Instrumentation, Measurement and Control

Instrumentation refers to devices that measure or control physical variables such as temperature, level, flow, or pressure. These products are essential in the industry because they allow for maximum output with mi...

Categories in Instrumentation, Measurement & Control Products (14)
Pressure Control
Pressure Control

Pressure control products measure, monitor and regulate pressure in liquids, gases and steam. Accurate pressure control protects equipment and keeps processes stable.

Pressure Control Products

  • Gauges – pressure, differential and specialty gauges
  • Pressure transmitters and transducers – electronic monitoring
  • Pressure switches – alarm and control set points
  • Pressure regulators and sequence valves – control downstream pressure
  • Accessories – snubbers, syphons, manifolds and gauge valves

Building a Measurement Point

Choose instrument range, accuracy and wetted materials, then add the right accessories, such as isolation valves and snubbers, for safe, accurate readings.

Centro supplies pressure control instruments and accessories from leading brands.

Shop by type: Pressure Transducers | Pressure Control Accessories | Gauges | Pressure Switch | Pressure Transmitters | Pressure Regulators | Sequence Valves

Related categories: Instrumentation, Measurement and Control | Controllers | Flow Control | Recorders | Seals and Accessories

Seals and Accessories
Seals and Accessories

We are proud to offer a wide selection of industrial seals and accessories for various applications. Our seals are from leading manufacturers with high-quality materials designed to provide long-lasting, reliable performance in demanding industrial environments. We offer various seal types, including O-rings, gaskets, and rotary shaft seals. Our O-rings are available in various sizes and materials, including nitrile, silicone, and fluoroelastomer. They are ideal for use in hydraulic and pneumatic systems, as well as in general-purpose applications. Our gaskets are also made from high-quality materials and are designed to provide a tight, reliable seal in various applications. They come in a wide range of standard sizes, and manufacturers can make special sizes to order. We also carry a wide selection of rotary shaft seals, which are used to seal the gap between a rotating shaft and a stationary housing. These seals help prevent leakage of lubricants and other fluids and are available in various styles and materials to suit different applications. In addition to seals, we also offer a range of accessories to help you install and maintain your seals, including lubricants, sealant, and installation tools.

Shop by type: Diaphragm Seals

Related categories: Instrumentation, Measurement and Control | Flow Control | Pressure Control | Controllers

Controllers
Controllers

Process controllers read signals from sensors and adjust outputs to hold temperature, pressure, flow or level at set point. They range from simple panel meters to advanced PID controllers.

Controller Products

  • PID controllers – precise closed-loop control
  • Process meters – display and alarm process signals
  • Panel meters and displays – local indication

Choosing a Controller

Match inputs (thermocouple, RTD, mA, voltage) and outputs (relay, SSR, analog) to your process. Consider alarms, ramp/soak programming and communications. Panel size (1/16, 1/8, 1/4 DIN) affects layout.

Centro offers controllers and displays for process and temperature control.

Shop by type: Panel Meters and Displays | PID

Related categories: Instrumentation, Measurement and Control | Recorders | Pressure Control | Instrument/Compression Fittings | Flow Control

Recorders
Recorders

Recorders document process conditions over time for quality control, regulatory compliance and troubleshooting. Options range from traditional chart recorders to modern paperless and data logging systems.

Recorder Types

  • Paperless recorders – digital recording with trend displays
  • Chart recorders – circular and strip charts
  • Data loggers – compact, battery-powered recording

Choosing a Recorder

Consider the number of inputs, recording interval, data retrieval and compliance needs. Paperless recorders eliminate charts and pens and simplify data export.

Centro supplies recorders, charts, pens and data loggers.

Shop by type: Data Loggers | Paperless Recorders | Chart Recorders

Related categories: Instrumentation, Measurement and Control | Instrument/Compression Fittings | Controllers | Sensors | Pressure Control

Instrument/Compression Fittings
Instrument/Compression Fittings

Compression fittings are used in a variety of industries for a multitude of applications. Compression fittings are most commonly used in applications where copper or brass tubing is inserted into the fitting. The ferrule then compresses the tubing, creating a watertight seal. Compression fittings can be found in everything from plumbing and refrigeration to automotive and aerospace applications. Our team is proud to offer a wide variety of compression fittings, ensuring that you'll find the perfect solution for your needs. Centro carries instrument and compression tube fittings in stainless steel and brass, along with tubing, valves and adapters to complete your instrument lines. Please browse our website to learn more about our products and services.

