content loaded
Image may not be the actual product. Please refer to the full technical specs and MPN for exact details.
Typically ships within 2-4 weeks
Can I get this faster?
Subject to factory lead times
$2,103.99
Questions? Call 1-866-703-5665
Expedited Shipping, Delivery Date, Product Questions & Help
Schunk GSM-P 32-IS-S-090 - Rotary gripping module
MPN: 304732
Typically ships within 2-4 weeks
Can I get this faster?
Subject to factory lead times
$2,103.99
Questions? Call 1-866-703-5665
Expedited Shipping, Delivery Date, Product Questions & Help
- Overview
- Features
Rotary gripping module with parallel gripper GSM-P, Size: 32, pneumatic, with gripping force maintenance: IS, End position damping: hydr. damper - GSM-P 32-IS-S-090
- Middle attached load - Valve switching times, hose fill times, or PLC reaction times are not included, and are to be considered when cycle times are calculated.
- Workpiece weight - is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
- Housing material - Combined rotor and piston drive
- Closing, opening and swiveling times - Closing and opening times are movement times of the base jaws or fingers only. Swivel times are the pure movement timesof the rotating part.
- Warranty - pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
- Scope of delivery - 24 months
- Finger length - is measured from the reference surface as the distance P in direction to the main axis.
- Actuation - Steel
- Base jaw material - Aluminum alloy, anodized
- Repeat accuracy - is defined as a distribution of the end Position for 100 consecutive strokes.
- Operating principle - intended to represent a typical load. It is defined as the half of the max. possible mass moment of inertia that can be swiveled without restriction, bouncing or hitting, with a centric load and a vertical rotating axis.
- Gripping force maintenance device - Centering sleeves, O-rings for direct connection, screws for lateral fastening, steel balls for adjustment of the swiveling angle, assembly and operation manual with declaration of incorporation
- Gripping force - is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Ambient Temperature: 5 °C Height: 112.5 mm IP Rating: 30 Length: 40 mm Operating Pressure: 6 Bar Weight: 0.42 kg
"Our mission is to be regarded by our customers and our community as the best supplier of automation and control product solutions to industry."
Michael R Gallagher
Centro President