDS)
$80.00
Available for Purchase
Subject to factory lead times
Dry-O-Lite, the industry-leading deliquescent desiccant, is a chemical drying agent specifically formulated for Van Air Systems single tower compressed air dryers and natural gas pipeline dryers. Dry-O-Lite is a dense hygroscopic tablet that absorbs water vapor from streams of compressed air or gas. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. In a properly sized D-series Compressed Air Dryer or Pipeline Dryer, Dry-O-Lite will establish a relative humidity of 55%, which equates to a dew point approximately 20°F lower than the temperature of the compressed air or gas at the inlet of the dryer. *Also known as GasDry Prime Features and Benefits No energy consumption Prevents condensation Can be used indoors or outdoors Prevents wintertime air and gas line freeze-ups Environmentally safe Low cost of operation relative to refrigerated dryers and regenerative desiccant dryers 3/4" tablet Little or no maintenance on drying equipment Available in 50lb bags, 50lb pails, 506lb steel drums and 2,000lb bulk bags Applications Abrasive blasting Portable air drying Low pressure gases, e.g. digester gas and landfill gas Remote outdoor locations without electricity Fuel gas dehydration for natural gas Ready-mix, asphalt, and concrete plants Pulp and paper Steel mills Dirty environments or areas with electrical classification restrictions Downloads Brochure Safety Data Sheet (SDS)
$110.00
Available for Purchase
Subject to factory lead times
Also known as GasDry Peak SP is a leading deliquescent desiccant formulated primarily for the dehydration of natural gas for use in Van Air Systems Pipeline Dryers when the gas temperature is below 80°F. SP is a dense hygroscopic tablet that absorbs water vapor. The surface of the desiccant tablet dissolves slowly, forming a brine solution which drops from the surface. The tablet continuously dissolves, or deliquesces, until the desiccant is fully consumed. Van Air Systems deliquescent desiccants, including SP, are non-toxic and fully water soluble. In a properly sized Pipeline Dryer, SP will establish a relative humidity of 33%, which equates to a dew point approximately 30°F lower than the temperature of the gas at the inlet of the dryer. Features and Benefits Requires no energy or fuel For operating temperatures 80°F and lower Prevents condensation Inhibits natural gas hydrate formation Can be used indoors or outdoors Prevents gas line freeze-ups Environmentally safe No BTEX emissions Available in 50lb bags and 400lb steel drums Applications Drying high pressure, low temperature sales gas Fuel gas dehydration Instrument gas dehydration Downloads Brochure
$140.00
Available for Purchase
Subject to factory lead times