Related categories: Instrumentation, Measurement and Control | Sensors | Recorders | Analytical Tools | Controllers

Instrumentation Valves
Instrumentation Valves

Instrumentation valves provide precise fluid control for measurement, sampling, and process control systems. Shop instrumentation solenoid valves for automated on/off switching in control loops, needle valves for fine flow adjustment in analyzer and transmitter installations, proportioning valves for electronically modulated flow control, and air-actuated valves for remote operation in process environments. Built-in materials like 316 stainless steel, brass, and PTFE, these small-bore instrumentation valves are designed for tight spaces, high pressures, and compatibility with gases, liquids, steam, and corrosive media. Browse our full selection of instrumentation valves below to find the right fit for your application, or contact us for sizing and selection assistance.

Related categories: Instrumentation, Measurement and Control | Seals and Accessories | Flow Control | Pressure Control | Controllers

Sensors
Sensors

Industrial sensors monitor humidity, gas, flame, moisture and dew point to protect people, products and equipment. They feed critical data to control and safety systems.

Sensor Categories

  • Humidity sensors – HVAC and environmental control
  • Gas detection sensors – toxic and combustible gases
  • Flame detection sensors – burner and fire safety
  • Moisture in oil sensors – lubrication and transformer monitoring
  • Dew point sensors – compressed air and gas dryness

Choosing a Sensor

Define what you need to measure, the range, accuracy and output signal, plus environmental and hazardous area ratings. Plan for calibration and maintenance.

Centro supplies industrial sensors for monitoring and safety applications.

Shop by type: Humidity Sensors | Gas Detection Sensors | Moisture in Oil Sensors | Dew Point Sensors

Related categories: Instrumentation, Measurement and Control | Analytical Tools | Instrument/Compression Fittings | Level Control | Recorders

Analytical Tools
Analytical Tools

We carry a complete selection of analytical tools for purchase online. This includes everything from analytical probes and transmitters to conductivity probes. Industrial applications often require the use of Analytical Tools including Analytical Probes, Analytical Transmitters, and Conductivity Probes to measure various parameters. These probes can be used to measure things like pH, conductivity, temperature, and more. Each type of probe has its own unique benefits and drawbacks, so it's important to choose the right one for the job at hand. Analytical Probes are often used for measuring pH, as they are very accurate and precise. Analytical Transmitters are good for measuring conductivity, as they are able to transmit a signal over long distances. Conductivity Probes are often used for measuring temperature, as they are very sensitive to changes in temperature. When choosing a probe for an industrial application, it's important to consider the accuracy, precision, and sensitivity of the probe. Analytical Probes, Analytical Transmitters, and Conductivity Probes are all great choices for industrial applications, so it's just a matter of choosing the right one for the job. Whether you need a single piece of equipment or a complete set, we have you covered. We also offer a wide range of accessories so that you can tailor your purchase to your specific needs. And because our products come from leading manufacturers, you can rest assured that you're getting the highest quality tools on the market. So please browse our selection today and find the perfect analytical tool for your needs.

Shop by type: Conductivity | pH

Related categories: Instrumentation, Measurement and Control | Level Control | Sensors | Temperature Measurement, Instrumentation and Control | Instrument/Compression Fittings

Level Control
Level Control

Level control is essential for many industrial and commercial applications, ranging from simple water tanks to complex chemical processing systems. Industrial applications often require control to maintain safe and efficient operations. This can be accomplished through the use of float switches or differential pressure control. Float switches are devices used to measure the level of a liquid in a tank. They work by using a float that is attached to a switch. When the float rises or falls with the level of the liquid, the switch is activated. This can then be used to trigger an alarm or shut off a pump. Differential pressure control is another level control method that uses pressure sensors to measure the difference in pressure between two points. This can be used to determine the liquid level in a tank. Differential pressure control is often used in applications requiring precise level control. We carry a complete selection of level-control products to meet your needs. Our float switches are ideal for small-scale applications, while our radar and differential pressure control systems are designed for more demanding environments. We also offer load cells for use in weight-based level measurement. Whether you need a simple float switch or a sophisticated differential pressure system, we have your level control products.

Shop by type: Bulk Solids | Liquid Level

Related categories: Instrumentation, Measurement and Control | Temperature Measurement, Instrumentation and Control | Analytical Tools | PVF | Sensors

Temperature Measurement, Instrumentation and Control
Temperature Measurement, Instrumentation and Control

We carry a complete selection of temperature measurement, instrumentation, and control devices to suit any industrial or commercial application. For various reasons, temperature measurement, instrumentation, and Control products are critical to industrial systems. Thermocouples, for example, are used extensively in industry to measure temperatures in a wide range of applications. Temperature switches are used to control the temperature of a process or system. All three of these products are essential to properly functioning industrial systems. Whether you need a simple temperature gauge for an easy fix or a sophisticated control system for a large factory, we have the products and expertise to meet your needs. Thermocouples, temperature switches, thermometers, and transmitters are available online, and our knowledgeable staff is always on hand to answer any questions. So please browse our selection today and find the perfect solution for your temperature monitoring needs.

