Automation and Robotics - Schunk
What is Automation and Robotics?
Automation and Robotics involve leveraging technology to automate tasks and processes traditionally performed by people. This integration enhances efficiency ...
Three-jaw grippers center and hold round, cylindrical and spherical parts using three jaws spaced at 120°. They give excellent concentric gripping for shafts, caps, pistons and turned parts in machine tending and assembly.
Three-Jaw Gripper Features
- Self-centering grip – precise alignment of round parts
- High grip force – secure handling of heavier parts
- Inside or outside gripping – grip bores or outer diameters
- Pneumatic and electric models – speed or programmability
- Sealed versions – machining and dirty environments
Sizing a Gripper
Calculate grip force from part weight, acceleration and finger length. Choose jaw stroke to cover your part diameter range. Custom jaws improve contact and repeatability.
Centro supplies three-jaw grippers and jaws to match.
Related categories: Pneumatic Gripper | O-Ring Gripper | Angular Grippers | 4-Finger Gripper
Two-jaw grippers are the workhorse of robotic and automated part handling. Two parallel or angular fingers close on the part to grip it securely, so they suit picking, placing, machine tending and assembly work.
Two-Jaw Gripper Options
- Parallel grippers – fingers move straight in and out for consistent gripping
- Angular grippers – fingers pivot open for compact, economical designs
- Long-stroke grippers – handle a wide range of part sizes
- Pneumatic and electric drives – fast air-powered or programmable electric
- Sealed and high-force models – for dirty environments and heavy parts
Sizing a Gripper
Calculate the grip force needed for the part's weight, plus a safety factor for acceleration and finger length. Choose a stroke that clears the part comfortably. Custom fingers shaped to the part improve grip and prevent slipping. Position sensors confirm that the gripper has opened or closed.
Centro carries 2-jaw grippers and the sensors, fingers and adapters to put them to work.
Related categories: Pneumatic Gripper | 4-Finger Gripper | Angular Grippers | O-Ring Gripper
Gripper accessories fill the gaps between your robot, gripper and parts. Adapter plates, fingers, sensors and compliance devices make end-of-arm tooling fit properly and work reliably, and they're often what turns a standard gripper into a solution for your part.
Accessories Available
- Adapter and mounting plates – connect grippers to robot flanges
- Finger blanks and jaws – machine custom fingers for your part
- Position sensors – confirm open, closed and part-present states
- Compliance and collision devices – protect tooling during crashes
- Quick-change parts and fittings – speed changeovers
Finding the Right Part
Start with the gripper and robot model numbers, since most accessories are specific to a series. For custom fingers, a part drawing or sample helps get the shape right. Adding sensors and compliance often makes a cell much more reliable.
Centro supplies gripper accessories and can help you finish your end-of-arm tooling package.
Related categories: Gripper Accessories | Sensors | Rotary Gripper Modules | Gripper Kits
Angular grippers open their jaws in an arc rather than straight in and out. They're compact, lightweight and economical, and the wide opening clears parts easily for fast pick-and-place.
Angular Gripper Features
- Wide jaw opening – clears parts without extra robot motion
- Compact design – low weight on robot arms
- High grip force – strong hold for size
- Pneumatic operation – fast, simple control
- Sensor-ready – magnetic position sensing
When to Use Angular Grippers
Angular grippers suit applications where the jaw arc won't interfere with nearby parts or fixtures. For parts that need precise centering, consider parallel grippers. Calculate grip force with finger length in mind.
Centro supplies angular grippers and accessories for automation.
Related categories: Pneumatic Gripper | 4-Finger Gripper | O-Ring Gripper | 2 Jaw Gripper
Gripper jaws contact the part directly, so their shape and material decide how securely and gently it's held. Custom jaws improve grip, centering and repeatability.
Jaw Options
- Jaw blanks – machine to your part shape
- Standard jaws – common geometries
- Soft jaws – protect delicate surfaces
- Quick-change jaws – fast changeovers
- 3D printed jaws – rapid prototyping
Choosing Jaws
Match the jaw interface to your gripper and design shapes that fully support the part. Keep jaw length within gripper limits.
Centro supplies gripper jaws and can help you choose the right jaw style and material for your parts.