Shop by type: Heat Exchangers | Temperature Accessories | Thermometers | Thermocouples and RTDs | Temperature Switches | Temperature Controllers | Temperature Recording | Temperature Transmitters

Related categories: Instrumentation, Measurement and Control | PVF | Level Control | Swivel Joints | Analytical Tools

Swivel Joints
Swivel Joints

Swivel joints are crucial components used to connect pipes or hoses in a fluid system, allowing for rotation and movement in various directions. These versatile joints are commonly employed in industries like oil and gas, chemical processing, and firefighting, where flexible connections are essential to accommodate movement, vibration, and thermal expansion. Swivel joints provide a reliable solution for preventing hose or pipe kinks, reducing stress on equipment, and enabling smooth fluid transfer even in challenging environments. With different sizes, materials, and pressure ratings available, swivel joints offer the flexibility needed to meet specific application requirements and ensure efficient fluid handling.

Related categories: Instrumentation, Measurement and Control | Hydraulic Accessories | PVF | Temperature Measurement, Instrumentation and Control | Level Control

Flow Control
Flow Control

Flow control products measure, monitor and regulate the movement of liquids and gases through a process. Accurate flow data helps you control dosing, track usage, protect pumps from running dry and confirm that cooling, lubrication and treatment systems are working.

Flow Control Products

  • Flow meters – magnetic, turbine, positive displacement, thermal and variable area
  • Flow switches – alarm or shut down when flow drops too low or rises too high
  • Flow sensors and transmitters – send continuous flow signals to your control system
  • pH and conductivity instruments – monitor water quality along with flow
  • Flow control accessories – fittings, displays and mounting hardware

Choosing a Technology

The fluid decides the technology. Magnetic meters need a conductive liquid, thermal meters are built for gases, and positive displacement meters handle viscous oils. Consider accuracy, pipe size, pressure drop, straight-run requirements and the output your controller needs.

Centro's instrumentation team can help you select flow control products that match your fluid, line size and accuracy needs.

Shop by type: Flow, pH & Conductivity Meters, Transmitters & Controllers | Flow Control Accessories | Flow Sensors | Flow Meters | Flow Transmitters | Flow Switches

Related categories: Instrumentation, Measurement and Control | Pressure Control | Seals and Accessories | Controllers

PVF
PVF

When it comes to instrumentation systems, precision and reliability are key. Pipes, valves, and fittings (PVF) are critical in maintaining accurate measurements, controlling pressure, and ensuring smooth operation in industrial processes. Stauff PVF products are designed to handle high pressures, temperature fluctuations, and corrosive environments, making them ideal for industries like oil and gas, chemical processing, power generation, and manufacturing.

What Stauff PVF Products Do We Offer?

We provide a full range of Stauff PVF components built for instrumentation applications, including:

  • Instrumentation tubing – High-quality stainless steel tubing for precise fluid and gas control.
  • Needle valves – Allow for fine adjustments and accurate flow regulation.
  • Ball valves – Provide quick on/off control for efficient system management.
  • Check valves – Prevent backflow and protect sensitive instrumentation.
  • Tube fittings and adapters – Available in various configurations to ensure leak-free connections.
  • Manifold valves – Streamline pressure control and system isolation in complex setups.

Why Choose Stauff PVF Products?

  • Precision-engineered for demanding applications.
  • Corrosion-resistant materials ensure durability in harsh environments.
  • Leak-free performance keeps systems running efficiently.
  • Wide compatibility with different instrumentation setups.

Find the Right PVF Solution

Whether you're setting up a new instrumentation system or upgrading existing components, Stauff PVF products offer the reliability and performance you need. Browse our selection online or reach out to our team for expert guidance in choosing the right components for your application.

Related categories: Instrumentation, Measurement and Control | Swivel Joints | Temperature Measurement, Instrumentation and Control | Hydraulic Accessories | Level Control

Hydraulic Accessories
Hydraulic Accessories

Hydraulic accessories keep hydraulic systems clean, sealed and reliable. Filters and O-rings are small parts that prevent costly failures.

Accessories Available

  • Hydraulic filters – pressure, return and suction
  • Hydraulic O-rings – seals for fittings and components
  • Breathers – reservoir protection
  • Gauges – system monitoring

Maintenance Tips

Monitor filter indicators, replace seals during service and keep oil clean to extend component life.

Centro supplies hydraulic accessories.

Shop by type: Hydraulic Filters | Hydraulic O-Rings

Related categories: Instrumentation, Measurement and Control | Swivel Joints | PVF | Temperature Measurement, Instrumentation and Control | Level Control

Filter
Filter
161,220 items
content loaded
The ITC 450 Series LED level process display and controller is the industry's most rugged and reliable wall-mount remote level display. LevelPro ITC 450 Series comes as a complete all-in-one unit, out of the box it is ready to use. The industrial design of the ITC 450 Series ensures hat it will withstand the industry's most corrosive environments. Available with either 4 Relay Outputs or 2 Relay + 4-20mA Output, the ITC 450 Series is great for automating your tank level processes.
Configure Product

Configure product to see pricing

Featuring a 2" connection, PVC, and a customizable length from 6" to 24", the LevelPro PLA Series Float Level Switch includes an LED light for clear visual status. Ideal for non-viscous liquids, it integrates seamlessly with PLCs or relay controllers, making it perfect for automating tanks, controlling pumps, or managing valves in various applications.
Configure Product

Configure product to see pricing

The PLF Liquid Level Float Switch provides liquid level detection up to 10′(3m) with 1-8 level switch points and a compact junction box for wiring termination. This all plastic level switch package is selected for day tank, skid or machine, cooling tower, waste sump or process tank applications, and can be connected directly to a PLC or relay controller. It makes a perfect on | off switch for pumps or valves and can be used to completely automate your tank. The PLF is only suitable for non-viscous and non-coating liquids.
Configure Product

Configure product to see pricing

The Levelpro PLS Series compact level switches combine low cost and reliability with fast, simple installation. The all plastic level switches contain an hermetically sealed reed switch that is actuated by magnets that are permanently bonded inside the float. They can be easily adapted to open or close a circuit based on the rising or falling of the liquid level. The switch action can be reversed by removing the float, rotating it end-for-end and replacing it on the stem. Vertical models mount internally, oriented within 45° of vertical, or select optional fittings for external mounting. Switch ratings are suitable for many solidstate control systems and small monitors or alarms. Simple relay interfaces can be used for higher current applications such as pumps and on-off valve actuators.
Configure Product

Configure product to see pricing

The LevelPro® ShoPro® is a robust, wall and pipe-mounted liquid level display and controller. It combines precision, durability, and ease of use. Designed for harsh environments, it ensures accurate and reliable liquid level monitoring across various industries.
Configure Product

Configure product to see pricing

The TankPro® Continuous Level Sensor Transmitter provides continuous level measurement for both corrosive and non-corrosive liquids. These submersible hydrostatic transmitters have been designed for the toughest industrial applications. Unlike ultrasonic level transmitters, our liquid level sensors are completely unaffected by any foam, vapor, turbulence or condensate in the tank.
Configure Product

Configure product to see pricing

The LP200 Pressure Transmitter was designed to measure Pressure or Level within industry’s most demanding corrosive process applications. When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into a threaded process pipe tee fitting. The LP200 implements a state of the art ceramic measuring principle that changes the physical pressure which equates to no more than a few microns into a linear electronic signal that can be measured. This minimal deformation equates to negligible material strain of the ceramic electronic pressure-sensing diaphragm resulting in high resistance to alternating loads and long-term durability. Exactly what is required for tough industrial applications.
Configure Product

Configure product to see pricing

Icon LevelPro TPP Series - Plastic Temperature Probe

Configure product to see pricing

The TPP Series Plastic Temperature Probe offers superior corrosion resistance and ±0.5% F.S accuracy, featuring 2-wire 4-20mA loop-powered operation and an optional local LED display. The TPP Series is designed for reliable performance in harsh environmental conditions.
Configure Product

Configure product to see pricing

ICON Lotorq LT Series - Full Faced ANSI Flange Gaskets

Configure product to see pricing

The Truflo® Lotorq LT Series Flange Gaskets are recommended for all types of non-metal plastic flanged connections to prevent initial breakage due to bolt over-tightening.The unique double raised O-Ring Design provides excellent sealing with 75% less bolt torque required for flat face gaskets. The PTFE gaskets have PTFE Teflon® sheet material bonded directly to the EPDM. The LT Series is ideal for Thermoplastic Piping Systems for applications up to 250 psi.
Configure Product

Configure product to see pricing

Tough but sensitive — High performance with industrial strength 316L stainless steel Sanitary connection conductivity sensor transmitter. The ProCon® C350 series double electrode conductivity sensor transmitter with sanitary connections have been proven to operate seamlessly in industrial applications up to 2,000µS/cm. Measuring the specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water. The measurement accuracy is greatly affected by temperature variation, the polarization of the contact electrode surface, and cable capacitance. The ProCon® line of analytical sensors has been designed for difficult industrial applications and to outperform even in extreme conditions. The 2-wire 4-20mA, 4-wire, or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