Related categories: Gripper Accessories | Quick Change Systems | Gripper Kits | Rotary Gripper Modules
Gripper sensors tell your controller whether a gripper is open, closed or holding a part. This feedback prevents crashes, detects dropped parts and makes automated cells more reliable.
Sensor Types
- Magnetic slot sensors – detect jaw position on pneumatic grippers
- Inductive proximity sensors – sense gripper jaw targets
- Analog position sensors – continuous jaw position measurement
- Multi-position sensors – program multiple switching points
- Cables and connectors – M8 and M12 quick-disconnects
Choosing a Sensor
Sensors are usually specific to the gripper series, so start with the gripper model. Analog sensors can verify part size and detect wrong parts. Use flex-rated cables for robot motion.
Centro supplies gripper sensors and cables matched to your grippers.
Related categories: Gripper Accessories | Rotary Gripper Modules | Miscellaneous | Gripper Kits
Gripper kits package everything needed to put a gripper on a robot: the gripper, adapter plates, fingers, sensors and fittings. They simplify ordering and speed up integration, especially on cobots.
What Kits Include
- Gripper – pneumatic, electric or vacuum
- Robot adapter plate – matched to your robot flange
- Fingers or jaws – standard or blank for customizing
- Sensors and cables – position feedback
- Software plug-ins – simple setup on popular cobots
Choosing a Kit
Select by robot brand and payload, part size and weight, and gripping style. Plug-and-play kits let you go from unboxing to picking quickly.
Centro offers gripper kits for popular robots and can help you choose the right package.
Related categories: Gripper Accessories | Rotary Gripper Modules | Quick Change Systems | Sensors
Rotary gripper modules combine gripping and rotation in one compact unit. They let a robot or pick-and-place system grip a part and turn it, which is useful for flipping, orienting and assembly tasks.
Features
- Integrated grip and rotate – one module replaces two devices
- Adjustable rotation angles – 90°, 180° and custom positions
- Pneumatic and electric drives – speed or programmable control
- Through-feed air channels – no external hoses to tangle
- Position sensing – confirm rotation and grip states
Choosing a Module
Consider part weight, grip force, rotation angle, cycle time and available mounting space. Compact modules reduce tooling weight and inertia on robot arms.
Centro supplies rotary gripper modules for automated handling and assembly.
Related categories: Gripper Accessories | Gripper Kits | Sensors | Miscellaneous
Quick change systems let robots swap end-of-arm tools in seconds, manually or automatically. They cut changeover time and allow one robot to handle multiple tasks.
Quick Change Options
- Manual tool changers – fast, tool-free swaps
- Automatic tool changers – robot-controlled changes
- Utility modules – pass air, power and signals
- Tool stands – store tools safely
Choosing a System
Select by payload, utilities needed and changeover frequency. Fail-safe locking protects tools during power or air loss.
Centro supplies quick change systems for robotic tooling.
Related categories: Gripper Accessories | Jaws | Gripper Kits | Rotary Gripper Modules
Electrical grippers are advanced robotic end-effector devices designed for precise and programmable object manipulation in automation and robotics applications. Unlike traditional mechanical grippers, which rely on physical force and motion, electrical grippers use motors and sensors to grasp, lift, and manipulate objects with exceptional control and precision. These grippers often incorporate servo motors, encoders, and feedback systems to enable fine-tuned movements and force adjustment. Electrical grippers find applications in manufacturing, electronics, and logistics, where they are utilized for pick-and-place operations, assembly, and material handling. Their programmable nature and adaptability to various object sizes and shapes make electrical grippers invaluable in achieving high automation efficiency, flexibility, and accuracy, contributing to improved production processes and reduced labor costs.
Related categories: Grippers/End of Arm Tooling | Gripper Accessories | Vacuum Grippers | Magnetic Grippers
Four-finger grippers grip round and irregular parts from four sides at once, centering and holding them securely. They're well suited to handling cylinders, shafts, caps, bottles and other round parts in machine tending and assembly.
Benefits
- Self-centering grip – precise alignment of round parts
- Higher stability – four contact points reduce slipping
- Pneumatic and electric versions – speed or programmable control
- Through-bore designs – route air or cables through the center
Choosing a Gripper
Calculate grip force for the part's weight and acceleration, and choose a stroke that covers your part range. Custom fingers shaped to the part improve hold. Sealed models are available for dusty or machining environments.
Centro supplies four-finger grippers and accessories for robotic and automated handling.