The ProCon® C500 series is an extremely robust industrial corrosion-resistant conductivity, resistivity, TDS, and salinity controller. The modular design is easy to install and operate and provides first measurement values in under one minute. It is excellent for process control, water quality, sanitization and neutralization systems, effluent monitoring, pool and spa control, aquatic animal systems, and cooling towers. The controller includes all the extra features; there is no need to pay extra for a relay, 4-20mA, or RS485 outputs. The SimpICal® feature makes calibrating the sensor easier and quicker than ever, and the cost-saving quick and straightforward setup is done through the user-friendly step-by-step on-screen menu. Active display of red alarm LED provides notification of out-of-bounds sensor readings and indication for sensor cleaning, recalibration, or replacement. The controller is packaged in a rugged polycarbonate enclosure, ideally suited for heavy-duty applications. A mounting kit is included for surface and panel mounting. Pipe mounting kits and 120VAC options are available; call us for a quote. Note: All electrical connections should be checked before use.
Configure Product

Configure product to see pricing

Tough but sensitive — High performance with industrial strength titanium alloy electrode. The ProCon® C650 series double electrode conductivity sensor transmitter has been proven to operate seamlessly in industrial applications up to 200,000µS/cm. Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water. The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, and cable capacitance. The ProCon® line of analytical sensors have been designed for difficult industrial applications and to outperform even in extreme conditions. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

The ProCon® C720 series is an extremely robust corrosion resistant single or double screen conductivity/resistivity/TDS/salinity controller. The modular design is both easy to install and operate providing first measurement values in under one minute. The C700 is packed with all the extra features included. No need to pay extra for relay, 4-20mA or RS485 outputs. The SimplCal® feature makes calibrating your sensor easier and quicker than ever before. The cost-saving quick and simple setup is done through our user-friendly step-by step on-screen menu. Active display of red alarm LED provides notification of out of bounds sensor readings and indication for sensor cleaning/recalibration or replacement.
Configure Product

Configure product to see pricing

This rugged stainless steel sensor transmitter is available in 4 different cell classes, making it the perfect choice for high temperature applications. The ProCon® C950 series double electrode conductivity sensor transmitter has been proven to operate seamlessly in industrial applications up to 200,000µS/cm. Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water. The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, and cable capacitance. The ProCon® line of analytical sensor transmitters have been designed for difficult industrial applications and to outperform even in extreme conditions. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

The ProCon® D500 & D520 series is a robust industrial pH & ORP controller. It provides first measurement values in under one minute. The modular design is easy to install and operate. The controller includes all the extra features; there is no need to pay extra for a relay, 4-20mA, or RS485 outputs. The SimpICal® feature makes calibrating the sensor easier and quicker, and the cost-saving quick and straightforward setup is done through the user-friendly step-by-step on-screen menu. Active display of red alarm LED provides notification of out-of-bounds sensor readings and indication for sensor cleaning, recalibration, or replacement. The controller is packaged in a rugged polycarbonate enclosure, ideally suited for heavy-duty applications. A mounting kit is included for surface and panel mounting. Pipe mounting kits are available;
Configure Product

Configure product to see pricing

ICON ProCon D720 pH/ORP Dual Channel Display & Controller
Configure Product

Configure product to see pricing

High performance industrial sensor for desulphurization applications. The ProCon® P14D Nexus® series high performance analytical sensors have been designed for ruggedness, longevity, accuracy and ease of use. The double junction coupled with the solid Nexus® KCl infused reference makes the P14D pH sensor an excellent choice for desulfurization environment applications. All measurement functions are combined in one compact body — measuring electrode, temperature sensor and an inner reference chamber. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

ICON ProCon P14F Series pH Sensor for HF < 1000ppm

Configure product to see pricing

The ultimate sensor for demanding HF applications (HF < 1000ppm). The ProCon® P14F Nexus® series sensors offer a Hydrofluoric Acid (HF) chemically resistant antimony measuring sensor. The P14F sensor has been specifically designed to accurately measure HF acid. It incorporates the Nexus® KCl double reference junction eliminating reference poisoning and coating build-up, extending longevity. The enhanced features ensure measure stability and fast response times in very demanding applications where HF is present. All measurement functions are combined in one compact body — measuring electrode, temperature sensor, and an inner reference chamber. The Procon® innovative reference design, combined with 2-wire 4-20mA, 4-wire, or 4-20mA + RS485 make these sensors an excellent choice for your industrial HF pH applications.
Configure Product

Configure product to see pricing

Engineered for accuracy, ruggedness and longevity in general process applications. The robust sensor design of the versatile ProCon® P14G confidently offers long-term reliability with fast response times and high accuracy in a wide range of general process applications. These sensors are have been specifically engineered with a double ceramic reference diaphragms that provide highly responsive pH indication. The double salt bridge junction coupled with the PTFE reference technology is the foundation for all P14G series electrodes. The inner reference chamber is charged with potassium chloride (KCl) gel. All measurement functions are combined in one compact body — measuring electrode, temperature sensor and an inner reference chamber. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

ICON ProCon P14H Series pH Sensor for HF > 1000ppm

Configure product to see pricing

The ultimate sensor for demanding HF applications (HF < 1000ppm). The ProCon® P14H Nexus® series pH sensor transmitter offer a Hydrofluoric Acid (HF) chemically resistant glass measuring sensor. The P14H sensor transmitter has been specifically designed to accurately measure HF acid. It incorporates the Nexus® KCl double reference junction eliminating reference poisoning and coating build-up, extending longevity. The enhanced features ensure measure stability and fast response times in very demanding applications where HF is present. All measurement functions are combined in one compact body — measuring electrode, temperature sensor, and an inner reference chamber. The Procon® innovative reference design, combined with 2-wire 4-20mA, 4-wire, or 4-20mA + RS485 make these sensors an excellent choice for your industrial HF pH applications.
Configure Product

Configure product to see pricing

High performance industrial sensor for Seawater Applications. The ProCon® P14S series offers the ultimate combination of durability, functionality and long-term performance; exactly what is required for seawater applications. The double junction coupled with the solid Nexus® KCl infused reference eliminates reference poisoning and makes the P14S pH sensor transmitter an excellent choice for salt water applications. All measurement functions are combined in one compact body — measuring electrode, temperature sensor and an inner reference chamber. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

ICON ProCon Pipe Saddle Fitting
MPN:ICON-00-PIPE-SADDLE-FITTING

Configure product to see pricing

ICON ProCon Pipe Saddle Fitting
Configure Product

Configure product to see pricing

The principle of the turbidity sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the turbidity value. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The ProCon® TB550 features stable data, reliable performance and built-in self-diagnosis function ensure accurate data. Simple installation and calibration get you up and running quickly. The automatic self-cleaning function ensures you stay that way.
Configure Product

Configure product to see pricing

ICON ProCon True Union Tee Fitting

Configure product to see pricing

TUPA Series Analytical Sensor Installation fittings features a true union design, PVC/PP/PVDF body options, and exceptional chemical resistance.
Configure Product

Configure product to see pricing

The ITC 450 Series LED level process display and controller is the industry's most rugged and reliable wall-mount remote level display. LevelPro ITC 450 Series comes as a complete all-in-one unit, out of the box it is ready to use. The industrial design of the ITC 450 Series ensures hat it will withstand the industry's most corrosive environments. Available with either 4 Relay Outputs or 2 Relay + 4-20mA Output, the ITC 450 Series is great for automating your tank level processes.
Configure Product

Configure product to see pricing

Featuring a 2" connection, PVC, and a customizable length from 6" to 24", the LevelPro PLA Series Float Level Switch includes an LED light for clear visual status. Ideal for non-viscous liquids, it integrates seamlessly with PLCs or relay controllers, making it perfect for automating tanks, controlling pumps, or managing valves in various applications.
Configure Product

Configure product to see pricing

The PLF Liquid Level Float Switch provides liquid level detection up to 10′(3m) with 1-8 level switch points and a compact junction box for wiring termination. This all plastic level switch package is selected for day tank, skid or machine, cooling tower, waste sump or process tank applications, and can be connected directly to a PLC or relay controller. It makes a perfect on | off switch for pumps or valves and can be used to completely automate your tank. The PLF is only suitable for non-viscous and non-coating liquids.
Configure Product

Configure product to see pricing

The Levelpro PLS Series compact level switches combine low cost and reliability with fast, simple installation. The all plastic level switches contain an hermetically sealed reed switch that is actuated by magnets that are permanently bonded inside the float. They can be easily adapted to open or close a circuit based on the rising or falling of the liquid level. The switch action can be reversed by removing the float, rotating it end-for-end and replacing it on the stem. Vertical models mount internally, oriented within 45° of vertical, or select optional fittings for external mounting. Switch ratings are suitable for many solidstate control systems and small monitors or alarms. Simple relay interfaces can be used for higher current applications such as pumps and on-off valve actuators.
Configure Product

Configure product to see pricing

The LevelPro® ShoPro® is a robust, wall and pipe-mounted liquid level display and controller. It combines precision, durability, and ease of use. Designed for harsh environments, it ensures accurate and reliable liquid level monitoring across various industries.
Configure Product

Configure product to see pricing

The TankPro® Continuous Level Sensor Transmitter provides continuous level measurement for both corrosive and non-corrosive liquids. These submersible hydrostatic transmitters have been designed for the toughest industrial applications. Unlike ultrasonic level transmitters, our liquid level sensors are completely unaffected by any foam, vapor, turbulence or condensate in the tank.
Configure Product