Related categories: Pneumatic Gripper | Angular Grippers | 2 Jaw Gripper | O-Ring Gripper
O-ring grippers handle O-rings, seals and other small flexible rings during automated assembly. They pick, stretch and place rings onto parts precisely, which is a task that's tedious and error-prone by hand.
O-Ring Gripper Features
- Multi-finger expansion – stretch rings evenly for installation
- Compact pneumatic design – fits assembly stations and robots
- Adjustable stroke – handles different ring sizes
- Precise placement – consistent seating in grooves
Applications
O-ring grippers are used in automotive, hydraulic, medical device and valve assembly where seals must be installed reliably at high volume. Gripper selection depends on ring diameter, cross-section, material hardness and stretch limits.
Centro can help you specify O-ring grippers for automated seal installation.
Related categories: Pneumatic Gripper | 3 Jaw Gripper | Angular Grippers | 4-Finger Gripper
Magnetic grippers lift and move steel parts using permanent or electro-permanent magnets. They handle flat sheets, blanks and irregular parts without fingers or vacuum, and grip securely even on oily or perforated surfaces.
Magnetic Gripper Types
- Pneumatic magnetic grippers – air-actuated on/off holding
- Electro-permanent grippers – hold without continuous power
- Compact grippers – small parts and tight spaces
- High-force grippers – heavy plates and castings
- Sensors and accessories – part presence and mounting
Choosing a Gripper
Holding force depends on material thickness, surface condition and air gap. Thin sheets need grippers designed to avoid picking more than one sheet. Size with a safety factor for robot acceleration.
Centro supplies magnetic grippers for robotic sheet metal and part handling.
Related categories: Grippers/End of Arm Tooling | Vacuum Grippers | Gripper Accessories | Pneumatic Gripper
Vacuum grippers are specialized robotic end-of-arm tools used in automation and material handling applications to grasp and manipulate objects with the power of suction securely. These grippers employ a vacuum system to create negative pressure, adhering to the surface of an object and allowing it to be lifted, moved, and precisely positioned. Vacuum grippers are widely used in manufacturing, logistics, and packaging industries, where they excel in handling a diverse range of items, from delicate and irregularly shaped objects to heavy and flat materials. Their adaptability, quick response times, and ability to securely hold objects without causing damage make vacuum grippers valuable assets in achieving efficient and flexible automation solutions, improving productivity, and reducing manual labor in various industrial processes.
Related categories: Grippers/End of Arm Tooling | Gripper Accessories | Magnetic Grippers | Electrical Grippers
$2,772.08
Subject to factory lead times
$3,250.71
Subject to factory lead times
$3,978.63
Subject to factory lead times
$4,796.30
Subject to factory lead times
$6,521.37
Subject to factory lead times
$2,981.48
Subject to factory lead times
$2,981.48
Subject to factory lead times
$3,928.78
Subject to factory lead times
$5,135.33
Subject to factory lead times
$3,250.71
Subject to factory lead times
$5,135.33
Subject to factory lead times
$2,772.08
Subject to factory lead times
$3,978.63
Subject to factory lead times
$3,480.06
Subject to factory lead times
$6,870.37
Subject to factory lead times
$282.20
Subject to factory lead times
$294.16
Subject to factory lead times
$424.79
Subject to factory lead times
$480.63
Subject to factory lead times
$350.00
Subject to factory lead times
$366.96
Subject to factory lead times
$385.90
Subject to factory lead times
$490.60
Subject to factory lead times
$282.20
Subject to factory lead times
$2,772.08
Subject to factory lead times
$3,250.71
Subject to factory lead times
$3,978.63
Subject to factory lead times
$4,796.30
Subject to factory lead times
$6,521.37
Subject to factory lead times
$2,981.48
Subject to factory lead times
$2,981.48
Subject to factory lead times
$3,928.78
Subject to factory lead times
$5,135.33
Subject to factory lead times
$3,250.71
Subject to factory lead times
$5,135.33
Subject to factory lead times
$2,772.08
Subject to factory lead times
$3,978.63
Subject to factory lead times
$3,480.06
Subject to factory lead times
$6,870.37
Subject to factory lead times
$282.20
Subject to factory lead times
$294.16
Subject to factory lead times
$424.79
Subject to factory lead times
$480.63
Subject to factory lead times
$350.00
Subject to factory lead times
$366.96
Subject to factory lead times
$385.90
Subject to factory lead times
$490.60
Subject to factory lead times
$282.20
Subject to factory lead times
- Getting started with industrial automation begins with identifying the tasks that are repetitive, hazardous, labor-intensive, or quality-critical — these are the best candidates for automation. Common first steps include adding sensors for detection and feedback, installing pneumatic or electric actuators to replace manual movements, and using PLCs or smart relays to coordinate the sequence. For more advanced automation, industrial robots and collaborative robots (cobots) can handle pick-and-place, assembly, welding, palletizing, and packaging tasks with grippers and end-of-arm tooling (EOAT). Machine vision systems add inspection and quality control capabilities. Safety equipment — light curtains, safety switches, emergency stops, and guarding — is required to protect operators working near automated equipment. Centro's Automation and Robotics division offers products across all of these areas and can help you evaluate which tasks to automate first for the best return on investment.