Configure product to see pricing

The LP200 Pressure Transmitter was designed to measure Pressure or Level within industry’s most demanding corrosive process applications. When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into a threaded process pipe tee fitting. The LP200 implements a state of the art ceramic measuring principle that changes the physical pressure which equates to no more than a few microns into a linear electronic signal that can be measured. This minimal deformation equates to negligible material strain of the ceramic electronic pressure-sensing diaphragm resulting in high resistance to alternating loads and long-term durability. Exactly what is required for tough industrial applications.
Configure Product

Configure product to see pricing

Icon LevelPro TPP Series - Plastic Temperature Probe

Configure product to see pricing

The TPP Series Plastic Temperature Probe offers superior corrosion resistance and ±0.5% F.S accuracy, featuring 2-wire 4-20mA loop-powered operation and an optional local LED display. The TPP Series is designed for reliable performance in harsh environmental conditions.
Configure Product

Configure product to see pricing

ICON Lotorq LT Series - Full Faced ANSI Flange Gaskets

Configure product to see pricing

The Truflo® Lotorq LT Series Flange Gaskets are recommended for all types of non-metal plastic flanged connections to prevent initial breakage due to bolt over-tightening.The unique double raised O-Ring Design provides excellent sealing with 75% less bolt torque required for flat face gaskets. The PTFE gaskets have PTFE Teflon® sheet material bonded directly to the EPDM. The LT Series is ideal for Thermoplastic Piping Systems for applications up to 250 psi.
Configure Product

Configure product to see pricing

Tough but sensitive — High performance with industrial strength 316L stainless steel Sanitary connection conductivity sensor transmitter. The ProCon® C350 series double electrode conductivity sensor transmitter with sanitary connections have been proven to operate seamlessly in industrial applications up to 2,000µS/cm. Measuring the specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water. The measurement accuracy is greatly affected by temperature variation, the polarization of the contact electrode surface, and cable capacitance. The ProCon® line of analytical sensors has been designed for difficult industrial applications and to outperform even in extreme conditions. The 2-wire 4-20mA, 4-wire, or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

The ProCon® C500 series is an extremely robust industrial corrosion-resistant conductivity, resistivity, TDS, and salinity controller. The modular design is easy to install and operate and provides first measurement values in under one minute. It is excellent for process control, water quality, sanitization and neutralization systems, effluent monitoring, pool and spa control, aquatic animal systems, and cooling towers. The controller includes all the extra features; there is no need to pay extra for a relay, 4-20mA, or RS485 outputs. The SimpICal® feature makes calibrating the sensor easier and quicker than ever, and the cost-saving quick and straightforward setup is done through the user-friendly step-by-step on-screen menu. Active display of red alarm LED provides notification of out-of-bounds sensor readings and indication for sensor cleaning, recalibration, or replacement. The controller is packaged in a rugged polycarbonate enclosure, ideally suited for heavy-duty applications. A mounting kit is included for surface and panel mounting. Pipe mounting kits and 120VAC options are available; call us for a quote. Note: All electrical connections should be checked before use.
Configure Product

Configure product to see pricing

Tough but sensitive — High performance with industrial strength titanium alloy electrode. The ProCon® C650 series double electrode conductivity sensor transmitter has been proven to operate seamlessly in industrial applications up to 200,000µS/cm. Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water. The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, and cable capacitance. The ProCon® line of analytical sensors have been designed for difficult industrial applications and to outperform even in extreme conditions. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

The ProCon® C720 series is an extremely robust corrosion resistant single or double screen conductivity/resistivity/TDS/salinity controller. The modular design is both easy to install and operate providing first measurement values in under one minute. The C700 is packed with all the extra features included. No need to pay extra for relay, 4-20mA or RS485 outputs. The SimplCal® feature makes calibrating your sensor easier and quicker than ever before. The cost-saving quick and simple setup is done through our user-friendly step-by step on-screen menu. Active display of red alarm LED provides notification of out of bounds sensor readings and indication for sensor cleaning/recalibration or replacement.
Configure Product

Configure product to see pricing

This rugged stainless steel sensor transmitter is available in 4 different cell classes, making it the perfect choice for high temperature applications. The ProCon® C950 series double electrode conductivity sensor transmitter has been proven to operate seamlessly in industrial applications up to 200,000µS/cm. Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water. The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, and cable capacitance. The ProCon® line of analytical sensor transmitters have been designed for difficult industrial applications and to outperform even in extreme conditions. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

The ProCon® D500 & D520 series is a robust industrial pH & ORP controller. It provides first measurement values in under one minute. The modular design is easy to install and operate. The controller includes all the extra features; there is no need to pay extra for a relay, 4-20mA, or RS485 outputs. The SimpICal® feature makes calibrating the sensor easier and quicker, and the cost-saving quick and straightforward setup is done through the user-friendly step-by-step on-screen menu. Active display of red alarm LED provides notification of out-of-bounds sensor readings and indication for sensor cleaning, recalibration, or replacement. The controller is packaged in a rugged polycarbonate enclosure, ideally suited for heavy-duty applications. A mounting kit is included for surface and panel mounting. Pipe mounting kits are available;
Configure Product

Configure product to see pricing

ICON ProCon D720 pH/ORP Dual Channel Display & Controller
Configure Product

Configure product to see pricing

High performance industrial sensor for desulphurization applications. The ProCon® P14D Nexus® series high performance analytical sensors have been designed for ruggedness, longevity, accuracy and ease of use. The double junction coupled with the solid Nexus® KCl infused reference makes the P14D pH sensor an excellent choice for desulfurization environment applications. All measurement functions are combined in one compact body — measuring electrode, temperature sensor and an inner reference chamber. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

ICON ProCon P14F Series pH Sensor for HF < 1000ppm

Configure product to see pricing

The ultimate sensor for demanding HF applications (HF < 1000ppm). The ProCon® P14F Nexus® series sensors offer a Hydrofluoric Acid (HF) chemically resistant antimony measuring sensor. The P14F sensor has been specifically designed to accurately measure HF acid. It incorporates the Nexus® KCl double reference junction eliminating reference poisoning and coating build-up, extending longevity. The enhanced features ensure measure stability and fast response times in very demanding applications where HF is present. All measurement functions are combined in one compact body — measuring electrode, temperature sensor, and an inner reference chamber. The Procon® innovative reference design, combined with 2-wire 4-20mA, 4-wire, or 4-20mA + RS485 make these sensors an excellent choice for your industrial HF pH applications.
Configure Product

Configure product to see pricing

Engineered for accuracy, ruggedness and longevity in general process applications. The robust sensor design of the versatile ProCon® P14G confidently offers long-term reliability with fast response times and high accuracy in a wide range of general process applications. These sensors are have been specifically engineered with a double ceramic reference diaphragms that provide highly responsive pH indication. The double salt bridge junction coupled with the PTFE reference technology is the foundation for all P14G series electrodes. The inner reference chamber is charged with potassium chloride (KCl) gel. All measurement functions are combined in one compact body — measuring electrode, temperature sensor and an inner reference chamber. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

ICON ProCon P14H Series pH Sensor for HF > 1000ppm

Configure product to see pricing

The ultimate sensor for demanding HF applications (HF < 1000ppm). The ProCon® P14H Nexus® series pH sensor transmitter offer a Hydrofluoric Acid (HF) chemically resistant glass measuring sensor. The P14H sensor transmitter has been specifically designed to accurately measure HF acid. It incorporates the Nexus® KCl double reference junction eliminating reference poisoning and coating build-up, extending longevity. The enhanced features ensure measure stability and fast response times in very demanding applications where HF is present. All measurement functions are combined in one compact body — measuring electrode, temperature sensor, and an inner reference chamber. The Procon® innovative reference design, combined with 2-wire 4-20mA, 4-wire, or 4-20mA + RS485 make these sensors an excellent choice for your industrial HF pH applications.
Configure Product

Configure product to see pricing

High performance industrial sensor for Seawater Applications. The ProCon® P14S series offers the ultimate combination of durability, functionality and long-term performance; exactly what is required for seawater applications. The double junction coupled with the solid Nexus® KCl infused reference eliminates reference poisoning and makes the P14S pH sensor transmitter an excellent choice for salt water applications. All measurement functions are combined in one compact body — measuring electrode, temperature sensor and an inner reference chamber. The 2-wire 4-20mA, 4-wire or 4-20mA + RS485 output options simplify calibration and communication with remote displays and controllers.
Configure Product

Configure product to see pricing

ICON ProCon Pipe Saddle Fitting
MPN:ICON-00-PIPE-SADDLE-FITTING

Configure product to see pricing

ICON ProCon Pipe Saddle Fitting
Configure Product

Configure product to see pricing

The principle of the turbidity sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the turbidity value. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The ProCon® TB550 features stable data, reliable performance and built-in self-diagnosis function ensure accurate data. Simple installation and calibration get you up and running quickly. The automatic self-cleaning function ensures you stay that way.
Configure Product

Configure product to see pricing

ICON ProCon True Union Tee Fitting

Configure product to see pricing

TUPA Series Analytical Sensor Installation fittings features a true union design, PVC/PP/PVDF body options, and exceptional chemical resistance.
Configure Product

Configure product to see pricing

FAQS