- End-of-arm tooling (EOAT) refers to the device mounted on the end of a robotic arm that directly interacts with the workpiece — it is what allows the robot to grip, move, orient, and place parts. The most common EOAT type is the gripper, and selecting the right one depends on the workpiece material, shape, weight, and process requirements. Pneumatic grippers use compressed air and are the workhorse for general-purpose pick-and-place — they are fast, reliable, and available in parallel, angular, and three-finger configurations. Electric grippers use servo motors for programmable grip force and position, making them ideal for delicate or variable parts requiring precise control. Vacuum grippers use suction cups to handle flat, smooth, or irregularly shaped items like boxes, sheets, and glass without mechanical clamping. Magnetic grippers handle ferrous metal parts without contact mechanisms, offering quick cycle times for steel stamping and machining operations. Quick-change systems allow a single robot to swap between different EOAT types for multi-task flexibility.
- A collaborative robot — or cobot — is designed to work safely alongside human operators in a shared workspace without requiring safety fencing or caged enclosures. Cobots use built-in force and torque sensors, speed monitoring, and rounded, pinch-free designs to detect contact with a person and immediately stop or reverse motion, meeting ISO 10218 and ISO/TS 15066 safety standards. Traditional industrial robots operate at high speeds and forces behind safety guarding because they are not designed to detect or respond to human contact. Cobots are the right choice for applications that require human-robot interaction — tasks like machine tending, light assembly, quality inspection, and palletizing where an operator works nearby or hands off parts to the robot. They are also easier to program (often through hand-guiding or intuitive software), making them practical for small-batch and high-mix production where tasks change frequently. Traditional robots remain the better choice for high-speed, high-payload, or hazardous applications where human proximity is not needed.
- Industrial sensors detect physical conditions — presence, position, distance, temperature, pressure, level, and more — and convert them into electrical signals that PLCs and controllers use to make decisions. Selecting the right sensor starts with what you need to detect. Inductive proximity sensors detect metal objects at close range without contact and are the standard for detecting machine parts, cylinders at end-of-stroke, and metal targets on conveyors. Photoelectric sensors use light beams to detect objects at longer ranges and work on any material — through-beam, retroreflective, and diffuse types cover different range and mounting scenarios. Capacitive sensors detect both metallic and non-metallic materials including liquids, powders, and plastics, making them useful for level sensing through container walls. Ultrasonic sensors measure distance using sound waves, ideal for level measurement and position sensing of irregular surfaces. Beyond sensing type, consider the mounting environment — temperature, washdown exposure, vibration — and select the appropriate IP rating and housing material.
- Every automated or robotic work cell must include safety equipment to protect personnel from hazardous motion, in compliance with OSHA regulations and machine safety standards such as ANSI/RIA 15.06 and ISO 13849. The specific equipment depends on the risk assessment, but common components include safety light curtains that create an invisible detection field and stop the machine if a person enters the hazardous zone, safety laser scanners that monitor floor-level areas and can define warning and stop zones, safety interlock switches on access doors and gates that cut power when opened, emergency stop buttons placed within reach of operators, and safety-rated PLCs or safety relays that monitor all safety inputs and ensure the machine reaches a safe state before restarting. For collaborative robot applications, the cobot's built-in safety system may reduce the need for external guarding, but a thorough risk assessment is still required to determine whether additional measures — such as area scanners or reduced speed zones — are needed.